N1MM Logger Base Install (New users: Do not run this version! Install this, then install the latest version)

Version 10.0.0 Full Install (14 MB) This supersedes 9.0.0. -- Download
If you are not running Version 10 or later, you need to install the version above before installing *one* of the versions below. Each update includes all changes from 10.0.0 on. In general, you may then install earlier or later versions on top of one another. Bugs are fixed only in the current version. Please confirm bugs in the current version.
Notes:
- You may go back and forth between V9 and V10 versions. Just download and install.
- Do not uninstall/reinstall. These versions are intended to be reinstalled on top of each other.
- Make a backup of your install directory on a regular basis, especially if upgrading from older versions!

Latest Versions

Version 11.05.01 (Started May 12, 2011) -- Download
New Radio: Added IC-9100 with radio codec support. Report any issues. (coded by K3CT)
WinKey & COM PTT: Do not allow WinKey and COM port PTT (DTR or RTS) to be enabled at the same time on the same COM port. (coded by K3CT)
Kenwood: Added support for Kenwood ACC2 port AFSK using PTT via radio command. This required the modification of the radio COM port setup window. A new Digital Modes Acc Jack Radio Command PTT option is displayed when the TS-480, TS-590, or TS-2000 radio is selected. It is not possible to use the ACC2 input for AFSK modes along with the standard hardware PTT input and software PTT via radio command. This is a radio firmware limitation. (coded by K3CT)
PTT via Radio Command: Added separate options to enable PTT via Radio Command by CW, SSB, or Digital mode. The PTT routine was resequenced to execute the radio command PTT code before the hardware PTT code. Another new option, "Energize Hardware & Software PTT" allows the user to bypass hardware PTT (DTR/RTS) if software PTT by mode (PTT via radio command) is selected. When "Energize Hardware & Software PTT" is checked, the code will toggle both PTT sources like the prior versions of the program code. Unchanged from prior versions, if WinKey is used, the WinKey PTT in CW mode will always be toggled. To aid in the conversion to the new PTT by mode options, the program will automatically set the new options to be compatible with the prior program operation during the first program start. (coded by K3CT)
TS-590: When using the TS-590 radio codec for SSB or digital modes, check the new radio COM port PTT via Radio Command for the appropriate mode(s). Previous versions required the PTT by command to be unchecked which wasn't intuitive. The user must also set radio menu 63 to select the radio codec or ACC2 for audio input. (coded by K3CT)
Logging: Added additional error checks of database fields before storing the QSO in the database. Add the same database field checks before storing an edited contact. (coded by K3CT)
COM PTT: Prevent DTR and RTS PTT from being selected at the same time on the same COM port. (coded by K3CT)
HI QSO Party: Updates to the new rules. (AH0A) (coded by K3CT)
Reverse CW: Added Reverse CW option per radio when SO2R is selected. During the first program start, if radio control enabled, the new reverse CW options per radio will be set based on the previous value of Use Reverse CW. (KK7S) (coded by K3CT)
Band Up/Dn: When using the Band Up/Down keyboard commands the mode may not be set correctly when using CW-R. (KK7S) (coded by K3CT)

Version 11.05.00 (Started May 1, 2011) -- Download
Corrects Cabrillo output for BARTG 75 Sprint Module (Coded by N2AMG)
Corrects Web address for BARTG Contests (Coded by N2AMG)
Removes un-necessary SetXmit calls in Digital windows and PSK engines. (Coded by N2AMG)
EU PSK DX Contest, corrections made to EUAREACDS.sec file - it has new EU Areas List in it, Cabrillo ver. 3.0 enabled, (UT7FP) (coded by NA3M)
Corrects Configurer window from reopening after closing when no radio is attached. (Coded by N2AMG)
CQ-M Contest: /MM stations should not give multiplier (only 3 points), one multiplier for EU or AS part of Russia (RA/RA9), Cty-CQM.dat file, time of the contest and link to the rules corrected, Cabrillo ver. 3.0 enabled (RA3TT) (coded by NA3M)

Version 11.04.05 (Started April 21, 2011) -- Download
Winkey not detected message changed to a status bar warning (Coded by N1MM)
Rescore would repeatedly show contacts as changed when points or mult status changed. (NA3M) (Coded by N1MM)
Available window: IsWorkable not called for mults. (NA3M) (Coded by N1MM)
Bandmap: IsWorkable not called for calls in bandmap (NA3M) (Coded by N1MM)
Entry window: IsWorkable not checked for calls in call textbox (NA3M) (Coded by N1MM)
Corrected wording of out-of-date wl_cty.dat message. (K3CT) (Coded by N1MM)
bug fix, UDC contests, if parameter PointsPerContact is not set give 1 point per QSO but not 0 (UA3MIF) (coded by NA3M)
UA1DZ Cup contest (DZCUP), only SP and LO RDA districts should be displayed in Multipliers window for stations outside SP/LO (UA3MIF) (coded by NA3M)
bug fix, UA1DZ Cup contest (DZCUP), special station R73DZ should not give any points for SP/LO stations (RD1A) (coded by NA3M)
Available window, mode filter set to the window does effect the Mults column numbers (UT2IO) (coded by NA3M)
Available window, show mults callsigns (max 10) in tooltip text for mults numbers to aid in usage & debugging (coded by NA3M)
SpringVHF&UpSprint: Made grid textbox large enough for 6 character grids (W9RM) (Coded by NA3M)
Available window, mode filter set to the window does effect the Mults and Qs columns numbers (UT2IO) (coded by NA3M)
Available window, show mults callsigns (max = 10) in tooltip text for mults numbers to aid in usage & debugging (coded by NA3M)
minor correction to Cabrillo format for DZCUP contest (RD1A) (coded by NA3M)
UDC contests, Rover support added (K3TUF) (coded by NA3M)
UDC contests, modified DupeSQLString parameter to allow logging rover stations in VHF contests (K3TUF) (coded by NA3M)

Version 11.04.04 (Started April 15, 2011) -- Download
Restored error handling to DB torow code (Coded by N1MM)
Removed CWJFMM (now CQMMDX), RSGBCMWLTH (now RSGBBERU) & ANARTSRTTY (now DLDCRTTY) from list of available new contests (VE3KI) (Coded by N1MM)
MMVARI - Corrects when using 2 channels the second channel's waterfall would open in an overloaded state. (Coded by N2AMG)
MMVARI - Corrects PSK Engine1 from not remembering Align on Left Click setting. Would always open in On state. (Coded by N2AMG)
Digital - Corrects when switching from Digital mode to CW or SSB would and digital offset enabled. (Coded by N2AMG)
Have main program show "Winkey not detected" message. (coded by N1MM)
Check for 3315 errors (zero length fields) on packet spots (Coded by N1MM)
Move check for old wl_cty.dat to later in initialization. Changed to Yes/No selection to invoke load country file menu selection (Coded by N1MM)
new UDC contest VHF-SPRING added (W9GKA, N8RA) (coded by NA3M)
minor corrections to UDC contest URAL CUP (coded by NA3M)
bug fix - information from Call History file was not used to set proper callsign color in Band Map(s) (UA3MIF) (coded by NA3M)

Version 11.04.03 (Started April 13, 2011) -- Download
new contest RCC (Russian Contest Club) Cup added (R2AA) (coded by NA3M)
bug fix, GCup (Gagarin Cup) contest - entering a stateside call containing a / caused a program error, memorial callsigns were saved in the log instead of zone (K2DB ,8P3A) (coded by K3CT, NA3M)
UA1DZ Cup contest - updated points calculation per new rules (RD1A) (coded by NA3M)
bug fix, RFCCW/RFCSSB contests (and other that use several time periods) - mults and dupes in the Band Map were not resetting automatically in new time session (UA3MIF) (coded by NA3M)
bug fix - extra folder with the contest name was created in the main folder automatically if QSO recording enabled (UA3MIF) (coded by NA3M)

Version 11.04.02 (Started April 10, 2011) -- Download
SD QSO Party: Rules changes for in-state users. Please test. (K0RC) (coded by K3CT)
GCup Bug: Entering a stateside call containing a / caused a program error. (K2DB) (coded by K3CT)

Version 11.04.01 (Started April 6, 2011) -- Download
QCWA QP: Added bonus QSO point logic for W2MM. (KO4GS) (coded by K3CT)
MT QP: Update to the 2011 rules. (W0MU) (coded by K3CT)
Keystroke Additions: CTRL+HOME places cursor in the Callsign box and hi-lites the callsign for replacement. CTRL+ ALT+HOME places cursor in the Callsign box. Places the cursor at the last location or hi-lites a ? in the callsign. Pressing it again sends the cursor to the beginning of the callsign. (N4ZR) (coded by K3CT)
Contest: Removial of the ZeroLand QSO Party. Major changes to the IN7QPNE QSO party. Please test. (coded by K3CT)
Changed icon on uninstall shortcut and on CW IF.exe (Coded by N1MM)
Improved wording of Configurer menu selection in Entry Window (N4ZR) (Coded by N1MM)
QSO Parties - Fix erroneous graying-out of calls when the callsign is longer than the county abbreviation (e.g. W3DYA/PULA). (coded by N2IC)

Version 11.04.00 (Started April 1, 2011) -- Download
Changed program icon to new logo. (Coded by N1MM)
Gagarin Cup contest - list of special stations (multipliers) updated per new rules (coded by NA3M)
Rule Link: Changed the CQ WPX rules link. (KE4KMG) (coded by K3CT)
Contest Start/End Time: Changed the following contest start/end times: CQWWVHF, ARRLVhfJan, ARRLVhfJune, ARRLVhfSept, ARRLUhfAug. (NJ4F) (coded by K3CT)
Contest: Correct the off time for the BartgSpring contest. (NJ4F) (coded by K3CT)
Contest Start/End Time: Changed the following QSO Party contest start/end times: AL, AR, AZ, BC, CA, CO, CT, DE, FL, GA, HI, IA, ID, IL, IN, KS, KY, LA, MARAC, MCC, MD, MI, MN, MO, MS, MT, NC, ND, NE, NEWE, NH, NJ, NM, NV, NY, OH, OK, ON, PA, SC, SD, TN, TX, VA, VT, WA, WI, WV, 7QP. To test, open a contest, log a contact, click on View, Off Times. Check the day of the week, start/end times, and off time. (NJ4F) (coded by K3CT)
Voice Keyer: Improve the SSB function key parsing of the @, !, # voice macros. (coded by K3CT)
Bug: The SSB voice macro @ did not parse the frequency correctly when the Windows regional setting was EU. Users that voice frequency should make sure that a POINT.WAV file is recorded for use when the frequency does not end in ".0". Users that voice callsigns should make sure QUERY.WAV and STROKE.WAV are also stored in the letters directory. (RA3TT) (coded by K3CT)
Cabrillo 3.0: Add the missing ROOKIE Overlay Category. (K2DB) (coded by K3CT)
NY QSO Party: Change to Cabrillo 3.0 to support the recent category changes. (K2DB) (coded by K3CT)
TS-590: Added radio selection, support for the TS-590 radio codec and antenna select macros. (YO5PLD) (coded by K3CT)
TS-480: Added radio selection for the RIT change in this release. (coded by K3CT)
TS-480,TS-590,TS-2000: When tuning the radio with the arrow keys and RIT is on, step the frequency by the CW/SSB increment. (coded by N2IC)
Configurer: Remove the Win98 PC speaker option, organize selections in this window. (coded by K3CT)
IC-726: Added radio option. Use 9600 baud and 5 bit frequency data. (9A3OS) (coded by K3CT)

Version 11.03.04 (Started March 20, 2011) -- Download
Delay clearing the Available window button colors until 3 seconds after the QSO has been logged. (coded by N2IC)
11.03.03 was killing cw if.exe when 2nd entry window was opened. (K3CT) (Coded by N1MM)
RI1AN* added to the oblast.sec file (VE7CC) (coded by NA3M)
New parameter for User Defined Contests added - QsoNumbersByBand, Help.txt for UDC updated (EC7AKV) (coded by NA3M)

Version 11.03.03 (Started March 14, 2011) -- Download
Kill CW IF.exe on startup of program to prevent orphan processes from preventing startup of program. (many) (Coded by N1MM)
Corrections made to oblast.sec file to reflect recent changes to Russian callsigns (LY4K) (coded by NA3M)
Missing File: Add a check for a missing country file at program start. (K0RC) (coded by K3CT)
Bug: After logging a contest that was in Cabrillo 3.0 format, opening a database and contest in Cabrillo 2.0 format produced an error when OK was clicked. (coded by K3CT)

Version 11.03.02 (Started March 11, 2011) -- Download
FT-1000/D/MP/MK5: Added SO2V features for the FT-1000 model radios, see the Support Radios section of the manual for feature list. This corrects the FT-1000 issue "Reset RX to TX when QSO is Logged" issue. Many changes to the polling and all radio control routines. (coded by K3CT)
Added IC-7410: Added IC-7410 radio and support for the internal radio codec for SSB messages, digital, and QSO recording. Please test and report issues. (coded by K3CT)
Kenwood: Program code now sets/clears the internal IsRx flag, eliminate possible race/timing conditions. (coded by K3CT)
Entry Window Split Display: Format the frequency display of split to match the RX frequency. (coded by K3CT)
Available Window: On slower computers with limited resources, the focus does not return to Entry window after clicking on a spot. (coded by K3CT)
FT-80 RIT: Can not program or get RIT frequency, disable RIT on/off in code. (CO8CML) (coded by K3CT)
FT-450: Send a band select command to the radio prior to setting the frequency so the per band parmeters are not reset. (YO2NAA) (coded by K3CT)
MARAC QSO Party: Update to the new rules. (KA3QLF) (coded by K3CT)
FT-450/950/2000/5000/9000: Print a message in the Entrywindow status line and time out the radio interface if the radio sends incorrect CAT data. This will eliminate the intermittant cascading error messages reported for the FT-2000 and FT-450. (YO2NAA) (coded by K3CT)
NAQP Contests: Populate the default contest exchange from the user's station information. (Arnold) (coded by K3CT)
Audio Device Selection: Eliminate the status line message "Icom codec enabled" with a non-Icom codec radio caused by identical audio device driver names. (coded by K3CT)
SSB Playback: When the function key macro contains only the {LOG} macro, the QSY wipes callsign feature did not work after the first station was logged. (K0RC) (coded by K3CT)
SSB Playback: Eliminate the brief PTT action and PTT delay when no message was selected to play. (coded by K3CT)
Voice Recording: Added the ability to record Run and S&P wavefiles in seperate WAV filenames. If a S&P WAV file is not defined, the code uses the Run filename. Added the ability to stop a DVK recording by clicking on the Stop button in the Entry window. Change the label in Configurer, Files tab for the QSO Recording wave file path because the SSB voice recording function keys do not use this path. The SSB function key WAV file path can be truncated to omit the application path (wav file folder located in the program directory). A fully qualified path needs to be specified when the WAV files are stored elsewhere (not in the program folder). This string is recommended before every wav file name: wav\{OPERATOR}\ so each operator's files are stored in a seperate folder automatically. (coded by K3CT)
External DVK Devices: Users of LPT DVK or MK2R DVK should place EMPTY.WAV in the function key to execute the DVK message code. Program PTT or PTT Delay is not executed for these external DVK devices. The {LOG} and {FORCELOG} macros will now execute with external DVK devices. (coded by K3CT)
Cabrillo 3.0: Change the following ARRL contests to Cabrillo 3.0 format: DX, FD, 10m, SS, RTTY, 160m, VHF, UHF, RR, and IARU. (coded by K3CT)
MultiUser: Eliminate a Run-Time error that may appear during shutdown. (coded by K3CT)
Mobile Mode Bug: Rover mode was not enabled when Cabrillo 3.0 was enabled and Mobile was selected. (coded by K3CT)

Version 11.03.01 (Started March 10, 2011) -- Download
NRRLVINTER contest, only contacts with JO, JP, JQ, KQ, IQ and KP can be logged (LA6FJA) (coded by NA3M)
Bug fix - when importing Telnet Buttons from file any information after comma gets lost (UA3MIF) (coded by NA3M)
Correct default settings file error (Coded by N2AMG)

Version 11.03.00 (Started March 1, 2011)
Bug fix - NRRLVINTER contest, only 4 letter maingrids are MULTs, except own (LA6FJA) (coded by NA3M)
New contest CVA DX (Brazil) (PY1DX) (coded by NA3M)
New contest POPOV VHF (Russia) added as UDC contest (UA9CGA) (coded by NA3M)
Bug fix - Cabrillo ver. 3.0, ADDRESS-POSTALCode in the header was changed to ADDRESS-POSTALCODE (PY1DX) (Coded by NA3M)
CQ WW 160M contest - link to the contest rules updated (Coded by NA3M)
NRRLVINTER contest, only contacts with JO, JP, JQ, KQ and IQ can be logged (LA6FJA) (coded by NA3M)
Digital - Corrects issue with pressing pause while sending in Digital.(W1UE) (Coded by N2AMG)
Digital - Creates a new Digital Call Stacking menu in the Digital windows. (Coded by n2AMG)
Digital - Allows for Digital call Stacking to work First In First Out or Last In Last Out. (Coded by N2AMG)
New contest added - (R4W-CHAMP) R4W (Udmurtia, Russia) Open Championship (coded by UA4WLI)

Version 11.02.06 (Started February 24, 2011) -- Download
Corrects index out of bounds Run Time Error. (Coded by N2AMG)

Version 11.02.05 (Started February 18, 2011) -- Download
Available window: Fix runtime error/crash when selecting Turn Rotor (Coded by N1MM)
bug fix - CLARA contest, DX YL with 5 points does not give a mult2 (VE9MY) (coded by NA3M)
Digital - Corrects issue where if configured Now Key would highlight when using LOGTHENGRAB. (Coded by N2AMG)
Digital - Corrects issue where ESM Sequence would get out of align if using Now Key with no calls on Stack (Coded by N2AMG)
Adds Macro {CLRSTACK} to clear calls from call stack. (Coded by N2AMG)
Bug: CW speed indicator not shown at times with no radio interfaced. (WB9SBD) (coded by K3CT)
Cabrillo 3.0: Cabrillo 3.0 header text correction. (N8WAV) (coded by K3CT)
PACC Contest: Cabrillo output for MultiMulti and MultiOne or MultiTwo missing station/radio number. (IZ4UEZ) (coded by K3CT)
QSO Party: For multi classes, add station/radio number to the Cabrillo output. (coded by K3CT)
MS QSO Party: Change the MS QSO Party to default to the three letter county abbreviations used by other logging programs. The sponsor doesn't list official list of abbreviations on the MS QSO Party website. Users can also input the four letter abbreviations initially suggested by the sponsor. (N5NA) (coded by K3CT)
Modified newexe update script to check for CW IF running (coded by NA3M)

Version 11.02.04 (Started February 11, 2011) -- Download
Multi-user: added check for matching callsigns in all station databases (K3CT) (Coded by N1MM)
Prevent spot trimming if Telnet not open (K0RC) (Coded by K3CT)
FOC Contest: Scoring fix for G4FOC and callsign color during entry. (W4PM & N3RD) (coded by K3CT)
ND QSO Party: Rules changes, update. (K0RC) (coded by K3CT)
FL & MN QSO Party: DC is a multiplier for in-state users. (K0RC) (coded by K3CT)
MS QSO Party: Added new QSO Party. (PA3ARM) (coded by K3CT)
DC to MD Section Mapping: Prevent the program from changing DC to MD in contests where it isn't listed as a multiplier or expected by the program code. (AC0W) (coded by K3CT)
Cabrillo 3.0: In the Cabrillo output change the ARRL-SECTION field to LOCATION. (VE1DT) (coded by K3CT)
Cabrillo 3.0: Non-Assisted was misspelled. (VE1DT) (Coded by N1MM)

Version 11.02.03 (Started February 10, 2011) -- Download
New contests - due to RSGB 160M contest rule changes there are 2 new contests now (RSGB1ST160 and RSGB2ND160) (G4LMW) (coded by NA3M)
New contest - MMAA Contest (Manchester Mineira Contest - CWJFMM) is Now CQMM DX Contest(CQMMDX) (PY8AZT) (coded by NA3M)

Version 11.02.02 (Started February 5, 2011) -- Download
N1MMRotor: change EZ-Rotor position polling command to use "AI1;" instead of "AI1cr" to be compatible with ERC rotor control card.(AD6Z) (Coded by N1MM)
Change "Wrong Winkey Version" message to "Winkey not detected". Delay message 5 more seconds so that the message will come out on top of other windows. (Coded by N2IC)
LA QSO Party: LA QSO Party update to current rules. (K5ER) (coded by K3CT)
NC QSO Party: NC QSO Party rules changes. The bonus point rules made it necessary to change a routine used by all QSO Party bonus calculations. Watch for possible errors in other QSO parties. (W4DMB) (coded by K3CT)
XE RTTY: Rules URL change. (coded by K3CT)

Version 11.02.01 (Started February 2, 2011) -- Download
Bug: When radio control and COM port CW are combined on one COM port, can't stop CW messages when mode is CW-R. (several) (coded by NA3M & K3CT)
Available: clicking on spot was not reliably choosing that spot for selection (Coded by N1MM)
Available: show callsign in tooltip text to aid in usage & debugging (Coded by N1MM)
VT QSO Party: VT QSO Party rules change. (KK1L) (coded by K3CT)

Version 11.02.00 (Started January 25, 2011) -- Download
Fix error in total off time calculation. (W9ILY) (coded by K3CT)
Blacklisting a call in the Available window would remove all skimmer spots (Coded by N1MM)
Rescore contests would remove all skimmer spots (K1EP) (Coded by N1MM)
Corrects issue of Clicking in Available window and wrong spot being loaded. (Coded by N2AMG)
Available window was turning rotor to azimuth for the wrong spot (Coded by N1MM)
Bug: Fixed program errors when the radio mode was CW-R. (coded by K3CT)
Bug: Allow the "=" character to be used in a telnet command. (K9WMS) (coded by K3CT)
Defensive code to catch incorrectly generated Cabrillo category (coded by N2IC).

Version 11.01.04 (Started January 21, 2011) -- Download
Bug: QSO Party county file is reloading on every program start. (N1MM) (coded by K3CT)
Bug: Eliminate runtime error in the View Off Time code. (coded by N1MM & K3CT)
Info window: fix improper error handling of invalid control array error (Coded by K3CT)
Fix runtime error in GMTTimer (K4XKB) (Coded by N1MM)
Click on spot in available window was not always returning to EntryWindow when multi-user. (note to developers: removed doevents in sendall. Watch for side effects.) (Coded by K3CT & N1MM)
Available Window: Double clicking in the top portion of the window causes the focus to stay on the Available window. (N3RD) (coded by K3CT)
Don't allow "\" key in CW Window (K8UT) (Coded by N1MM)
Fix run-time error when SO2R and entering greater than 256 consecutive characters in the CW Window. (NY3A) (coded by N2IC)
Digital - Corrects issue of ALT-Click adding calls to Call Stack when DCS was Disabled. (Coded by N2AMG)
Digital - If DCS is enabled and in run mode stops Grab and Entry Window Store button from adding calls into the bandmap on your CQ Frequency. (Coded by N2AMG)
Digital - When clicking on a call in RX window it will remove that call from the Grab window. (Coded by N2AMG)
Digital - Adds safe guards in routines so Double calls do not enter call stack when DCS is enabled. (Coded by N2AMG)
Digital - Corrects issue with wrong call being highlighted in Grab window with 3 calls or less in Window. (Coded by N2AMG)
Digital - Corrects order of which LOGTHENPOP pulls calls from bandmap.No longer jumps calls now (LIFO). (Coded by N2AMG)
Digital - Corrects issue with not logging PSK63 in EPC WW Contest. (Coded by N2AMG)
Digital – Corrects Cabrillo Output for the BARTH RTTY Sprint. (Coded by N2AMG)

Version 11.01.03 (Started January 18, 2011) -- Download
TT Eagle radio support added (Coded by K3CT)
FT-80C radio fixes (Coded by K3CT)
Available: if spots arrive while deleting a spot, the wrong spot could be deleted (Coded by N1MM)
Info window: Performance improvement - don't update rate graph if not shown. (Coded by K3CT)
NAQP Contests: KH6 and HI stations are both logged with the exchange HI. Populate, score, and display multipliers correctly. (coded by K3CT)
Radio Control: Added the Ten Tec Eagle radio. Report any issues. (coded by K3CT)
Radio Control: Fix FT-80C polling and frequency display. Can also be used with the FT-747GX. W2LB reports that his FT-747GX will not transmit while the radio is sending data to the computer. This appears to be a radio firmware issue. (W2LB) (coded by K3CT)
After Export Log, open in Notepad to be consistant with Export Cabrillo sequence. (coded by K3CT)
Bug fix, multiplier and VE Province prefill did not work for VY0 because of the error in StatesAndProvinces.sec file (wrong ASCII code for slashed 0) (VE9MY) (coded by NA3M)
Improve the performance of calculation time off 12x (K3CT) (Coded by N1MM)
Added {OTRSP} macro for sending commands to an OTRSP device. (K1XM) (coded by N2IC)
Added new contest - Asiatic Russia Championship (ASRUCHAMP) (coded by NA3M)
Minor bug fixes for CLARA contest (VE9MY) (coded by NA3M)
HADX contest, addition of the sent serial number to the log window (VE3FH) (coded by NA3M)
Bug fix, LZDX contest, mult stations (new zone) color was incorrect in the band map(s) (UA3MIF) (coded by NA3M)
Improve Sweepstakes category validation before generating Cabrillo file. (coded by N2IC)
Improve Winkey initialization to reduce occurence of "wrong version" messages. (many) (coded by N2IC)

Version 11.01.02 (Started January 14, 2011) -- Download
Prevent erroneous buffer overrun messages from occurring. (RX4WA) (Coded by N1MM)
Removed "On Error Resume Next" from GMTTimer_timer. Watch for runtime errors (Coded by N1MM)
Correct telnet overrun threshold (N2IC) (Coded by N1MM)
Remove blank lines showing in Available window (backout of reduce flicker fix below) (Coded by N1MM)
Halt updating of bandmap while right-clicking options. Would operate on wrong spot if update occurred during the right click operation (Coded by N1MM)
Adds changes needed for {CTRLFx} to function When using MMTTY and MMVARI in DI2. and for MMVARI in DI1 (Coded by N2AMG)

Version 11.01.01 (Started January 13, 2011) -- Download
HA DX contest, for MM category serial numbers should be generated by band, link to the rules updated (PD3EM) (coded by NA3M)
Added user defined contest definitions for Jock White contest (Coded by NA3M)
Cleaned up code in EntryWindow ScheduleTimer. No functional changes (Coded by N1MM)
Corrects RT Error when selecting soundcard frequency over 24000hz in MMVARI setup. (Coded by N2AMG)
Corrects several small issues in Fldigi routines when using an alpha version of Fldigi. (Coded by N2AMG)
When usinf FSK in MMVARI locks transmit frequency to that of the align frequency set in Setup.Also disables Net button while in FSK (Coded by N2AMG)
Add new menu selection under FFT for MMVARI that preforms an align after clicking on a station in the waterfall. (Coded by N2AMG)
Corrects Digital setup not detecting any soundcards upon loading and then not completly loading all the variables used in the setup window. (Coded by N2AMG)
When using MMTTY adds AFC and HAM Default control buttons to the DI windows. (Coded by N2AMG)

Version 11.01.00 (Started January 12, 2011) -- Download
Fix paddle-sent CW initialization for Winkey 2.3 (N4ZR) (coded by N2IC)
bug fix - IOTA contest, logging was allowed without entering the exch #. (VE2FK) (coded by NA3M)
Bug: The two line WWV format information does not appear in the Information window. (K4AB) (coded by K3CT)

Version 10.12.12 (Started January 7, 2011) -- Download
Add non-sticky option to display duplicate skimmer spots (K1TTT) (Coded by N1MM)
Never bypass skimmer spots where spotter callsign is the same as station callsign (Coded by N1MM)
Reduce flicker in Available window mult list (Coded by N1MM)
Force spots to display at top of time-ordered mult list (add seconds to spot time) (Coded by N1MM)
Reduce spot table size based on CPU load and increase spot deletion to oldest 10% of time spots. Information messages appear in the Info window when spots are deleted for performance reasons. (coded by K3CT)
Improve utilization of available cpu resource when processing spots after sending CW via lpt/com or when cpu otherwise constrained. This improves maximum sustainable spot volume while sending and stabilizes max spot counts. (Coded by K3CT)
bug fix - RFC SSB/CW contest, all CIS and ES/LY/YL stations can work in this contest (UA9OL) (coded by NA3M)
new contest CLARA was added (VE9MY) (coded by NA3M)
unused contests "RFC CW" and "RFC SSB" removed automatically from database file (coded by NA3M)
UDC feature - added new parameter /CountMultOnlyFor/ and extention for /MultSqlString/ (MultSqlString = CallSign) (GW8IZR,UA3MIF) (coded by NA3M)
UDC feature - Help.txt file updated (coded by NA3M)
bug fix - RFC SSB/CW contest, error in Cabrillo fixed, Cabrillo V. 3.0 enabled for RFC contests (UA9OL, RA3TT) (coded by NA3M)

Version 10.12.10 (Started January 3, 2010) -- Download
Spot deletion code was deleting newest spots (Coded by N1MM)
Spot deletion code was removing self spots and CQ spots (N4ZR) (Coded by N1MM)
Spot deletion code was not updating available window and bandmaps (Coded by N1MM)
Change spot deletion code to remove oldest 10% of spots (10% of time, not count for performance reasons) (Coded by N1MM)
Info: Correct starting spot count in spot deletion message (Coded by N1MM)
Added flush of Telnet buffer when buffer size exceeds 100,000 bytes (N2IC) (Coded by N1MM)

Version 10.12.9 (Started January 3, 2010) -- Download
Avoid stack overflow errors when spots back up (Coded by N1MM)
Available: Restore s/n ratios missing from skimmers that return "DB" instead of "dB" (Coded by N1MM)
Allow spot processing while sending cw if sending with winkey (Coded by N2IC)
Allow spot processing while sending cw if cpu is hyperthreaded or has more than one core (Coded by N1MM)
Don't show duplicate spots in packet window nor send them to other stations in a multi-station network (Coded by K3CT)
Change spot governor invokation to start when spot queue > 0 for 10 seconds. (Coded by N1MM)
Change spot governor spot removal method to remove spots with timestamps within 30 seconds of the oldest spots. i.e. remove oldest 1/2 minute of spots (Coded by N1MM)
Available: add total spot count to title bar (Coded by N1MM)
NAQP: Initially populates HI in the exchange box when working a Dominican Republic station. (K9CT) (coded by K3CT)
Implement FocusOther and CTRLFx SO2R features for MMTTY (WW3S) (coded by N2IC)
Digital -Corrects issues with TNC not displaying correctly in Multi-RX windows (Coded by N2AMG)
Digital -Removes Spectrum color selector from Digital setup main tab. This was used for the old PSK .dll (Coded by N2AMG)
Digital -Corrects error when soundcard number stored in.ini is larger than current number of devieces (Coded by N2AMG)
Digital -Correctly selects correct MMVARI mode when typing RTTY in EW and mode specified for RTTY is a LSB mode (Coded by N2AMG)

Version 10.12.8 (Started December 31, 2010) -- Download
Stop overrun of telnet spots when using high volume source like RBN (Coded by N1MM)
Stop saving Skimmer spots in database. They will not show on reload (Coded by N1MM)
Do not reload all spots when changing packet filters. Filters will now be on a go forward basis only. Filters WILL be applied to all spots already loaded. (Coded by N1MM)
UDC feature bug - VHF/UHF contests, QSO with same Grid was 2 points (km) instead of 1 (EC7AKV) (coded by NA3M)
bug fix - SARTG NY RTTY contest, default Sent Exchange was incomplete (GU6EFB) (coded by NA3M)
SARTG NY RTTY contest, Export to File (Generic) added to comply with contest rules (W6WRT) (coded by NA3M)
Remove duplicate spots earlier, saving resource (Coded by K3CT)
When using {CTRLFx}, move entry focus to other window only when the callsign field is empty (NO3M) (Coded by N2IC)
Do not halt spot processing for winkey sending. Only native lpt/serial port keying. (Coded by N2IC)

Version 10.12.7 (Started December 30, 2010) -- Download
Delete skimmer spots > 20 min old from PacketSpot table before loading spots on startup (performance improvement) (N4ZR) (Coded by N1MM)
Remove code that was slowing load of spots while refreshing spots and sorting them (K3CT) (Coded by N1MM)
Improve startup with large packet spot table. (Coded by N2IC)
RAEM contest, time for the contest was corrected per new rules (UA9OA) (coded by NA3M)
New contest NRRL Winter (NRRLVINTER) added (LA6FJA) (coded by NA3M)
Available Window: optimize use of IsProperMode (Coded by N1MM)
Bug: Correct the multiplier logic for multi-mode contests that include digital and count multipliers per band and per mode. (coded by K3CT)
IN7QPNE QSO Party: Corrections for the logging of Zeroland QSO party. (coded by K3CT)
RunTime Error 52: When the stored "Recorded Wave File Path" drive letter doesn't exist, Error 52 is generated. (WA0MHJ) (coded by K3CT)
UDC feature improvement - contests using time periods will not lose multiplier count after restart (coded by NA3M)
UDC feature bug - VHF/UHF contests, QSO with same Grid was 2 points (km) instead of 1 (EC7AKV) (coded by NA3M)

Version 10.12.6 (Started December 22, 2010) -- Download
Peace Messenger Contest: Added new city codes (Coded by N1MM)
Available: Added S/N ratio from skimmer spots as a column (Coded by N1MM)
Fixed "Object variable not set" error when using ctrl-up arrow or ctrl-down arrow and there are not spots on the bandmap (coded by N2IC)
Packet: automatically remove skimmer spots more than 20 min old (Coded by N1MM)
Packet: removal of duplicate RBN spots was removing all dupes within packet timeout (N2IC) (Coded by N1MM)
PACC: Updated for changed rule Mixed Categories (work station twice) (Coded by PA1M)
PACC: Cabrillo updated to version 3 (Coded by PA1M)
Digital- Corrects Issues with DI2 not intializing correctly with a TNC. Also corrects a couple other TNC command issues. (Coded by N2AMG)
MMVARI- Removes limit for using only High Tones when using FSK with MMVARI. (Coded by N2AMG)
Digital- When clikcing Find all windows. Fldigi and MMTTY windows are now moved to within the 800x600 limit. (Coded by N2AMG)
FL QSO Party: Change in the VE multipliers. (WD4AHZ) (coded by K3CT)
NH QSO Party: New QSO party. (N1IX) (coded by K3CT)
ARRL Rookie Roundup: Bug fixes for KH6/KL7 operators, call history, populating exchange from logged contact, parsing of exchange, frame exchange text, entry error reporting, quick edit, and logging. Please test and report any remaining issues. (coded by NA3M & K3CT)
ZeroLand QSO Party: Added ZQP QSO party. It's the same weekend as 7QP, IN, and NEQP QSO parties. For stations outside of the 7QP, IN, NEQP, and ZQP states, use the IN7QPNE QSO party selection. There were a lot of late changes to this QSO party code, please test and report any issues. (W0IW) (coded by K3CT)
IN7QPNE QSO Party: Added the ability to log ZQP contacts for users that are out-of-state in 7QP, IN, NEQP, and ZQP. Changed multipliers to "per band and per mode" for ZQP. Note that the other QSO parties do not count multipliers with this frequency. Users can send the Cabrillo output to all four sponsors. Each sponsor will rescore the log to their rules. There were a lot of late changes to this QSO party code, please test and report any issues. (coded by K3CT)
Call History: Delete the cached call history callsign data when a new call history file is imported. (coded by K3CT)
Call History: Eliminate the confusion caused by contests that update the call history database from log into the State or Section field and then expected the data to be in the opposite field when operating the contest. The users may notice some contest differences as a result of this change. Please test and report any contests that do not use the proper field. (coded by K3CT)
Contest Selection Window: For QSO Party, when the Import Section List button is clicked, prompt the user to import both files used by QSO party contests (recommended). (coded by K3CT)

Version 10.12.5 (Started December 20, 2010) -- Download
Packet: do not let goveror remove self spots, including CQ Frequency. (Coded by N1MM)
Packet: make sure governor leaves at least 100 spots (Coded by N1MM)
Packet: changed spot loading messge to: n spots. m spots loaded after filtering. (Coded by N1MM)
Packet: changed governor to remove 20spots at a time. (Coded by N1MM)

Version 10.12.4 (Started December 15, 2010) -- Download
When using {CTRLFx}, move entry window focus before sending the message (W4NZ) (coded by N2IC).
ARRL RR: fix esm/space pressed bug that wipes the exchange field except for state (many) (Coded by N1MM)
Packet: added a governor that limits how much time the program will spend managing packet spots. (Coded by N1MM)

Version 10.12.3 (Started December 13, 2010) -- Download
BC QSO Party: Update to the new rules. Changed multipliers per band & mode, bonus point value, and added state mults. (VE7FO) (coded by K3CT)
- bug fix - ARRL10M, for Mexican station serial # should not show up in the Entry Window, Cabrillo file in SentExchange field has serial # instead of Province abbreviation (XE1GRR) (coded by NA3M)
- bug fix - ARRL10M, VER(Veracruz) is logged as VT (N2IC) (coded by NA3M)
- bug fix - ARRL10M, HI and AK were not listed in the Multipliers window (K3IU) (coded by NA3M)
- bug fix – ARRLRTTY, TARARTTY, K and VE were listed in the Multipliers/Country window (coded by NA3M)
Correct bugs with bandmap spots displaying badly after self spotting an already spotted station. (many) (Coded by N1MM)
Real Time Reporting: If auto update time is less than 1 minute, force to 5 minutes (K1TTT)
Real Time Reporting: Change update time combo box to a list box so users can't type in bad times (K1TTT)
bug fix - OKDXRTTY contest, band change rule (5 minutes) was not working for SINGLE-OP category (N2QT) (coded by NA3M)

Version 10.12.2 (Started December 6, 2010)
Force import of StatesAndProvinces.sec file. (Coded by K3CT)
ARRL10M: Eliminate country mults for XE, KL & KH6 from mult window (Coded by N1MM)
Improve visibility of Generate Cabrillo to prevent newbies from generating the wrong file (W5OV) (Coded by N1MM)
Replace backleveled version of MMVARI.OCX (N2AMG) (Coded by N1MM)

Version 10.12.0 (Started November 21, 2010)
Filter duplicate spots early if less than 2 min apart and if less than 200 hz apart (especially for RBN) (Coded by N1MM)
Speeded up removal of more than two spots on same frequency. (N1MM)
Speeded up add of packet spot to spot collection by releasing control less frequently (N1MM)
Speeded up add of packet spot by truncating loop when band of spot is passed. (N1MM)
Added count of calls reloaded at startup. (N1MM)
Speeded up blacklist call by only immediately deleting the spot from which the call was right-clicked. Did not change blacklist spotter, since one would want that to find all stations spotted by that spotter. (N3AD) (Coded by N1MM)
Available Window: Right double clicking on the spots produces an error. Double clicking is un-necessary and produces the same result as a single click. (K1TTT) (coded by K3CT)
SO1V: When a contact is logged with VFOB selected, the VFOA frequency is logged with the contact. Receiving with VFOB is undefined for SO1V but code was added to correct for this case. Using VFOB for receiving in SO1V is not a supported feature. (coded by K3CT)
Radio Control: Correct the Kenwood ALT+F10 swap VFO frequencies command. Minor changes to the Icom timing. (coded by K3CT)
Corrects TNC output to the Digital Multi-RX Windows (Coded by N2AMG)
Change annoying 'was expecting connection' message box into an info window red message. (Coded by K1TTT)
Improved handling of Winkey initialization to reduce occurrence of bogus "Wrong Winkey Version" message (coded by N2IC)

Version 10.11.2 (Started November 14, 2010) -- Download
Update splash & about windows with new logo (Coded by N1MM)
Available Window: When clicking on the Available window spots, the focus intermittently does not return to the Entry window. (N3RD) (coded by K3CT)
Callsign rules updated for new PJ country allocations (Coded by K1TTT)
bug fix - EPC PSK63 QP, 5 digit EPC-numbers in Sent Exchange were cut to 4 digit number in Cabrillo file (IT9VDQ) (coded by NA3M)
enhancement - UDC feature, file Help.txt updated. (Tnx PY1NB, EB2RA for translations)
enhancement - UDC feature, changes in /DupeSqlString/ parameter - see new description in Help.txt file. (coded by NA3M)
bug fix - OKOMDX contest, section data upgrade code was broken causing problems for those who never used this contest before with current database file (OH2BO, VE3IAE) (coded by NA3M)
Digital - Corrects the way QTC Group information is parsed when clicked on.(Coded by N2AMG)
When clicking in QTC Group Header Box the program will expect you to either type
the group number (4/10, 12/10, ect.) or will paste the group number if previously copied (Coded by N2AMG)
Digital - If QTC frame is open halts focus switching to Entry Window (Coded by N2AMG)
WAERTTY - Corrects not being able to log 000 for an exchange. (Coded by N2AMG)
Digital - Corrects some minor form resize issues if the QTC frame was open. (Coded by N2AMG)
Fixed "Object variable not set" error when using ctrl-up arrow or ctrl-down arrow and there are not spots on the bandmap (coded by N2IC)

Version 10.11.1 (Started November 11, 2010) -- Download
ARRL 10M: include correct section file and force reload (build error)

Version 10.11.0 (Started November 1, 2010) -- Download
Add set focus to entry window that was missing in Available window mouseclick (K3CT) (Coded by N1MM)
NAC: multiplier 23 cm was wrong in REG1TEST export (SM7GVF) (coded PA1M)
Removes old code that was causing wrong interface to be brought up when switching from PSK to RTTY (Coded by N2AMG)
Corrects Error message when editing QPSK Contacts in Edit Window. (Coded by N2AMG)
Re works Configuration string used to Load Fldigi to work with latest version of Fldigi. (Coded by N2AMG)
Corrects issue with MMVARI engine of not selecting correct macro set in RTTY mode (Coded by N2AMG)
New contest added - KVP, ZRS Championship (Slovenia) (S57AD) (Coded by NA3M)
New contest added - DRUZHBA, Youth competition "Friendship" (Russia) (RZ3FQ) (Coded by NA3M)
New contest added - DARC10MDIG, DARC 10 m DIGITAL Contest (Corona) (VE3FH) (Coded by NA3M)
ARRL10M contest updated, XE provinces were added (CX6VM) (Coded by NA3M)
New parameters added to UDC feature (CabrilloVersion, BonusPoints2, DoNotCountMeAsMult), see updated Help.txt (Coded by NA3M)
bug fix - multipliers for DE QSO Party should be counted by band and mode (WD3C) (Coded by NA3M)
bug fix - WAG contest, exchange from CallHistory file was used for prefill regardless of corrected exchange in earlier logged contact (DL6KVA) (Coded by NA3M)
Fix Canadian provinces erroneously appearing red in the bandmap when they have already been worked. (Coded by N2IC)
ARRL SS and RR: Eliminate the "0 0" exchange that may appear when double clicking on a self-spot or pressing space bar with a spot-call on the call frame. (several) (coded by K3CT)
ARRL SS and RR: Add support for the "Clear populated exchange on callsign change" option in Configurer. All contests are now supported. (coded by K3CT)
ARRL SS and RR: Call History Export: Do not export the Exchange1 field. It contains unuseable information that may confuse users. (K3CT)
ARRL SS: Use definite NRs in preference to two-digit NRs when interpreting exchange. e.g. 12B 61 CT 32 will be interpreted as 12B 32 CT not 61B 32 CT (Coded by N1MM)

Version 10.10.2 (Started October 23, 2010) -- Download
FOC BW QSO Party: Added RST in Entrywindow, fixed the rules link, change log output to include RST. (W3YY) (coded by K3CT)
Bug ARRL SS: Using ESM and S&P and on a station spotted in the Bandmap, users receive an "invalid section message" when trying to log the contact. There is no error if you type the call, if the callsign was in call history, or if you tab between the callsign and exchange field again. (AC0DS) (coded by K3CT)

Version 10.10.1 (Started October 12, 2010) -- Download
Stopped calling IsWorkable every radio interrupt (efficiency change) (K3CT) (Coded by N1MM)
New contest added - SYLRA (Scandinavian Young Ladies Radio Amateurs) (OH6LBW) (Coded by NA3M)
MCC QSO Party: Special point callsigns and new CY0 & CY9 rules changes. (VE1NB) (coded by K3CT)
QSO Party: Self-spotted spots containing exchange information were not colored correctly when placed into the Bandmap. (K2DSL) (coded by K3CT)
QSO Party: When entered in the Entry window callsigns containing a "/" and logged prior should display as a DUPE until the exchange is entered. (W7GKF) (coded by K3CT)
QSO Party: Self spotting prior logged callsigns containing a "/" with exchange information were incorrectly colored gray in the Bandmap even when the exchange is in a new county. (K0RC) (coded by K3CT)
QSO Party: For out of state users in the BC & ON QSO parties, US callsigns should be gray when entered in the Entry window. For out of state users in the AK QSO parties, only KL7 callsigns should be valid. For out of state users in all other QSO parties, VE callsigns should be gray when entered in the Entry window. (coded by K3CT)
DUPE Message Display: Adjust the location of the DUPE display when the Entry window contains additional fields. (several) (coded by K3CT)
Call History Import: Do not populate the LOC1 and LOC2 call history fields if the input data is not a valid grid square. Add input directive !!FOURCHARGRIDSQ!! which truncates the input data to four characters. (coded by K3CT)
Icom Radio Control: Slow down the radio polling and increase the time between commands because some CatMacro sequences are not repeatable. (K8UT) (coded by K3CT)
QSO Party: Do not color spotted callsigns ending with "/R" gray. (coded by K3CT)
Corrects Mode not changing correctly in PSK Engines when using Multi-RX Browser (Coded by N2AMG)
Corrects RT13 error if text was typed into speed change selection box. (Coded by N2AMG)
Corrects TX Frequency in the PSK engines not updating correctly when the RX frequency changes and NET is on. (Coded by N2AMG)
Corrects RT13 error when pressing Cancel when setting Multi-RX AFC Width and Sense. (Coded by N2AMG)
Corrects issues of Multi-RX not using the Lower Spectrum boundry Frequency and alwways using 250hz (Coded by N2AMG)
Changes action of Multi-RX AFC Scanning. No Longer jumps back to center frequency when it hits upper or lower boundry (Coded by N2AMG)
Corrects MMVARI not intializing correctly after switching to CW or SSB and then returning to a digital mode. The MMVARI Engine
now closes to reintialize the FSK settings when switching to CW or SSB (Coded by N2AMG)
FOC BW QSO Party: Added a new contest option. Place the call history member number in the Exch1 field. Tnx W4BFQ for testing. (coded by K3CT)
Available Window: Small efficiency change. (coded by K3CT)

Version 10.10.0 (Started October 2, 2010) -- Download
Show additional information in 'Why don't I see any spots?' window. (Coded by N1MM)
CA QSO Party: changed time off minimum to 15 minutes (was 30) (W4BQF) (Coded by N1MM)
Enhansment: EPC RU DX contest (EPCRUDX), One click in DI on serial and Grid combined together will place both serial # and the Grid in proper fields of Entry Window. (Coded by NA3M)
bug fix: EPC RU DX contest (EPCRUDX), Mode in Cabrillo file was PK, should be PM (for BPSK63). (RA3TT) (Coded by NA3M)
bug fix: RSGB2128 (and possibly other RSGB contests), Lookup table in database was not updated with the latest rsgb.sec file. (M0CHK) (Coded by NA3M)
bug fix: TARA PSK Rumble, errors in BARTG.sec file, incorrect multiplier identification (K2DSL) (Coded by NA3M)
bug fix: Oceania contest. For M/M and M/2 serials increment across all bands, should be per band (ZL2iFB) (Coded by NA3M)
Corrects RT Error 380 when Loading PSK Engine on some systems (Coded by N2AMG)
Corrects issues of MMVARI Browser window not coming to the foreground when DI window was brought to foreground (Coded by N2AMG)
Corrects Not saving the correct mode index in MMVARI Window when closing down (Coded by N2AMG)
If using Windows 7 Run N1MM as an administrator at least once to register the correct ocx's (Coded by N2AMG)
New contest added - CQSA SSB. Note: Cabrillo ver. 3.0 is used for this contest, pay attention to contest setup fields. (EA8CDI) (Coded by NA3M)

Version 10.9.7 (Started Septmber 26, 2010) -- Download
Enhancement: ARRL UHF contest added (K3TUF) (coded by NA3M)
Corrects PSK Engines not setting on top correctly (Coded by N2AMG)
In PSK Engines saves last speed used and reloads that speed when loading (Coded by N2AMG)
In PSK Engines changes Speed control to dropdown selection instead of button click (Coded by N2AMG)
Re-writes Multi-Channel RX Implementation to use expanded new features of MMVARI.ocx (Coded by N2AMG)
Enables ALT-Click ability in RX windows for stacking callsigns (Coded by N2AMG)
Corrects Clear Grab window on CQ from not funtioning in PSK Engines (Coded by N2AMG)
Corrects RT13 Error when trying to open Soundcard mixer control while using MMVARI as an engine (Coded by N2AMG)
Removes Soundcard Mixer menu from digital windows when using Vista, Windows7, and the Fldigi Interface (Coded by N2AMG)
Digital- When using Hover mode removes selected callsign from Grab window after call has been locked into the entry window (Coded by N2AMG)
Digital- When using the Search in Garbage Callsign validity rouitnes whole calls that are inthe open are now clickable (Coded by N2AMG)
QSO Party: Modify the QSO Party name to include the state for the scores reporting application and Cabrillo output. (K1TTT) (coded by K3CT)
EntryWindow Bug: Prevent the digital mode strings from appearing in the Bandmap when they are used to change modes. (coded by K3CT)
bug fix: Makrothen RTTY contest (MAKRORTTY), call history should only pre-fill a 4-character grid square (K1MK) (Coded by NA3M)
Enhancement: EPC RU DX contest (EPCRUDX, BPSK63) added (RA0AM) (coded by NA3M)
bug fix: EPCRUDX contest, Cabrillo file has PK instead of PM mode for BPSK63, Oblast should not be in the Cabrillo log file (RA3TT) (coded by NA3M)

Version 10.9.6 (Started Septmber 22, 2010) -- Download
Update CallHistory From Log: Populate the CallHistory State field under certain conditions. (K1MK) (coded by K3CT)
Multiplier Window: If the contest has multipliers "once per mode" or "once per contest", do not display HF bands with any dropdown selector option. (coded by K3CT)
Bandmap Window: Selecting Blacklist Callsign or Spotter produces a runtime error. (VE1DT) (coded by K3CT)
PA QSO Party: Bonus station callsign change. (WC3O) (coded by K3CT)
- CQWW RTTY contest: added Run/Mult column for generic file format (UA9CGA) (coded by NA3M)
- bug fix: RFC DIGI contest, when exporting Cabrillo to file BPSK63 mode was PK, should be PM (RA6YDX) (coded by NA3M)
- CQWW RTTY contest: added Run/Mult column for generic file format (UA9CGA) (coded by NA3M)
MCC QSO Party: New QSO party. (VE1NB) (coded by K3CT)
Entry Window: When RTTY or PSK is entered in the Entry window, the string appears in the Bandmap. (coded by K3CT)
Available Window: When a single row of band buttons is displayed, clicking on a band button may not set the radio mode correctly when the contest mode is RTTY or PSK. (coded by K3CT)

Version 10.9.5 (Started Septmber 16, 2010) -- Download
WAE - change made to prevent improper information from being sent in a QTC. (LU2NI) (coded by N2IC)
Entry Window: Change the position of the WAE QTC label. (coded by K3CT)
CW Ops Contest: Populate KH6 & KL7 non-members with the state exchange instead of the country prefix. (coded by K3CT)
CISDX RTTY contest: updated CISDX.sec file, Georgia (4L) removed from CIS countries list, contest Display name changed to "CISDX QPSK63" (Coded by NA3M)
- Enhancement: added new contest BARTG SPRINT75 (BAR75RTTYS) (K8UT) (Coded by NA3M)
New version of MMVARI.ocx file (Coded by JA7UDE)
Adds FSK Keying to MMVARI. (See message in Groups for explanation)
Adds QPSK Mode to MMVARI.
Adds New Demodulator to MMVARI in RTTY Mode (FFT)
Many changes to PSK Engines to support new .ocx file (Coded by N2AMG)
Changes to Digital tab of main Config area to allow for selectig FSK Keying in MMVARI (Coded by N2AMG)
LZ Open & ROPOCO Contests: Logging error when editing a previous QSO with ESM enabled. (DK8NT) (coded by K3CT)

Version 10.9.3 (Started Septmber 8, 2010) -- Download
bug fix: ARRL Rookie Roundup contest, "/ROK" in the callsign is not required to identify rookie station, check is used instead (W4ATX) (coded by NA3M)
Enhancement: contest Display Name added as a tool-tip (hover) on Log Type combo box when selecting new contest (coded by NA3M)
bug fix: UDC contest, for the contests using numerical sections (*.sec file) every QSO was causing error message (JA2FSM) (coded by NA3M)
bug fix: UDC contest, PointsPerContact and BonusPoints parameters were giving 0 points for every QSO regardless of their settings (JA1XMS) (coded by NA3M)
Performance improvements for multi-computer network start-up. (coded by N2IC)
PA QSO Party: Changed the bonus station callsign. (coded by K3CT)
Database: Prevent the storage of radio frequencies for non-contest modes. Remove unwanted mode entries from the database table. (coded by K3CT)
Multiplier Window: Eliminate a display error when the users database is corrupt and Section view is selected. (coded by K3CT)
Function Key Export: Add prompt if function key export file exists. (coded by K3CT)
Function Key Macro Window: Enable Export/Import in the File menu. (coded by K3CT)
Entry Window: Add a Tools menu selection to clear call history then update call history from log. (coded by K3CT)
CW Ops Contest: Populate KH6 & KL7 state exchange if not in call history or log. Eliminate searching the call history Sect field for member number. (coded by K3CT)
Spot Display: Improve "Why don't I see spots" message. Add a warning message if filter on Mode is selected and the digital sub-band frequency table is not populated on all HF contest bands. (coded by K3CT)
CQWW RTTY contest: Changes to generic file format for manual multipliers checking (UA9CGA) (coded by NA3M)
CQWW RTTY contest: Updated link to the contest rules (coded by NA3M)
In multi-computer networks, when ESM is not being used, allow contacts to be logged even when other stations are transmitting on the same band. (KD4D) (coded by N2IC)

Version 10.9.3 (Started Septmber 15, 2010) -- Download
Entry Window: Change the position of the WAE QTC label. (coded by K3CT)
CW Ops Contest: Populate KH6 & KL7 non-members with the state exchange instead of the country prefix. (coded by K3CT)

Version 10.9.2 (Started Septmber 3, 2010) -- Download
SPRINTNS Bug: Can not log contacts. HI not counted as mult. (W4NZ) (coded by K3CT)
Available: fixed runtime error in blacklist code (N3RD) (Coded by N1MM)
Multi-User/Rotor fix error in handling of rotor messages (Coded by N1MM)
Region 1 Field Day - Added support for SV, SV5, SV9. (SV2KBS) (coded by N2IC)

Version 10.9.1 (Started Septmber 1, 2010) -- Download
CO QSO Party Bug: Cabrillo 3.0 name changes prevented Rover mode from functioning. With Cabrillo 3.0 menus, Rover mode is enabled when Station Category = ROVER or MOBILE. CO QSO Party Rovers, Mobiles, and Multi-Op stations should use this release or newer. (W0IVJ) (coded by K3CT)
New Contest Dialog: When changing between contests that support Cabrillo 3.0 / 2.0, the version 2.0 dropdown lists were not updated. (coded by K3CT)
Enhancement: Added status line text when UHF frequency/band change must be ignored to prevent overflow (radio connected, non-transverter use). (coded by K3CT)
Call History Export: Change export comment to make it clear that the LastUpdateNote field is optional. (N4ZR) (coded by K3CT)
Internal changes to support the future ARRL UHF contest addition. (coded by K3CT & NA3M)

Version 10.9.0 (Started August 31, 2010) -- Download
Don't interpret cut numbers in received serial number unless in CW mode (W7ZR) (Coded by N1MM)
Multi-computer changes: The warning message for multi-computer connection that was added in 10.8.5 has been removed. In its place are the following changes: 1) Initially, when a computer is unable to reach another computer in the N1MM Logger network, polling for the unreachable computer will continue for 3 minutes. The connection "ball" in the Info Window will turn Red. Polling for an unreachable computer can have a performance impact on users - possible hangs and CW stutter. 2) After 3 minutes, the polling will be automatically suspended, and the connection "ball" will turn Blue. Since polling has been suspended, there will be no performance impact on users 3) When the unreachable computer comes back on-line, the computers will automatically reconnect, and the connection "ball" will turn Green. While it may not be obvious, this is a significant improvement from previous releases. In previous releases, the polling, and it's resultant performance impact, continued indefinitely until the networked computer came back on-line. (coded by N2IC)
Added blacklisting capability for spots & spotters (N3RD) (Coded by N1MM)
bug fix: RDAC and SCC RTTY, when importing ADIF file exchange information gets lost in Cabrillo file (RA6YDX) (coded by NA3M)
Enhancement: TRC DX contest added (LZ1YE) (coded by NA3M)
Enhancement: NS Sprint CW contest added (N4ZR) (coded by NA3M)
Enhancement: RFC DIGI (Russian Federation Digital) contest added RA6YDX) (coded by NA3M)
Enhancement: minor bug fixes for UDC, QsoErrorString parameter changes (see Help.txt) (JA1XMS) (Coded by NA3M)
Enhancement: Time from last QSO and last band change is available now for both Entry Windows, move cursor to DXLOGFrame (RZ3FQ, UA3MIF) (Coded by NA3M)

Version 10.8.5 (Started August 31, 2010) -- Download
CWOps: Fix scoring, allow the use call history files with member number in the Sect field or the Exch1 field (new export format), improve validation prior to logging, populate exchange for VE and DX calls that are not in call history. (coded by K3CT)
Enhancement: For populated exchanges from log, call history, and telnet spots (not self-spots), if the callsign changes clear the exchange text. Add an option on Configurer, Other tab to enable/disable this feature. Not supported in the ARRL SS style contests. (coded by K3CT)
Call History Import: If Sect field is not a valid ARRL section, do not populate a blank State field. Add Call History input file directive !!MapStateToSect!! which copies the State field into a blank Sect field if the State only has one section. (coded by K3CT)

Version 10.8.4 (Started August 22, 2010) -- Download
Display a message box if program cannot connect to another computer in a multi-computer network. The message box suggests that automatic reconnect attempts be disabled until the problem is corrected. The message box will appear only once. (coded by N2IC)
Corrects MMTTY window from opening when sending from second radio in WAE CW (Coded by N2AMG)
Digital - New Macro substitution "^" will now allow the "!" to be sent.. (Coded by N2AMG)
Digital Corrects displayed frequency in waterfalls and jumping of frequency when clicking in waterfall when using No radio (Coded by N2AMG)
Digital Corrects not loading AUTOTRXUpdate settings (Coded by N2AMG)
Digital add "^" macro substitution to send "!" in digital modes (Coded by N2AMG)
Correct scoring for SARTG RTTY Contest. (Coded by N2AMG)
Bug 586 - Characters truncated when using CW Window and Winkey on a high latency connection. (KH6MB) (coded by N2IC)
Bug SCCRTTY: Can't log year 1982, program error when working the same station on another band. (W6WRT, G8UBJ) (coded by K3CT)
Bug SCCRTTY: Bug SCCRTTY: Invalid Entry error when trying to log some QSO's. (K1TTT) (coded by K3CT)
Fixed dueling CQ's prematurely stopping. (K2KW) (coded by N2IC)

Version 10.8.3 (Experimental) (Started August 21, 2010) -- Download
Call History Enhancement: Added provision on Associated Files tab for designating contest specific call history files that are imported into the active database when the contest is opened. When loading large files, expect file import delays. (N4ZR) (coded by K3CT & N1MM)
Call History Enhancement: Add call history database support for contests that use the Exchange and Misc text box. Please report specific contests that need to be modified. (N4ZR) (coded by K3CT & N1MM)
Call History Enhancement: Add note field to call history file to track the history of each line since the last import. The LastUpdateNote field is ignored on file import. (coded by K3CT)
Call History Export: Add prompt before overwriting an existing file. The field names are now exported at the top of the file. Lines that begin with "#" are ignored during file import. (coded by K3CT)
Call History Import: Add a check and prompt for a missing file. Validate the CK field as a number and BirthDate as a date. If either are incorrect, the default field is stored. If any field is missing from the file on import, a default value is stored. (coded by K3CT)
Call History Enhancement: Add the capability to import call history files with columns in any order, omit columns, files with minimum columns (only the necessary fields), and files with mixed column data. When a callsign is repeated in the file, update the field(s) that are different (do not replace the entire entry). (coded by K3CT)
Call History QSO Party: For in-state users if the exchange box is blank after checking the log and Exchange1 call history fields, use the call history state or section field to populate out of state entries. (N4ZR) (coded by K3CT)
Call History Display Text: Modify the Entrywindow display line for contests that don't exchange grid squares so that the Bearing text line is less likely to extend beyond one line. Make these changes: move to the left, place bearing first, and remove grid square. If Sect, State, Exchange1 fields are duplicate, display only once. (N4ZR) (coded by K3CT)
Database Change: Correct the call history field sizes for Name, Sect, and State to match the GUI and logging table. Add three new CallHist fields: Exchange1, MiscText, and LastUpdateNote. Add new database table to support the loading of call history files per contest. (coded by K3CT)
Macro Addition: Added {CHNAME} which is populated with the name from the call history file. Call history does not need to be enabled. (W6SX) (coded by K3CT)
CO QSO Party: Update the VE section list and enable the Cabrillo 3.0 code added early by N1MM. (N5NA) (coded by K3CT)
ARRLDX Contests: Changed to use the State call history field. (N4ZR) (coded by K3CT)
Contest Rules: ARRL rules, WAE, WAG rules links updated. (N4ZR) (coded by K3CT)
RAC Contest: Do not populate the Exchange box with a serial number from a previous contact. (VE3KI) (coded by K3CT)
IARU & WRTC Call History: Fixed a call history Entry window populating bug. (coded by N2IC)
Telnet Comment Field: Do not extract the grid square from the telnet/packet comment field. Non-standard spots cause repeated user confusion with beam heading. (coded by K3CT)
CWOps Contest Bug: Can not log Callsigns greater than eight letters. Eliminate bug and allow countries with single letters to be logged. Other changes currently in testing. (W1RM) (coded by K3CT)
Bug Fix: With no radio configured in SO2V mode, pressing back-slash results in runtime error. (coded by K3CT)
RDAC Contest: Contest now uses the new call history Exch1 field for log update, import, and export. (coded by NA3M & K3CT)
Available Window: Sort frequencies numerically. (KA1IOR) (Coded by N1MM)
Bug Fix: Prevent Run-time error 383 when opening Log Dialog window. (coded by K3CT)

Version 10.8.2 (Experimental) (Started August 12, 2010) -- Download
Rotor-EZ: Handle position reporting (K1KP) (Coded by N1MM)
Changes below are fixed in conjunction with new Fldigi version 3.20.22 Update (http://www.w1hkj.com/downloads/fldigi-3.20.23_setup.exe) (Coded by N2AMG)
Fldigi - Corrects issue of text entered in TX window now displaying correctly in RX window. (coded by N2AMG)
Fldigi - Corrects issue of transmitted text not showing up till after transmission was complete. (Coded by N2AMG)
Fldigi - Corrects issues where backspace was not functioning correctly in PSK and other modes. (Coded by N2AMG)
Fldigi - Corrects issue of previously manual sent text was showing up when sending from macro. (Coded by N2AMG)
Fldigi - Corrects Caption of DI not displaying correctly when using the Display radio Freq in caption. (Coded by N2AMG)
Corrects the wrong help file page from opening up when clicking help on the DI's (Coded by N2AMG)
Correct error in displaying Run1/Run2 (N3RD) (Coded by N1MM)
RDAC bug fix: multiplier coloring in the band map was not correct (R8TX) (Coded by NA3M)

bug fix: Call History Lookup feature did not work with /p in the callsign (DL6KVA) (Coded by NA3M)

Correction made to RDAC.sec file to reflect recent changes (DL6KVA)(Coded by NA3M)

When changing Contests if not a digital contest set ditial mode numbers to 0 (Coded by N2AMG)
When sending to a station there was no QTC's to send stop opening up MMTTY Window. (Coded by N2AMG)

Version 10.8.1 (Experimental) (Started August 4, 2010) -- Download
Enhancement: minor bug fixes for UDC, added Multiplier1,2,3 to Generic file (see Help.txt) (G4OGB) (Coded by NA3M)
Enhancement: Help section in Portuguese was added to UDC help file (PY1ME) (Coded by NA3M)
Rotor Program: Fix for DCU1 protocol (WB2RHM) (Coded by N1MM)
The last dupe row values from the log window were being returned as the prior logged value when filling in entry window fields from the log. This causes problems with rovers who are changing county or grid. One wants the latest value, because you may have moved them to a new band. Changed to latest value. (K3TUF) (Coded by N1MM)
WAE: don't allow blank received serial number to be logged as zero. (N4ZR) (Coded by N1MM)
WAE: position QTC mode label so it is visible (N4ZR) (Coded by N1MM)

Version 10.8.0 (Experimental) (Started July 24, 2010) -- Download
IARU - Populate correct zone for VE3 when Call History is enabled.
Bug 595 - With Winkey, could not edit call while exchange was being sent. (K0MPH) (coded by N2IC).
Venezuela Independence Day Contest - Change to allow stations to be worked on each band and mode. (YV1DIG) (coded by N2IC).
Moves auto TRX Update settings to main dropdown settings menu in DI's (Coded by N2AMG)
Adds setting to Digital setup menu to have the frequency in then caption on the DI's
follow the radio instead of the Exact that gets calculated. This works on the {RDIGFQ} and {LDIGFQ} Macro's (Coded by N2AMG)
Available Window Enhancement: Add mode filter options for telnet spots. Right click in the Available window to display menu. (G0VGS) (coded by K3CT)
Available Window Bug: Fixed a button color display error that existed in the code for many years. Impacted a small number of contests. (coded by K3CT)
ADIF Export: Don't prompt for contest rescore. (VE3KI) (coded by K3CT)
Contest Selection Window: Changed the width of several selectors to accommodate the text. (coded by K3CT)
Multiplier Window: In Section view, suppress all sections without display label. For RDAC contest, display only worked RDA in Section view. (NA3M) (coded by K3CT)
Bug: When multiple calls were spotted on the same frequency, the wrong call could be placed in the Entry window when clicking in the Bandmap or Available window. When using the keystrokes to navigate the Bandmap, similar issues existed. Reduce the time it takes to find a callsign in the spot table. (N4ZR) (coded by K3CT)

Version 10.7.2 (Experimental) (Started July 17, 2010) -- Download
Available Window: Improvements in displaying menu options. (coded by K3CT)
Bug Multiplier Window: For the IOTA contest, the Multiplier window doesn't display countries correctly when contest mode category is Mixed and contact was made on CW. Note that the display order is 160m CW, 160m SSB, 80m CW, 80m SSB, 40m CW, 40m SSB, etc. (MM0BQI) (coded by K3CT)
Info Window: In Multi-User mode when the station radio was configured for SO2V or SO2R, the Info window frequency updated when the inactive VFO (SO2V) or radio (SO2R) was tuned. (GW0ETF) (coded by K3CT)
Bug fixed: IOTA contest - Call History Lookup did not work for callsigns with “/” in them. (VE2FK) (coded by NA3M)

Version 10.7.1 (Experimental) (Started July 17, 2010) -- Download
Available Window: For VHF contests some button widths are too narrow for the text. Right clicking in the spot area when no spots are displayed, with a VHF contest loaded, displayed HF bands. In some cases, the active band button was not bold. (PC5M) (coded by K3CT)
CQWWVHF Contest: Rules link wrong for this contest and ARRL VHF. (K8GT) (coded by K3CT)
Available Window bug: Fixed error with IOTA contest when multiple mode band buttons are displayed. (WD4LBR) (coded by K3CT)
Eliminate erroneous prompt for run/mult station. (Coded by N1MM)

Version 10.7.0 (Experimental) (Started June 28, 2010)
N1MM Rotor: Corrected code to turn using DCU1 protocol (WB2RHM) (Coded by N1MM)
N1MM Rotor: Added code to stop rotor using DCU1 protocol (Coded by N1MM)
Fix crash if wheel mouse used when bandmaps are closed (K0VM) (Coded by N1MM)
Digital - Corrects issue of not loading correct macro set when right clicking on Digital macro button to edit it. (Coded by N2AMG)
DMC RTTY contest added. (W6WRT) (coded by NA3M)
Available Window Enhancement: For mixed mode contests, add mode band buttons that are colored based on the callsign log status. The mode columns that appear are dependent on the contest and the user selectable Mode Category in the contest setup window. Select "Mixed" for combined "CW/SSB" operation, "Mixed+Dig" for combined "CW/SSB/Digital" operation, or "Digital" for combined "RTTY/PSK" operation. (coded by K3CT)
Enhancement: Added Mode Category "Mixed+Dig" for CW/SSB/Digital contests. Made changes in the following areas to support Mixed, Digital, and Mixed+Dig Mode Category selectors: Configurer contact mode, telnet/packet spot filtering, Log window, Score window, Multiplier window, VisibleDupeSheet window, and Version 2.0 cabrillo output. (coded by K3CT)
Bug: Corrected some program and telnet filter issues that were based on the user selectable Mode Category. (coded by K3CT)
Bug: Corrected the IARU and WRTC zone logging error. (coded by K3CT)
Enhancement: Save the last used radio frequencies on program exit. (coded by K3CT & N1MM)
Enhancement: Changed the "Why don't I See Spots" display message and organization. (coded by K3CT)
Enhancement: Change order of several Bandmap right-click menu items. Place "Remove Selected Spot" at the top of the list. (coded by K3CT)
Enhancement: Changed the Band Up and Band Down routines to use program mode instead of radio mode. (coded by K3CT)
Update: "DLDXRTTY" merges RTTY and PSK into one digital contest mode. Update contest rules URL. (coded by K3CT)
Update: Identified "TARAPSK" as a PSK only contest. (coded by K3CT)
Update: Changed the internal contest type identifier to Mixed for the following contests: UBAON, UBASPRING, UBAWINTER, and HADX. (coded by K3CT)

Version 10.6.5 (Started June 21, 2010) -- Download
Bug: AADX, logging QSO without exchange (the age) was allowed (W4NZ) (coded by NA3M)
Bug: AADX, multiplier name in the Score window was always WPX regardless of the station location(JE1CKA) (coded by NA3M)
Bug: AADX, Log window does not have Exchange (age) column in it for stations from Asia (JE1CKA, UA0QBR) (coded by NA3M)
QSOParty Bug: SentExchange field overwritten when dialog window was re-opened. Bug introduced in version 10.6.3 (coded by K3CT)
Contest Configuration: Correct the internal contest mode name for the HADX, UBAON, UBASPRING, UBAWINTER contests. This may have caused some minor errors when using the keyboard key strokes to navigate the Bandmap spots. (coded by K3CT)
Updated callsign.pat (K1MK, K1TTT):
- update rules for Russian calls in accordance with Roskomnadzor
- call sign assignment document of 22 Jan 2010
- update rules for Brazilian call signs in accordance with Anatel
- call sign assignment document of 17 November 2006
- add rule for UB#AAAA calls
- add rules for RA##AAA and RA###AA special event calls
- add rule for U# block (unallocated since break-up of USSR)
Started coding for Cabrillo 3.0 support (N1MM)

Version 10.6.4 (Started June 19, 2010) -- Download
Bug: Removed the change in version 10.6.3 which displayed a warning message if the number of CW ports configured in SO1V and SO2V modes was greater than one. (coded by K3CT)
Started coding of Cabrillo 3.0 support (N1MM)

Version 10.6.3 (Started June 14, 2010) -- Download
Enhancement: Do not populate callsign from the current Bandmap spot when no radio is connected, callsign box is blank, S&P mode, and gridsquare is entered first. (PA5DD) (coded by K3CT)
Enhancement: Added validation code to the Station Information window to eliminate errors when the callsign or ARRL Section box is not populated correctly. Please open the Station Information window and click on OK to test this change. (coded by K3CT)
AR QSO Party: Update for 2010 rules changes. (N5NA) (coded by K3CT)
Enhancement: Added FT-80C radio with limited user testing. The FT-747GX should also function with this selection. The radio sends almost 800ms of data to the computer during each polling period so the program updates will be very slow. Need additional radio testers. (CO8CML) (coded by K3CT)
HI QSO Party & Call History: Change the ARRL Section logic so Out-Of-State users in the PAC section can correctly configure this contest. This also fixes a bug where "DX" could be populated in the State field during a Call History import. The code now uses the Station Callsign and the ARRL Section to make the State/Section determination. (AH0A) (coded by K3CT)
QSO Party Enhancement: Populate the Default Exchange box as the QSO party state is selected with the keyboard or mouse. Changed the wording of the In / Out-of-State configuration that appears after a QSO Party has been selected. (coded by K3CT)
Enhancement: Prevent users from using the program with the default N1MM Station Callsign. (coded by K3CT)
Radio Control Enhancement: Attempt to eliminate a Runtime error caused by a USB to COM port power down for the FT-950, FT-2000, FTDX-5000, and FTDX-9000 radios.
Enhancement: Add a configuration check on Configurer exit. Detect more than one CW port defined in SO1V or SO2V configurations. (coded by K3CT)
Enhancement: Add FT-857 radio selection. (N1MM) (coded by K3CT)
MARAC QSO Party bug: Made some changes when logging AK and HI stations. (coded by K3CT)
IN7QPNE QSO Party bug: Display the In-State/Out-of-State message. (coded by K3CT)
QSO Party bug: Fixed a bug in QSO parties that exchange Names. It was introduced when the MD QSO party updates were made. (coded by K3CT)

Version 10.6.2 (Started June 6, 2010) -- Download
Corrects Cabrillo Output for BARGT Sprint (Coded by N2AMG)
Digital - Adds all Standard Baud Rates to MMVARI Engines for RTTY Mode (Coded by N2AMG)
Digital - Adds PSK 250 to MMVARI Engines for PSK Mode (Coded by N2AMG)
Digital - Corrects issues where Multi Channels RX windows would not switch to current speed of Main Channel (Coded by N2AMG)

Version 10.6.1 (Started May 27, 2010) -- Download
Correct operation of wipe/unwipe (many) (Coded by N1MM)

Version 10.6.0 (Started May 27, 2010) -- Download
Make Alt-W, Wipe button and {Wipe} restore the last wiped contact, if all entry fields are blank. (W5KDJ) (Coded by N1MM)
Fixed random occurrences of serial number 1 when using LPT or COM port keying (RA9AM, NA3M) (coded by N2IC)
Digital - Corrects issues with DI's Frequency caption being incorrect with AutoTRX turned on (Coded by N2AMG)
Digital - Corrects issues with Fldigi setting radio to wrong frequency when Align Button Pressed (Coded by N2AMG)
Digital - Corrects issues with Fldigi PTT getting stuck on (Coded by N2AMG)
QSO Party Bug: Rescoring a 7QP log incorrectly counts the first KH6 as DXCC. (K8IA) (coded by K3CT)
Bug: Selecting DXSatellite contest produces a startup error. (N8MH) (coded by K3CT)
Enhancement: If radio times out, disable Advanced SO2V routines until radio is re-enabled. (coded by K3CT)
Digital - Corrects RT91 error when Selecting, Saving or Loading Macro sets in the Digital Setup window (Coded by N2AMG)

Version 10.5.4 (Started May 27, 2010) -- Download
Two Radio Protocol was not displaying properly in Configurer "set" dialog (K7GV) (Coded by N1MM)
UKSMG contest updated according to the new rules (G8FXM) (coded by NA3M)

Version 10.5.3 (Started May 22, 2010) -- Download
Bug: Error on program startup when the Configurer, Audio tab, Select Line to Mute selector is blank. (S51FB) (coded by K3CT)
Enhancement: Increase the number of characters that can be entered so that the two county 7QP exchange can be entered and force-logged. Note: The program score will not be correct and may not be scored correctly by IN and NEWE sponsors. Entering two separate QSO's is recommended. (coded by K3CT)
Enhancement: When opening a new database and selecting a duplicate name, improve the routine exit. (AH0A) (coded by K3CT)
bug fix - UNDX contest, logger would not accept the received exchange of a district code for a UN station (coded by NA3M)
Recovered Rotor program source code. The following bugs may have been reintroduced:
Rotor: was forgetting where it was positioned last (G3VAO)
Rotor: fix runtime error when clicking between spots and choosing "turn rotor" (N6RK)
Rotor control was always sending commands to the default rotor, rather than the rotor for the band specified. (N3MX)
Rotor program was not completely shutting down on XP systems (N2TU)

Version 10.5.2 (Started May 18, 2010) -- Download
WRTC competitors - Fixed country multiplier when working non-HQ station after working a HQ mult in the same country. (UA4WLI) (coded by N2IC)
IARU/WRTC - Fixed Canadian zone prefill when Call History is enabled. (coded by N2IC)
QSO Party Bug: The ADIF export from IN7QPNE contains a few state errors. Caused by county abbreviations that begin and end with state abbreviations. This change will only correct new logs. (N4DW) (coded by K3CT)
QSO Party Bug: Rescoring the 7QP QSO Party does not count the first 10 DXCC multipliers correctly. (KI7MT) (coded by K3CT)
PA QSO Party: VE multiplier change for 2010. (N3LI) (coded by K3CT)
MN QSO Party: Rules changes for 2011. (AC0W) (coded by K3CT)
HI QSO Party: Rules changes for 2010. (AH0A) (coded by K3CT)
MD QSO Party: Rules changes for 2010. The station class exchange is now populated when the first letter is entered. Testing by KS5A & W2CDO. (AA3RR) (coded by K3CT)
QSO Party Enhancement: For the QSO Parties that count DXCC as multipliers, color the multipliers from the telnet spots. This only occurs for in-state users of the following QSO Parties: AK, AR, AZ, CO, CT, DE, FL, ID, IL, KY, LA, MAQP, MD, NC, ND, NE, NEWE, NM, NV, ON, OR, SC, SD, TN, TX, VA, VT, WA, WV, and 7QP. A byproduct of this change is that stateside stations will also be colored red because the county can not be determined from the callsign or spot. Please test and evaluate. (K1TTT) (coded by K3CT)
PA Field Day: Create serial numbers by band for multi-multis (Coded by N1MM)
Added {QSYCQ} macro to allow QSYing to the last CQ frequency on the focus radio (Coded by N1MM)
Cat commands separated by / were not being separated (W2FU) (Coded by N1MM)
Orion needs more time for multiple set commands than was being allowed for. (Coded by N1MM)
Corrects Mode desginator in EUPSKDX Contest cabrillo file to "PM" (Coded by N2AMG)
Corrects an issue of PTT not working correctly when using PTT via radio and pressing the TX button on Fldigi (Coded by N2AMG)
Corrects issue on digital setup page when selecting Text Highlighting and clearing other settings (Coded by N2AMG)
bug fix: EUPSKDX - only PSK63 should be used according to new rules (G4OGB, KI7MT) (coded by NA3M)
bug fix: EUPSKDX - some territories (UA9A, F, G, S, W, UN7I, M, O) are partially in Europe by the contest rules(RV4HL, ON4ZD) (coded by NA3M)
Bug fix: link to the current rules of UNDX contest was corrected (coded by NA3M)
Enable call history lookup for IARU and WRTC contest for HQ multipliers. Correct format is: "W1AW,,,,ARRL,,," . (YV1DIG) (coded by N2IC)

Version 10.5.1 (Started May 8, 2010) -- Download
Bug fix: RFChamp - incorrect zone 0 is assigned to all stations in new ZK oblast, other minor fixes (RA6YDX) (coded by NA3M)
Contest addition: YUDX contest. (DL4HTK, KG4W) (coded by NA3M)
Bug fix: in ARIDX contest logger was crashing if received serial number is > 32767 (PA0O) (coded by NA3M)
Enhancement: for user defined contests, new parameter /ResetMultsEverySession/ was implemented, parameters /PointsPerContact/ and /BonusPoints/ were improved, see new help.txt (PH2M, UA3MIF) (coded by NA3M)
Mult Window: Correct total mult count on title bar (K3CT) (Coded by N1MM)

Version 10.5.0 (Started May 1, 2010) -- Download
Corrects Cabrillo Output for DLDCRTTY Contest. (Coded by N2AMG)
QSO Party: Increase the RcvExch Cabrillo output field from six to ten characters. (coded by K3CT)
Code change and diagnostic code to try to isolate problem when some computers in network are unreachable. (Coded by N2IC)
Bug #568 - Fixed Keyboard CW window not keeping up with typing (W1TR, W4BQF, VE6LB, KZ5D, W1HIS, ...) (Coded by N2IC)

Version 10.4.9 (Started April 30, 2010) -- Download
Clear two radio protocol when set clicked if protocol combobox is not visible (Coded by N1MM)
QSO Party: For the IN, 7QP, and NEWE QSO parties support the rule that stations which move to another county, even if out of state, count as a valid contact. Log all out of state stations with the full exchange. (K6LL) (coded by K3CT)
PA QSO Party: Rules changes for 2010, no fractional CW QSO points. The VE multiplier change will be released later. (N3LI) (coded by K3CT)
QSO Party: For the IN, 7QP, and NEWE QSO parties, support the rule, when stations in the other two QSO parties move to another county, score the QSO as a valid contact. Reminder to users, log all out of state stations with the full exchange. (K6LL) (coded by K3CT)
QSO Party bug: When using Quick Edit in 7QP, IN, and NEWE QSO parties, populate the exchange box with the correct database field. If there is any problem with this change, right click on logged contact in the Log window and select Edit Contact. (coded by K3CT)
QSO Party bug: In the 7QP, IN, and NEWE QSO parties, when working a station in the other two QSO parties again, populate the Exchange box with the proper database field. If the station has moved to a different county, there is no need to manually delete the hi-lited exchange text. Just enter the new exchange. (coded by K3CT)
PA QSO Party: Rules changes for 2010, no fractional CW QSO points. The VE multiplier change will be released later. (N3LI) (coded by K3CT)

Version 10.4.8 (Started April 29, 2010) -- Download
Rebuild of 10.4.7 with missing MARAC sections added. (Coded by N1MM)

Version 10.4.7 (Started April 26, 2010) -- Download
QSO Party Enhancement: When changing the RoverQth, validate the entry with the county abbreviations. If an invalid county entry is required, the user can populate the RoverQth in the Station Information window. (W4NZ) (coded by K3CT)
Enhancement: Added {PGDELAY} macro for the users with radios that need delay when using the {PGUP} or {PGDN} macros. Details are in the manual, Macro section (tnx N4ZR). (DK8NT,N4ZR) (coded by K3CT)
QSO Pary Enhancement: If after checking the log the exchange box is blank and callsign is VE, populate with the section based on the prefix if possible. (coded by K3CT)
QSO Party Enhancement: Added the MARAC QSO party in the QSOPARTY contest selection. (coded by K3CT)
QSO Party Enhancement: Suppress the Log window country column for those QSO parties that don't count DXCC as multipliers. (coded by K3CT)
SD QSO Party: Update for the SD QP rules change. (VE3RHD) (coded by K3CT)
MN QSO Party: When non-US/VE callsign is entered, populate the exchange with "DX" instead of the country prefix. (coded by K3CT)
Bug: CQWPX Log window should display sent/received RST. (PH2M) (coded by K3CT)
Bug: ON QSO party, the callsign N2IC/HI3 is not counted as multiplier and bonus calls with /R are not assigned the correct points. (VE3CX) (coded by K3CT)
Bug: Contest rules URL is incorrect for EQSO and QCWAQSO selections. (N4ZR) (coded by K3CT)
Bug: BC QSO party, counties missing from QSOParty.sec file in versions 10.2.1 to 10.4.2. (coded by K3CT)

Version 10.4.6 (Started April 25, 2010)
Digital(MMVARI) - Corrects issue of PSK Engines AFC Button not enabling after using Multi-RX (Coded by N2AMG)
Digital(MMVARI) - Corrects issue of TX Frequency not moving when pressing ALIGN with Net off (Coded by N2AMG)
Digital - Adds {ALT-T} as a macro substitution Functions same as keyboard ALT-T (Coded by N2AMG)
Digital - Adds {ALT-Q} as a macro substitution Functions same as keyboard ALT-Q (Return to CQ Frequency) (Coded by N2AMG)
Contests - EA PSK Contest Corrects cabrillo Output for PSK contacts as "PS" (Coded by N2AMG)
Digital - Adds setting in Digital setup to allow user to choose either to have RX Text highlighted either in Foreground or Background of text (Coded by N2AMG)
Digital - Adds checking in Callsign validity routines to see if is grid square or not so they will not be highlighted as calls (Coded by N2AMG)
Digital - Corrects issues where in SO2R and Send corrected call was turned on it where callsign would always be sent before F3 message (Coded by N2AMG)
Adds DRCG Long Distance Contest (DLDCRTTY in selection menu) (Coded by N2AMG)
Corrects issue with DI's RX/TX Buttons not coloring correctly when using Fldigi (Coded by N2AMG)

Version 10.4.5 (Started April 24, 2010) -- Download
Bug: FL QSO party, can't log callsigns with /number. (coded by K3CT)

Version 10.4.3 (Started April 12, 2010) -- Download
ARRL Rookie Contest: Fix for stations outside US (Coded by NA3M)

Version 10.4.2 (Started April 12, 2010) -- Download
QSO Party Addition: Add QCWA QSO party (QCWAQSO). (NB8Q) (coded by K3CT)
QSO Party Addition: Add Elecraft QSO party (EQSO). (coded by K3CT)
SP DX: Changed rules URL, Cabrillo for non-SP stations, default exchange. (coded by K3CT)
bug fix: UkrChamp and other contests with time sessions – multipliers did not reset for new session. (UR0MC, UX1IL) (coded by NA3M)

Contest Addition: Add ARRL Rookie Roundup contest (RRCW, RRSSB, RRRTTY). Note: real time log submision is NOT implemented. (coded by NA3M)
Contest Addition: Add Gagarin Cup contest (GCUP). (coded by NA3M)

Version 10.4.0 (Started April 4, 2010) -- Download
Load correct contest module for WRTC participants (coded by N2IC)
bug fix: "User Define Contest file for DELETEDQS contest is missing" message shows up every time new database is created (PA3ARM) (coded by NA3M)
Enhancement: Added Icom IC-738. (NY4I) (coded by K3CT)
Enhancement: Added {FORCELOG} and {FORCELOGNOTE} macros. These macros add the ability to force-log a contact identical to Ctrl+Alt+Enter. The first macro does not prompt the user for a QSO log note. The other macro does. (K2KW & GM3SEK) (coded by K3CT)
Enhancement: Single clicking on a Telnet spot with QSX now programs the radio split. (W3TMZ) (coded by K3CT)
QSO Party Addition: Add MT QSO party. (KI7MT) (coded by K3CT)
QSO Party Enhancement: 7QP stop counting DX multipliers after working ten DX multipliers. (coded by K3CT)
QSO Party Update: MIQP changed from 14 to 13 VE multipliers. (K2KW) (coded by K3CT)
QSO Party Update: NVQP updated per the current rules. (coded by K3CT)
QSO Party Enhancement: Added the ability for in-state users of the IN, NEWE, or 7QP QSO parties to log contacts from the other two QSO parties active this weekend. Use the five letter NEWE abbreviations. The common three letter county abbreviations with INQP were removed. For the Cabrillo output to be accurate and allow submitting logs to all three QSO parties, log the entire exchange received. (coded by K3CT)
QSO Party Addition: Added the "IN7QPNE" QSO party for those users that are "out of state" in the IN, NEWE, or 7QP QSO parties. The IN7QPNE QSO party will allow out of state users to log all three QSO parties. Note that the mults by band/mode rule is not the same in these three QSO parties. The IN QSO party rule was used. (coded by K3CT)
Enhancement: Detect the Icom USB audio codec by the selected audio device name and remove the Radio Codec checkbox in Configurer, Audio tab.
Bug: If the selected DVK audio device does not expose a mute list, the code muted the main audio output. (coded by K3CT)
Lots of QSO party code changed in this release. Please test all QSO parties prior to the contest weekend.
bug fix, RDXC - incorrect multiplier calculation (ZL1TM, PA3ARM) (coded by NA3M)

Portugal Day contest updated per new rules (CT1ILT) (coded by NA3M)

bug fix, lockout function for MULTI-ONE was not blocking second TRX on other band. For the contests that do not require this new option added in Config/MultiUser Tools - "Block my Tx Only if Other Stn Transmitting on Same Band&Mode" (RA3TT, HB9DDO) (coded by NA3M)

Enhancement, UDC feature - multipliers reset for every time session added, other (see UDC Help.txt file) (WS4T) (coded by NA3M)
Updates to the following QSO parties: GA, FL, NE, MO, and OK. (coded by K3CT)
Updated county abbreviations or state/VE for the following QSO Parties: AR, MO, MI, FL, GA. (coded by K3CT)
Please test state QSO party in advance and report any issues.
bug fix: EARTTY, any multi TX category should use serial numbers by band (RA0AM) (coded by NA3M)

Version 10.3.6 (Started March 25, 2010) -- Download
Added missed change that was supposed to be in 10.3.5 (Coded by K3CT)

Version 10.3.5 (Started March 18, 2010)
Changes to WPX SSB and WPX CW for multi-single, 10 band change per hour rule. (coded by N2IC)
FocusOther not working correctly when "ESM only sends your call once in S&P" option is not selected.
Enhancement: Prevent Runtime errors when a selected sound card is not present during program start. (coded by K3CT)
Enhancement: Add FTDX-5000 radio. Owners, please report test results. (VA2AM) (coded by K3CT)
Enhancement: SO2V features added for radios with SUB receiver. Currently IC756/Pro-/Pro2/Pro3, IC7800, IC7600, Orion, and K3 radios are enabled while testing continues. In SO2V mode, while CQ repeat is running, users can tune band with Sub Rx by pressing the \ key. When CQ repeat timer expires, the next CQ is sent. Typing a key or sending in either Entry window will cancel CQ repeat. Ctrl+F1 can be used to restart CQ on VFOA from the VFOB Entry window. No need to change TX focus before transmitting, the transmit VFO switching is automated. (coded by K3CT)
Enhancement: Grave accent and Alt+Ctrl+D changes for radios which have the new SO2V feature enabled. The manual has already been updated. Tnx N1EU & N4ZR for manual updates. (W4TV) (coded by K3CT)
Enhancement: Add DIGITAL in the contest Mode Category pull-down and associated program changes relating to this option. (K4XU) (coded by K3CT)
Enhancement: Extend radio interface timeout when program exit window is displayed. (KK1L) (coded by K3CT)
Enhancement: K3 radio control changes for split, sub, Alt+F12, and diversity. Requires K3 firmware 3.46 or newer. The Supported Radios section of the manual has already been updated. Tnx N1EU & N4ZR for manual updates. (N1EU & W4TV) (coded by K3CT)
Enhancement: Add radio polling for Diversity and Dual Receive to Orion for the new SO2V features. See the Supported Radios section of the manual for updates and definition of Dual Receive & Diversity. Tnx N1EU & N4ZR for manual updates. (N1EU) (coded by K3CT)
Enhancement: The Orion Sub to VFO association should only change for specific program features. (N1EU & W2WG) (coded by K3CT)
Bug: Correct ALT+F5 operation in SO2V mode, disabled in SO1V mode. (N1EU) (coded by K3CT)
Bug: CO & VA QSO Party does not count multipliers logged with CALLSIGN/M. (N2CU) (coded by K3CT)

Version 10.3.4 (Started March 17, 2010) -- Download
bug fix - RSGB80MCC contest, non-UK calls should be grey for non-UK station (DK8NT) (coded by NA3M)
bug fix - BSCI contest can not be initialized in latest versions (ER3AU) (coded by NA3M)
Enhancement: UkrChamp contest, cursor should skip oblast entry field if it is known (UX1IL) (coded by NA3M)
bug fix - ARRL DX, when CallHistory Lookup is on multiplier colors sometimes were wrong for callsigns with known states. (DK8NT) (coded by NA3M)
bug fix - Multipliers window does not reset for multi session contests (UX1IL) (coded by NA3M)
bug fix - Default Sent exchange for RFChamp was changed (coded by NA3M)
bug fix - DZCUP contest, Cabrillo error for SP/LO stations (RA1AR) (coded by NA3M)
Enhancement: RSGB-BERU contest, enter just "H" for "HQ" station to save time (GM3SEK) (coded by NA3M)
bug fix - Bandmap problem for local stations with "¤" character (sunset/sunrise) (RA3TT) (coded by NA3M)
Enhancement: User Defined Contest feature release (coded by NA3M)
Corrections made to oblast.sec file to reflect recent changes to Russian callsigns and oblast list changes (DL6KVA, W4TV) (Coded by NA3M)

Version 10.3.3 (Started March 15, 2010) -- Download
10.3.2 was pulled because it had a looping issue.
Bug 517 - Visible Dupesheet now has a choice of small or large font. Right click on gray space at right of form to select font size. (DK8NT) (coded by N2IC)
Bug 529 - Export/Import RadioInterfaced field in ADIF (KE7X) (coded by N2IC).
Initialize OTRSP port on startup and when running the configurer. (K1XM) (Coded by N1MM)
Set default OTRSP port to 9600 when OTRSP is selected (K1XM) (Coded by N1MM)
Update broadcast info on focus window change to allow external programs to return to the correct window (WC1M) (Coded by N1MM)
Bug fix – in RSGB-BERU contest Check and Available windows did not show multipliers properly (VE3KI), (coded by NA3M)
Bug fix – in RFCHAMP contest Check window did not show dupes correctly for different sessions (RA6YDX), (coded by NA3M)
Bug fix – in RFCHAMP contest Visual Dupesheet did not reset for new sessions (RA4LW), (coded by NA3M)
Bug fix – problems with Footswitch in SO2R/SO2V when using ESM (GW0ETF), (coded by NA3M)
Entry window: Changed wording of menu item for function key definitions to match documentation (N4ZR) (Coded by N1MM)

Version 10.3.1 (Started March 9, 2010) -- Download
Change Cabrillo name field length to 10 characters for MN and CO QSO party output. (AC0W) (coded by K3CT)
Updates for WV QSO party rules changes. (KZ8E) (coded by K3CT)
Update for NC QSO party points and add Rover output to Cabrillo output. (WA4PGM) (coded by K3CT)
Bug: Read Years.sec file at startup. (coded by K3CT)
Bug: Program was reading StatesAndProvinces.sec file at every startup. (coded by K3CT)
Enhancement: K3 when in Run mode and RIT is on, program the RIT frequency. (W6SX & W4TV) (coded by K3CT)
Digital - Corrects issue of Additional RX windows sending to wrong entry window in SO2V. (Coded by N2AMG)
Digital - Corrects not being able to click on call found in garbage. (Coded by N2AMG)
Digital - Corrects not removing call correctly from grab list when double calls in list. (Coded by N2AMG)
Digital - Corrects issues with Fldigi's PSK Browser from clearing lines every few times a second. (Coded by N2AMG)
Digital - Corrects issue where Fldigi would not open back where is was last used at on the screen. (Coded by N2AMG)
Digital - Corrects issue when using Fldigi and Align button not functiong when Auto RX Update was turned off (Coded by N2AMG)
Digital - Adds Lock and Reverse Controls for Fldigi to the Digital windows. (Coded by N2AMG)
Made changing window position on op change automatic (Coded by N1MM)
bug fix - in RSGB-BERU contest VE9, VY0 and ZL0 were rejected as non-Commonwealth areas if cty-BERU-20100308.dat is used VY2SS), (coded by NA3M)

Version 10.3.0 (Started March 7, 2010) -- Download
RSGB Jubilee: removed as a new contest (GM3SEK) (Coded by N1MM)
RFCHAMP contest - corrected contest name in Cabrillo file (RK6YZZ) (coded by NA3M)
Ukraine Open Championship RTTY contest (UKRRTTYOPN) added (UZ2HZ) (coded by NA3M)
bug fix - switching to another database file with different callsign without program restart could cause strange behavior of the contest module (G0GDU) (coded by NA3M)
RSGB-BERU (RSGB Commonwealth) contest added (G0GDU, VE3KI) (coded by NA3M)

Version 10.2.7 (Started February 26, 2010) -- Download
Digital - PSK Engines When setting Multi-RX AFC and Level shows current settings in Input box (Coded by N2AMG)
Digital - Corrects issue of Call sign grabbing and highlighting when using the Master.dta settings (Coded by N2AMG)
Digital - If SO1V Default Dig Win Nr to 1 in Config Setup (Coded by N2AMG)
Digital - If SO1V Don't allow more than 1 digital port to be selected in Config Setup (Coded by N2AMG)
Digital - Corrects clicking of exchanges and not being written to the correct boxes on Entry Window (Coded by N2AMG)
Added (window handle) to frequency broadcast to facilitate returning focus to the program. Does not yet broadcast on focus change. (WC1M) (Coded by N1MM)

Version 10.2.6 (Started February 13, 2010) -- Download
CWOps contest - removed COMMENT field in ADIF file (W1EBI) (coded by NA3M)
UA1DZ Cup contest - changes made per new rules (RA1AR) (coded by NA3M)
BSCI contest (Black Sea Cup International) was added (UX1IL) (coded by NA3M)
Lookup table edit: added Scroll Lock as a character to select row for editing (GM3WUX) (Coded by N1MM)

Version 10.2.5 (Started February 10, 2010) -- Download
Digital - Corrects Issue of MMVARI Multi-RX windows from not initializing (Coded by N2AMG)
Digital - Corrects issues with Highlighting calls in garbage that are in the master.dta file (Coded by N2AMG)
Digital - Corrects issue in SO2V with 1 Digital window not aborting TX when ESC Pressed (Coded by N2AMG)
Digital - Corrects issue when dragging Channel markers in MMVARI waterfall and main Frequency moving (Coded by N2AMG)
Digital - Corrects issue of AFC state not being set on startup for the Multi RX windows. (Coded by N2AMG)

Version 10.2.4 (Started February 7, 2010) -- Download
Update callsign patten rules for Indonesia to ORARI 2009 bandplan (YB0AZ, K3CT)
NM QSO Party: Correct cabrillo output (Coded by N2IC)
Added CW IF.exe to new exe distribution to allow builds of test versions (N2IC)

Version 10.2.3 (Started February 6, 2010) -- Download
Fix error code 91 when hitting CQ Button when bandmap is not loaded. (coded by N2IC)

Version 10.2.2 (Started February 2, 2010) -- Download
Fixed crash when using mouse wheel after closing one of the bandmaps (K4DLI, K8IA) (coded by N2IC)
CWOps contest - corrections for exchange, default SentExchange (KZ5D) (coded by NA3M)
Russian DX PSK contest (RUSDXPSK) added (RA3BB) (coded by NA3M)
Digital- Fixes focus switching to Entry window when CTRL-K is pressed (Coded by N2AMG)
Missing support file prevented other database updates from being run. Added a user prompt when files can not be found. (coded by K3CT)
Updates for the DE and VT QSO Party. Implemented the power multiplier for both QSO Parties. (coded by K3CT)
Please test before the weekend and notify the developers in advance when QSO Party rules change.

Version 10.2.1 (Started February 2, 2010) -- Download
Enhancement: Add BC QSO Party (Feb 6, 2010). (VE7FO) (coded by K3CT)
Enhancement: Display Mult1 and Mult2 columns in QSO Party text log output. (coded by K3CT)
Enhancement: Disable Ctrl_Shift+K in SO1V mode and prevent second Entrywindow from opening unexpectedly. (K0RC) (coded by K3CT)
Enhancement: Close second Entrywindow and Bandmap when switching between SO2R/2V and SO1V. (K0RC) (coded by K3CT)
Enhancement: Ctrl+Alt+D changes the state of the Config, Dual Rx Always On option and sets Sub state. (N1EU, W4TV) (coded by K3CT)
Enhancement: Disable the grave accent keystroke ( ` ) in SO1V mode. (coded by K3CT)
Enhancement: Prevent second Entrywindow and Bandmap from opening in SO1V mode on startup. (coded by K3CT)
Enhancement: Increase Bandmap zoom range to reduce the callsign crowding. (WE3C) (coded by K3CT)
Bug: LZOpen, OffTime calculation, change the contest length to 6 hours. (LZ2BE) (coded by K3CT)
Bug # 455: Changing the size of the Bandmap can leave the frequency pointer at the incorrect location. (S56A) (coded by K3CT)
Bug: When switching between SO2R/2V and SO1V mode with specific program options & keystroke order, the program crashes. (K0RC) (coded by N1MM)
Bug: The {StereoOff} and {StereoOn} macros did not correctly call the DVK is active function with the radio number. (coded by K3CT)
Bug: When returning to a previous band with Ctrl+PgUp/Dn, the frequency can be wrong. (W4TV) (coded by K3CT)
Bug: SO2V & Icom radios when using Shift+Ctrl+Up/Dn from VFOB, the radio wasn't programmed correctly. (coded by K3CT)
Bug: When changing bands between 40m / 20m with Ctrl+PgUp/Dn, the wrong SSB mode is selected. (W4TV) (coded by K3CT)
Bug: When using Shift+Ctrl+Up/Dn in SO2V mode and a split spot is selected, print the QSX message in the active Entrywindow. (N1EU) (coded by K3CT

Version 10.2.0 (Started February 1, 2010) -- Download
Commonwealth Contest: Add Rwanda (9X) as Commonwealth country (G4LMW) (Coded by PA1M)
Added new "FocusOther Always Swap" option to SO2R menu. If Focus Other is enabled, and the FocusOther Always Swap option is checked, the receive focus will always return to the CQing radio after the CQ has finished (Coded by N2IC)
Score Reporting: Eliminate error 10048 caused by real time score reporting app hogging the udp port (N4ZR, W1VE)(Coded by K1TTT)
Update to wav DLL to allow use of non-default sound cards in Vista & Windows 7 (Coded by K1TTT)
Change default sound card selection to "Default" (K1TTT) (Coded by N1MM)
Fix error on startup about incorrect configurer mode tab (K1TTT) (Coded by K3CT)
Bug 486 - Fixed SO2V operation with YCCC SO2R box (K1TTT) (coded by N2IC)
Fixed error in General DX Log when call history locator1 doesn't have grid square (K1RY) (coded by N2IC)
Remove temporary file temp$$$$.mdb after copy database operation (K1RY) (coded by N2IC)
Digital- Adds Clear Grab window on CQ Setting to Digital setup window (Coded by N2AMG)
Digital- Adds Sort Order menu selection to Grab window Right Click menu (Last In/First Out or First In/First Out) (Coded by N2AMG)
Digital- When switching to RTTY or PSK from Entry window will give MsgBox warning if not a Digital or Mixed Contest (Coded by N2AMG)
Digital- Changes order in which calls are colored when using Find in garbage. ex.ABCDK7WA would highlight K7WA instead of DK7WA as DK7WA is not in Master.dta file (Coded by N2AMG)
Digital- Adds ability to click on exchange in RX window and overwrite prefilled data in Entry Window boxes (Coded by N2AMG)
Digital- Stops Blank macro's from transmitting (Coded by N2AMG)
Digital- Corrects issue with SO2R Last one wins Lockout from aborting TX on same radio that transmitting when the F-Key press is from that radio (Coded by N2AMG)
Digital- Corrects issue with SO2R not stopping transmit on transmitting radio when focus shifted to other radio (Coded by N2AMG)
Digital There have been a number of changes to the Digital Source for the addition of Fldigi as a Data Engine. The addition if not complete yet But please report any oddities you encounter.

Version 9.12.9 (Started December 31, 2009) -- Download
Prevent runtime error 91 when using {stereoon/off} and no lpt port defined for the radio. (K1MK) (Coded by N1MM)
Experimental version testing change of program from ActiveX exe to standard exe to eliminate "Unexpected Error; Quitting problem (many) (Coded by N1MM)

Version 9.12.8 (Started December 29, 2009) -- Download
RFC contest - resetting dupes for new contest period was not always working (RA3CM) (coded by NA3M)
Contests using TOUR command - logger was crashing if in SO2V/SO2R mode (RA3CM) (coded by NA3M)
Multiple corrections for CWOps contest (KZ5D) (coded by NA3M)
AGCW contest - every QSO with AGCW member is multiplier on every band (DF6FR) (coded by NA3M)

Version 9.12.7 (Started December 27, 2009) -- Download
Changes for New Mexico QSO Party (coded by N2IC).
Added support for WRTC-2010 for competitors (coded by N2IC)
Bug: WI QSO Party: Modify cabrillo output for rover. (K9BTQ) (coded by K3CT)
Bug: CT QSO Party: Change URL and bonus station. (W1IG) (coded by K3CT)
Bug: All digital modes should use the CW tune increment value, PSK / AFSK was missing. (coded by K3CT)
Bug: Manual radio with PSK or AFSK selected should use the RTTY default frequency. (coded by K3CT)
Enhancement: When CW or SSB tune increment is 0 Hz, bypass the entire tune up/down routine. (N4ZR) (coded by K3CT)
Enhancement: When non-polling commands are sent to an Icom radio, change the rate at which the commands are sent. (coded by K3CT)
Enhancement: Improvements in Icom VFO switching rate when the TX focus needs to change prior to the beginning of a transmission. (coded by K3CT)
Enhancement: Improve the Up/Dn Arrow key frequency tuning speed. Signficant improvement for Icom radios. (coded by K3CT)
Enhancement: Change the Elecraft K3 Com port setup note window text. (VE3KI) (coded by K3CT)
Enhancement: When the maximum number of calls is reached in Visual Dupe Sheet window, don't clear the window. (W7GKF) (coded by K3CT)
Enhancements Visual Dupe Sheet: Don't display DUPE calls in window, add a status line at the bottom of the window to display when the maximum call limit has been exceeded, support band mode/all band contests, support Rover mode (current Rover QTH), open one window in SO1V mode, and set the maximum number of calls displayed to 800. Verification by W7GKF. (coded by K3CT)
IC7600/7200 Radio Codec Support: With some computers, codec audio switching wasn't reliable. Program startup with radio turned off caused Runtime error. Eliminate duplicate radio codec switching commands before digital transmission begins. (coded by K3CT)
RAEM - points calculation corrected, could not log RAEM when Visible Dupesheet window open (RU3SE) (coded by NA3M)
AGCW HNY - corrected Cabrillo/General fields, multiplier problem when CallHistory Lookup is off (DL5YM, PA7RA) (coded by NA3M)
CWOps contest added (KZ5D) (coded by NA3M)

Version 9.12.6 (Started December 21, 2009) -- Download
Correct bearing lookup for PEI & NWT (K1NYK) (Coded by N1MM)
Updated callsign pattern file (Coded by K1TTT)
Corrects losing focus when in Keyboard mode in DI's (Coded by n2AMG)
Corrects partial Own station call signs from showing in Grab window. (Coded by N2AMG)
When using not highlighting call in Master.dta file allow non highlighted calls to show in Grab window. (Coded by N2AMG)
Stew Perry: Correct start time calcuation (DK8NT) (Coded by N1MM)

Version 9.12.5 (Started December 17, 2009) -- Download
Don't flash app icon in task bar when tuning. Used to bring app to foreground, but OS no longer allows it. (Coded by N1MM)
Feature 0000449: Show total spots on a band in Qs column of available window (N4ZR) (Coded by N1MM)
For CQ WPX, change multi-single handling to generate a single sequence of serial numbers across all bands. (Coded by N2IC)
Available window was not showing tooltips for spots and other issues caused by not returning result from method FindSpotOnThisBand (K1MK) (Coded by N1MM)

Version 9.12.4 (Started December 16, 2009)
Fix quoted strings in help search in entry window (Coded by N1MM)
Significant packet spot performance improvements (Coded by N1MM)
Bug 0000450: Restore SO2R settings after Dueling CQ (N4ZR) (coded by N2IC)
Bug 0000448: Make SO2R commands (FocusOther, CTRLFx Toggle) sticky (N4ZR) (coded by N2IC)

Version 9.12.3 (Started December 6, 2009) -- Download
Reorganize the keyboard CW code into Winkey and non-Winkey segments. Makes it more maintainable. (Coded by N2IC)
Grayline: prevent multiple copies from running at one time. (K3CT) (Coded by N1MM)
Grayline: detect invalid screen coordinates and correct (Coded by N1MM)
Grayline: prevent azimuthal projection (a projection that is not supported) (Coded by N1MM)
International Naval contest (NAVAL) added (PA3EVY) (coded by NA3M)
MiniTest CW contest added (RA3CM) (coded by NA3M)
RAEM Contest - band change counter added (RA3CM) (coded by NA3M)
RFCup CW/SSB Contest - corrected points calculation, 2 time periods supported (RA3CM) (coded by NA3M)
9A CW Contest - 10 min band timer added, it does not start if working multiplier on other band (RA3CM) (coded by NA3M)

Version 9.12.2 (Started December 6, 2009) -- Download
Fix keyboard CW for non-Winkey users (coded by N2IC)

Version 9.12.1 (Started December 4, 2009)
Prevent a closed bandmap from being redisplayed if Entry window is minimized and then restored. (E71DX) (Coded by N1MM)
Prompt for run/mult for multi-single in CQWW contests (N9ADG) (Coded by N1MM)
The ; and = keys stopped working after the keyboard CW window is closed with ctrl-k. This has been corrected (coded by N2IC).

Version 9.12.0 (Started December 1, 2009)
With keyboard CW, under some conditions, the same character could be sent twice. This has been corrected (coded by N2IC).
Overflow errors using when logging > 32767 contacts using multi-user mode. (IK2HKT)
Changed application to use n1mm.hamdocs.com help rather than a local help file (Coded by N1MM)

Version 9.11.1 (Started November 19, 2009) -- Download
Names from call history > 20 characters were preventing contacts from being logged in DXSerial contest. Limiting new and existing call history names to 20 characters. (G7TWC) (Coded by N1MM)
Change link to super check partial files to: http://www.supercheckpartial.com/ (W2NRA) (Coded by K3CT)
Enhancement: Added support for the IC-7600 and IC-7200 USB codec. IC-7600 users can use the USB cable for radio control, AFSK RTTY, PSK, recording voice messages on the fly, voice message playback, and recording QSO’s. IC-7200 users can not record messages on the fly. In CW, only the received portion of the QSO is recorded. These are radio limitations. Tnx NN3RP for IC-7200 radio testing. (coded by K3CT) Until the instructions can be added to the manual see: http://mysite.verizon.net/k3ct/HamRadio/IcomUSBCodecInstructions.zip
WAG Updates: "NM" exchanges are zero point, first alpha counts as mult, numeric exchanges are not mults. (VE1DT) (coded by K3CT)
IC-7200 Enhancement: Added support for LSB-D and USB-D modes and updated the digital mode selector. (coded by K3CT)
IC-735 Bug: Problems when entering radio modes in the Entrywindow. The IC-735 radio control is limited. This effects filter switching, PTT via radio command, and split. (VU2PTT) (coded by K3CT)
Transverter Bug: In VHF mode, ALT+F7 does not program the radio split correctly when the transverter table is populated. (DH7KU) (coded by K3CT)
Moved the MuteMic code into the radio module. (coded by K3CT)
QSO Party Bug: The Bonus Station message appears twice when switching between QSO Party contests. (coded by K3CT)
Bug: Alternate antenna can be selected with ALT+F9 when the transmitter is active. (LZ2BE) (coded by K3CT)
Added {VARYMSG1} and {VARYMSG2} macros. These allow users to modify the sent message based on the number of times the function key is used. (N2WQ) (coded by K3CT) Until the instructions can be added to the manual see: http://mysite.verizon.net/k3ct/HamRadio/VaryMsgText.zip
FT-990 Bug: In SO2R configuration Bandmap spots are sent to VFOB when the radio is inactive. (K2YR) (coded by K3CT)
KY QSO county abbreviations changed. (W9WI) (coded by K3CT) Please notify the development team when changes occur in your state QSO parties.
Bug: When clicking on the Bandmap filter bandwidth button with Icom radio, the mode changed when using PSK or AFSK. Disabled filter button for these cases. Will be re-enabled when the supporting code can be added. (coded by K3CT)

Version 9.11.0 (Started November 1, 2009) -- Download
Ukrainian Championship contest (UKRChamp) added (UX1IL) (coded by NA3M)
JT DX contest added (JT1CD) (coded by NA3M)
AGCW HNY Contest added (DL6KVA, PA7RA) (coded by NA3M)

Version 9.10.3 (Started October 16, 2009) -- Download
Note: This version contains a useful fix for FT-1000MPs. When clicking on spots, the program was sending 2 or 3 commands to the radio instead of the typical 1. This fix only sends the commands when they are required, rather than every time. Since this is a popular radio, and for assisted or multi-transmitter stations this is an important fix, I have put it out quickly. If you detect any issue with it, please revert to your prior version. I don't expect problems but have been in this business long enough to know anything can happen.
AZ QSO Party Bug: Counties are not counted as multipliers for in-state participants. Bonus station not counted. (N7MAL) (coded by K3CT)
FT-1000MP: eliminate excess commands sent to radio when clicking on spots (Coded by N1MM)

Version 9.10.2 (Started October 8, 2009) -- Download
Corrects TARA PSk Rumble issue of not being able to over-ride EW exchange box. (Coded by N2AMG)
Corrects Canadian Prefix error's in the BART.sec file used by many contest modules. (Coded by N2AMG)
Corrects CQ Repeat with DXP-38 from not working. (Coded by N2AMG)
Corrects Makrothen RTTY to use left 4 characters of your Grid square for score calculations. (Coded by N2AMG)

Version 9.10.1 (Started October 5, 2009) -- Download
Send null message to WinkeyUSB periodically to keep USB port from going to sleep (coded by N2IC).
Bug 414 - Update country/bearing in Info window using Entry Window callsign, not bandmap callsign (ON5ZO) (fixed by N2IC).
PA QSO Party Bug: Remove the change made in version 9.9.8 to the bonus points. All points are doubled due to the fractional CW QSO point. (coded by K3CT)
BFRR Championship contest Bug: TOUR message window pops up during database load. (coded by NA3M)
PA QSO Party Bug: Remove the change made in version 9.9.8 to the bonus points. All points are doubled due to the fractional CW QSO point. (coded by K3CT)
QSO Party Improvement for logging mobile stations that don’t identify as mobile. When a station call is entered on the same band and mode, initially flag it as a Dupe and populate the county. If the exchange is changed to a unique county, process the QSO as a valid contact. If using ESM, “work dupes when running” will have to be checked. (several) (coded by K3CT)
QSO Party: Add the CT QSO party. Please test and report any issues. (coded by K3CT & N1MM)

Version 9.10.0 (Started October 1, 2009) -- Download
BFRR (Belorus) Championship CW/SSB contest added (EU1PA, EW1NA) (coded by NA3M)
bug # 389 the exchange was not prefilled from the previous QSO(s) (N6ML) (coded by NA3M)
VHF CFO contest - added SentNR and NR to the Log window (UA9OL) (coded by NA3M)

Version 9.9.8 (Started September 22, 2009) -- Download
Fix QSO numbering for CQP multi-multi (N6ML) (coded by N2IC)
PA QSO Party Bug: Bonus points added for QSO's with N3KAE should be 200 points. (N3DAP) (coded by K3CT)

Version 9.9.7 (Started September 22, 2009) -- Download
If SFC enabled don't change transceiver offset when making band change. (Coded by N2AMG)
Catch error described http://support.microsoft.com/kb/318784 in winkey code (many) (Coded by N1MM)
QSO Party Bug: After correcting a partial call with the state exchange populated, Enter does not update and log the contact. (K7QQ) (coded by K3CT & N1MM)
QSO Party Bug: If a contact is a dupe, do not evaluate it for a possible multiplier. (coded by K3CT)
WA QSO Party Bug: Cabrillo output incorrect for some DX callsigns. (K7QQ) (coded by K3CT)
Bug: ContactInfo terminator for the XML broadcast string appeared prior to the last two database fields that were added. This may fix the bridge to DXKeeper issue that was reported. (DM7FV) (coded by K3CT)
QSO Party Improvement: When populating the “DX” exchange for callsigns or callsign fragments that evaluate as non-US/VE calls, the DX exchange should be populated only when the exchange field is blank. This allows the operator to enter exchanges associated with partial callsigns. This change was made for the following QSO parties: PA, AL, NY, NJ, OH, MI, CA, IA, WI, and KS. The MAQP, NEWE, 7QP QSO parties still need to be updated. (coded by K3CT)

Version 9.9.6 (Started September 18, 2009) -- Download
Add GA,MA,2A prefixes - (many) (Coded by K1TTT)
Adds Shift Frequency Compensation settings to DI2- New setting in Digital setup.(If you currently use SFC you will need to reset your settings) (Coded by N2AMG)
Correctly clears SFC in DI2 when turning off it off. (Coded by N2AMG)
In digital setup prevents loading of macro's from file when zero macro's are cinfigured to be shown. (Coded by N2AMG)
Corrects form resizing in DI when switching from MMTTY to MMVARI.(Coded by N2AMG)
Adds multiplier .sec file for SCC RTTY Contest. "Years.sec" to display years worked on multiplier window. (Coded by N2AMG)

Version 9.9.5 (Started September 15, 2009) -- Download
Corrected ADIF output and bandmap when not using an interfaced radio. (many) (coded by N2IC)
When the club is configured as "Yankee Clipper Contest Club", ask the user to verify that this is correct. Note: This verification will only be requested once per database. (K1EA) (coded by N2IC)
Prevent the Pause and Ctrl-arrow keys from operating in SSB while a voice message is being played. This makes their behavior consistent with CW operation. (N6ML) (coded by N2IC)
Enhancement: Open the RoverQth dialog window with CTRL+H. (coded by K3CT)
Enhancement: Enable the repeat timer on the active radio when a CAT macro used in the “CQ” function key. Note: The repeat timer in this case starts when the radio command is sent to the radio. Users that use this function to trigger radio voice keyers must assign the radio command to abort the message in separate function key. (G4UJS) (coded by K3CT)
Enhancement: Add the Alinco DX-77 radio. (AC5TU) (coded by K3CT)

Version 9.9.4 (Started September 11, 2009) -- Download
Adds Multi ChannelRX to PSK engines. (8 channels for PSK,4 Channels for other modes) Thanks to Alex KR1ST for idea and layout (Coded by N2AMG)
Corrects ltrs/Figs from not displaying correctly in DI2 (Coded by N2AMG)
Changes some MMTTY startup settings in all Digital windows (Coded by N2AMG)
Corrects resize issues with PSK engines (Coded by N2AMG)
Corrects issue when in SO2V w/ one DI open and using Ctrl-K would try to send CW not RTTY (Coded by N2AMG)
WEA-RTTY Corrects issue of grabbing calls when sending/recieving QTC (Coded by N2AMG)
Corrects issue of when turning AutoTRX Offset off the offset was not clearing (Coded by N2AMG)
Corrects not sending TU Function key when using {LOGTHENGRAB} and no calls left in Grab window (Coded by N2AMG)

Version 9.9.3 (Started September 8, 2009) -- Download
Rover Enhancements: Update View-Statistics, File-Export/Import ADIF, and Rescore-Contest code for rover QTH. (W4NZ & K8JQ) (coded by K3CT)
Bug: KY QSO party update to current rules including bonus points. Limited time for testing. Please test as in state and out of state, report outcome. (coded by K3CT)
QSO Party Enhancements: If contact is forced to log, set the points to zero. In QSO parties that automatically populate “DX” as the exchange (excluding MAQP, NEWE, 7QP), do not populate with “DX” if the callsign contains a “/”. This will allow users to log stateside stations with “/R”. Allow out of state participants identifying with CALL/R to be logged. Update TN QSO party URL. Display bonus callsign message window when switching between QSO party contests with bonus point stations. (coded by K3CT)
Bug: LA stations can not log in any QSO party as out of state participant. This bug has been in the code for a long time. (KG5VK) (coded by K3CT)
Bug: Ref contests, start of contest calculation is incorrect. (coded by K3CT)
Enhancement: When exporting the Summary output file, add “ScoreSummary” to the default filename. (K8JQ) (coded by K3CT)
Bug # 332: Function key sending issue in SO2V mode when VFO’s have different mode. (K1TTT) (coded by K3CT)

** Please test QSO party functionality and report any errors two weeks prior to the contest. **

Version 9.9.2 (Started September 2, 2009) -- Download
Bug # 383: When mapping ESM function keys to F11 or F12 the next button colors are wrong. (K1TTT) (coded by K3CT & N2AMG)
Bug # 211: Multiplier window zone or country display in contests without multipliers causes RunTime error. (G3RIR) (coded by K3CT)
Bug # 323: Can not record messages with W9XT contest card. (K5PI) (coded by K3CT)
Bug: KS QSO party missing a bonus station. (coded by K3CT)
Enhancement: Display current QSO party bonus stations on program startup, allow users the ability to modify the list of stations. To change, enter BONUS + Enter in the Entry window callsign box. (coded by K3CT)
Enhancement: Added rover capability to the ARRL Jan, June, Sept VHF, CQ VHF, and all QSO party contests. RoverQTH can be set in the new Station window field, by right clicking on the county or grid in Multiplier window, or by entering ROVERQTH + Enter in the Entry window callsign box. RoverQTH can be 10 characters long but most Cabrillo output is five or six characters long. Added {ROVERQTH} macro to send the RoverQTH. Current RoverQTH is displayed on the Entry window boarder. Enabled by setting Operator Category to ROVER. Cabrillo output has been modified, other output files need similar changed. (coded by K3CT & N1MM)

Version 9.9.0 (Started September 1, 2009) -- Download
VHFUA1DZ contest (duplicating VHFDZCUP) was removed (coded by NA3M)

Version 9.8.6 (Started August 24, 2009)
Adds Hard coded routines for use with DXP38 TNC for easy access in the Digital windows and RX Windows (Coded by N2AMG)
Bug # 161 Corrects bug of not being able to send contact sent Nr when in Quick Edit mode. (Coded by N2AMG)
Corrects bugs in TNC routinesin the RX Windows and adds RTS and DTR settings to the setup window (Coded by N2AMG)
Sets Cabrillo Output for RSGB80CC contest to PS for PSK contacts. (Coded by N2AMG)
Corrects CTRL-K problems when digital windows were open and in CW mode. (Coded by N2AMG)
Corrects issues of EUAreaCodes.sec file not being loaded correctly causing problems for contests that use EU Area Codes (Coded by N2AMG)
YOHFDX: Correct computation of start time of contest (W4BQF) (Coded by N1MM)
Enhancement: VHF UA1DZ CUP Contest added (UA3PNO)(Coded by NA3M)
Bug # 379: UKRAINIAN DX Contest - new oblast mults on the band map are not colored in red (UA3MIF)(Coded by NA3M)
Bug # 377: RDAC - R1MVx and R1ANx now considered DX (RV2FW/1)(Coded by NA3M)
Enhancement: RDAC - use call history file to show colored mults in the band map (RX9TX)(Coded by NA3M)
Added VHFUA1DZ contest (UA3PNO)(Coded by PA1M)0
VHFREG1: Set MinimumOffTime from 0 to 30 minutes (for View | Off Time report) (Coded by PA1M)
FDREG1: Added support for Norway (LA1YPA ) (Coded by PA1M)
------ not supported: multiplier per radio but selected per band and VHF / UHF Activity points

Version 9.8.5 (Started August 20, 2009) -- Download
UBAON: Update code to 2009 rule change: DX can work DX for points. (Coded by ON5ZO)
Configurer dialog: do not allow Winkey and OTRSP/MK2R on the same port (W4TV) (Coded by N1MM)
Improve error handling during loading of Default Settings.txt (K3CT) (Coded by N1MM)\
Grayline: save window position more frequently to avoid erroneous window postions in qth.txt (many) (Coded by N1MM)
Bug #362 - Fixed $5 SO2R operation for SSB. SSB operation now works the same as CW. (N2QT, N6ML) (coded by N2IC).
Callsign pattern recognition changes (Coded by K1TTT)
Removed: Error - Only numbers 0, 1, 3 or 5 in calls starting M! (F6FVY)
Changed to strong warning: No US calls with QRA-QUZ suffix! (NA6M)
Removed: Error - CT5 call is a V/UHF license! (change in CT prefix structure)
Removed: Warning - rare, CT6,CT7 & CT8 are special event / contest prefixes. (change in CT prefix structure)
Allow entry window display of grid squares from imported beacons file (PA5DD) (coded by N2IC)

Version 9.8.4 (Started August 10, 2009) -- Download
Configuration Dialog: fixed tab order (K1XM) (Coded by N1MM)
Configuration Dialog: don't show two radio protocol combo box when CW/Other is unchecked (K3CT) (Coded by N1MM)
Configuration Dialog: performed minor aligment of controls (K1XM) (Coded by N1MM)
Force OTRSP to use 9600,N,8,1 for communication (K1XM) (Coded by N1MM)
Prevent runtime error in GridFromLatLong (Coded by VE3NCQ)
Catch runtime errors in GridFromLatLong (Coded by N1MM)
Bug # 175: Allow function keys F9 – F12 to be selected in Configurer, Function Keys tab F-key selectors. Add a disable feature to the QSO B4 and AGN selectors. When “Disable” is selected, ESM will not use the disabled function key. Note: If these new selection options are used they will have to be reselected if the user switches to an older program version. (K1TTT) (coded by K3CT)
Bug # 288: Holyland contest should combine RTTY and PSK into a digital mode. (4Z5CP) (coded by K3CT)
Bug # 295: FL QSO Party: Change Cabrillo contest name. (WD4AHZ) (coded by K3CT)
Bug # 361: Can’t stop the “Missing Master.DTA file” warning messages when using RTTY and the Master.DTA file is missing. (K5WW) (coded by K3CT)
Bug: WAE QTC serial numbers should be formatted with the same cut number format as the QSO exchange. (W9KB) (coded by K3CT)
Bug: Display the Multiplier, Other, “Set Grid Square Center” menu only for grid square contests. (coded by K3CT)
Bug: TX & NM QSO parties: Update section table and merge RTTY & PSK. (coded by K3CT)
Bug: CO QSO party: Correct scoring when in-state stations work DX. (coded by K3CT)
Bug: WI and WV QSO parties: Correct the scoring. (coded by K3CT)
Bug: PA, WI and WV QSO parties: Change or edit the state section table. (coded by K3CT)
Bug: KS QSO party: Correct the column error in the Cabrillo output. (W0BH) (coded by K3CT)
Bug: AR, KS, and WV QSO parties: Correct the rules links. (coded by K3CT)
Bug: IA, NY, and PA QSO parties: State multiplier logic incorrectly counted sections with more than two characters. (coded by K3CT)
Enhancement: Add KS, SC, WA, VA, WV QSO party bonus points, correct NM bonus logic. (coded by K3CT)
Enhancement: Add a bonus call/QSO/point summary in the Score Summary file output and make improvements to the QSO party bonus code. (coded by K3CT)
Enhancement: WI and WV QSO parties: Added state multiplier logic for in-state users. (coded by K3CT)
Enhancement: PA QSO party: Added the ability to input multiple bonus station callsigns. Prevent the in-state users from logging EPA or WPA sections because the code automatically counts these multipliers. (coded by K3CT)
Enhancement: For QSO party contests, users can right click on the county in the Multiplier, “Other” display and “Show Calls Worked” for the selected county. (coded by K3CT)
Enhancement: Add a digital mode display column in the Multiplier window for mixed mode digital. Until this change is tested by more users it is only enabled for the CO QSO party. Improve the efficiency of the Multiplier window code. (coded by K3CT)

Version 9.8.3 (Started August 10, 2009)
Bug 359 - In IARU score summary, break out HQ and Zone multipliers. (PC5A and others) (coded by N2IC).
Added OTRSP (Open Two Radio Switching Protocol) (K1XM) (Coded by N1MM)
Bug 373 - Disable quick edit while sending QTCs (W1EBI) (Coded by N1MM)
YOHFDX: New rules - you can work the same station twice on the same band: CW and SSB (N2YO) (Coded by NA3M)

Version 9.8.1 (Started August 3, 2009) -- Download
Changed problem report sender's address from tfwagner@snet.net to the user's own address (Coded by VE3NCQ)
Improved error handling of problem report email (Coded by VE3NCQ)
Added < > around email addresses to keep some SMTP servers happy. (Coded by VE3NCQ)
Bug 365 - When not interfaced to a radio, log the QSO as the bottom band edge, except for contest types "DX" and "VHFDX". (coded by N2IC).
Bug 342 - Remove population of grid square field using packet spot comment (many) (coded by N2IC).

Version 9.8.0 (Started July 28, 2009) -- Download
Users please test the QSO party contests that changed in the last two releases and report implementation errors. Be sure to test as in state and out of state participants.
Enhancement: Add the IA QSO party. (coded by K3CT)
Enhancement: Update the KS, CO, and HI QSO parties. (coded by K3CT)
Enhancement: Expand the Name field slightly in all QSO parties that exchange name. (coded by K3CT)
Enhancement: Implement bonus point logic for the following QSO parties: HI, IA, PA, and TN. (coded by K3CT)
Enhancement: Change the Summary window multiplier column used in several QSO parties from N/A to Mul. (coded by K3CT)
Enhancement: Add program logic to allow the merging of (RTTY & PSK) or (CW, RTTY, PSK) into one contest mode. Applied to: ARRL FD, ARRL RTTY and the following QSO parties: AR, AZ, CO, KS, MD, TN, VA, 7QP, OH, IA, MN, NEWE, NY. (several) (coded by N1MM, N2AMG, K3CT)
Enhancement: Cabrillo mode export string for PSK is “PK” unless contest merges RTTY and PSK into a digital mode. When this occurs the mode export string is “RY”. (coded by N2AMG, K3CT)
Bug: Remove the band change timer in multi-mode for NEWE QSO party. (K1TTT) (coded by K3CT)
Bug: Correct the multiplier Once Per Mode logic. (coded by K3CT)
Bug: Remove the DC section multiplier in NEWE QSO party. (K1TTT) (coded by K3CT)
Bug: Change the state section table for NEWE, CO, HI, and TN QSO parties. (coded by K3CT)
Bug: Change the OH QSO party scoring and updated the rules link. (K2KW) (coded by K3CT)
Bug: NAQP doesn’t show XE and other NA mults in the Log window. (K5WA) (coded by K3CT)
Gives warning and disables Finding calls in Garbage if Master.dta file can't be found (Coded by N2AMG)
Minor adjustments to the way MMTTY is loaded (Note: if you have Give MMTTY Help Checked please uncheck it and try re-loading MMTTY Report what happens.) (Coded by N2AMG)

Version 9.7.2 (Started July 19, 2009)
Fix runtime error when ">" occurs at the end of a packet comment (K5WW) (Coded by N1MM)
Bug: Added the AZ and NY QSO parties. (coded by K3CT)
Bug: Changed the scoring in the KS, SC, OH, and SD QSO parties. (coded by K3CT)
Bug: Changed the Mult display for VI & PR in the PA QSO party. (coded by K3CT)
Bug: Added state multiplier detection for in-state users in the AL, KS, PA, and CA QSO parties. (coded by K3CT)
Bug: For in-state users, changed the color of the callsign is blue until the exchange is added in all QSO parties. (coded by N1MM & K3CT)
Bug: Changed the multiplier or how DX is handled in the CA, NJ, OH, MI, and KS QSO parties. (coded by K3CT)
Bug: Don’t confuse DX calls like (OK2XX) as an OH state multiplier in all QSO parties. (coded by K3CT)
Bug: Changed the Cabrillo output for the AL and ON QSO parties. (coded by K3CT)
Enhancement: Added a status warning message when attempting to log a callsign with /R or /COUNTY in the following QSO parties: AL, NY, AZ, PA, NJ, OH, KS, CA, and MI. (coded by K3CT)
Bug: Changed the state/VE section table for the KS, MI, NJ, AL and OH QSO parties. (coded by K3CT)
Bug: Changed the county table for the AL, KS, and PA QSO parties. (coded by K3CT)
Bug: Changed when the radio interface polling timeout is suspended when spotting a station. (coded by K3CT)
Bug Fix: AA DX - should not add points for my country QSO (UA9KW) (coded by NA3M)
Bug Fix: RRTC(Team) - did not show double (green color) multiplier (RA3TT) (coded by NA3M)

Version 9.7.1 (Started July 14, 2009)
Corrects an issue of Setting MMTTY port to NONE causing the FSK Settings being lost.
(FSK Settings will need to be reconfigured in MMTTY as they were cleared in the last version) (Coded by N2AMG)

Version 9.7.0 (Started June 25, 2009)
Enhanced the warning when disabling multi-user to recommend using 'Prevent Automatic Reconnect Attempts' for non-working computers (Coded by N1MM)
Adds error check to Main config on Exit to see if there is a Digital window associated with each digital port (Coded by N2AMG)
Corrects an issue with MMTTY losing the port setting when using FSK and switching between modes. (Coded by N2AMG)
Enhancement: New contests added: UNDXC, RRTC, VHFCFO (coded by NA3M)
Bug Fix: ARIDX - prefilling serial number removed (N2QT) (coded by NA3M)
Bug Fix: UKRAINDIGI - PSK(PK) mode in Cabrillo (RV4HL) (coded by NA3M)
Enhancement: Command TOUR added for resetting dupe check start time (coded by NA3M)

Version 9.6.3 (Started June 19, 2009)

If you use this version for FD, be sure to bring a prior, known good version as well. This version has a fix for FD that only is needed if you plan to run multiple digital modes on the same band during FD. Consider this version experimental for FD.

Fix runtime error when no cw port is defined (Coded by N1MM)
Bug 341 - In an SO2R configuration, new mults were not shown in the correct color on the S&P Entry Window while CQing on the Run Entry Window. (Coded by N2IC)
Bug 336 - Clicking in available window selects wrong spot when multiple spots are on the same frequency (K1MK) (coded by N2IC).
Feature 181: LOTW & CQ 160 - replace "your_state_abbrev" with state from station dialog. (K1TTT) (Coded by N1MM)
Bug 276: GA QSO Party was giving mults for dx contacts. (W4BQF) (Coded by N1MM)
FD: treat all digital modes as one mode for dupe checking purposes (Coded by NA3M)

Version 9.6.2 (Started June 12, 2009)
Adds Next Call Function Key setting to the Function Key tab of the Main Config area.
To be used to designate what Function Key holds the {LOGTHENPOP} Macro. (Coded by N2AMG)
Changes ESM flow when there is a Callsign stacked on the callstack to to use the Next Call Function Key
setup in the configurer automatically instead of the TU Key(F3). (Coded by N2AMG)
Bug #318: File, Open window titles are wrong after exporting function keys. (K5WW) (coded by K3CT)
Enhancement: Allow importing beacon files with frequencies in US or EU format (50000.25 or 50000,25). (PA5DD) (coded by K3CT)
Bug: IC-746Pro doesn't decode USB-D/LSB-D correctly in version 9.6.1. (K5WW) (coded by K3CT)

Version 9.6.1 (Started June 6, 2009)
Enhancement: Consolidate all radio digital modes into RTTY, RTTY-R, PSK, PSK-R, AFSK, and AFSK-R. The radio mode / digital mode matrix has been posted on the reflector. Users will need to select the proper digital radio modes for RTTY and PSK after upgrading. (N2AMG, W4TV) (coded by K3CT)
Enhancement: Modify Configurer, Mode tab to display allowable digital radio modes for the selected radio(s). (coded by K3CT)
Enhancement: Remove the Configurer, Mode tab, “Don’t Change Mode” button and add it into the digital radio mode selectors for RTTY & PSK. (coded by K3CT)
Enhancement: Add the selected the RTTY & PSK modes into the mode selections made when clicking on the Bandmap mode button. Note, due to the Kenwood and Icom radio groupings, some Bandmap mode button clicks may not change the radio mode. (coded by K3CT)
Enhancement: Check for allowable RTTY/PSK mode selections on Configurer exit. Notify the user if an error has been made. (coded by K3CT)
Enhancement: Add CW-R to the FT-847 radio control. (coded by K3CT)
Enhancement: Implement USB-D / LSB-D digital modes for the IC7800, IC7700, IC7600, IC756Pro3, IC756Pro2, and IC746Pro. (W4TV) (coded by K3CT)
Enhancement: Implement K3 digital radio modes. (VE3KI) (coded by K3CT)
Bug #179, #263: QSO’s/Mults displayed at the bottom of the Entry window are not updated when contacts are logged in the right Entry window. (KK1X, VE3CX) (coded by K3CT)
Bug: Corrected the IC-910 FM mode command. Users please test and confirm the fix. (coded by K3CT)
Bug: When the contest changes to a RTTY contest, change the radio mode. (coded by N2AMG)
Enhancement: Make the Configurer, mode tab, digital radio RTTY/PSK mode programmable for each radio (SO2R) or VFO (SO2V). Save the digital mode selections in the *.INI file. (coded by N2AMG)
Bug: Corrects CW Xmit Dot from highlighting during transmit (Coded by N2AMG)
Enhancement: Makes each Digital window operate independently from each other.(Allows for DI2 to be loaded when DI1 is not) (Coded by N2AMG)
Enhancement: Allows creating 4 additional RX Windows for use with either DI and can use MMTTY or TNC in any combination.
This allows for using multiple MMTTY profiles or TNC's copying the same audio stream.
It is best to create 4 different MMTTY directories for profiles and window settings to be saved. (Coded by N2AMG)
Bug: Correctly disables Digital port when CW port is on the same port and the user types CW or SSB in the Entry Window This should work on all systems now for leaving the DI's open when doing CW or SSB (Coded by N2AMG)
Enhancement: Allows for 4 choices of MMTTY window type display (Chosen in Digital setup) (Coded by N2AMG)

Version 9.6.0 (Started June 1, 2009)
Bug 317 - Improve Winkey on-the-fly call correction (K1XM) (coded by N2IC).
Bug 230 - Allow NL, VO1, VO2, NF and LB to be entered for Newfoundland/Labrador in NAQP (K1MK) (coded by N2IC).
Bug 313 - Sprint SO2R focus issues. A new end macro, {CONDJUMP} has been added. Typical usage in Sprint is:
Run F3: TU {END} {COMDJUMP} .
Operation of {COMDJUMP}:
When RX and TX focus are split between two radios, and the user hits the Enter key, TX focus is first moved to the radio with RX focus. The CW message is sent. After the CW message has been completed, TX and RX focus are both moved to the other radio. When RX and TX focus are not split between radios, and the user hits the Enter key, the CW message is sent. When the CW message has been completed, TX and RX focus remain unchanged. (W4NZ, N4OGW) (coded by N2IC).

Version 9.5.1 (Started May 15, 2009)
Bug #285 - serial number gets reserved only when space/tab is entered in S&P, Multi User mode. (Coded by NA3M, N2IC)
Feature #227 Mark spots with "#" in spotter's callsign as skimmer spot in the bandmaps and available window. If spotter's callsign contains your (Station dialog) callsign, then mark with "!". If it does not, mark with "#". In the available window the marking shows in the direction column. You may need to widen that column in order to see it. It may end up in another column depending on user reaction. (W3OA, N4ZR) (Coded by N1MM)
Changes name of EUAreacodes.sec file to EUAreacds.sec to match what is coded in Logger (Coded by N2AMG)
Removes erronious blank lines from EUAreacds.sec file for correct operation (Coded by N2AMG)
Corrects error that was stopping display of EUArea codes in multiplier window for EU-PSK-DX Contest (Coded by N2AMG)
Enhancement: Add Spanish Towns contest (CME) (EA4KA), (coded by EA7GV)

Version 9.5.0 (Started May 1, 2009)

*** Manual reload of QSOPARTY.SEc required for New England QSO Party!

Several minor bug were fixed today for new contest UA1DZ Memorial Cup (DZCUP). Please disregard my previose email with attached files.
Enhancement: Add UA1DZ Memorial Cup (DZCUP) contest, (coded by NA3M) Minor bug fixes for RF Championship contest (K3CT), (coded by NA3M)
Corrects BARTG Spring Contest start of contest date calculation (Coded by N2AMG)
EARTTY Moves Recieved # next to Sent # in log (Coded by N2AMG)
Corrects Second Entry Window red transmit indicator from being highlighted when switching to it when in digital (Coded by N2AMG)
Corrects Issue when using 2 entry windows and one DI and macro buttons being sent to wrong radio (Coded by N2AMG)
Corrects issue of Callstacking getting out of synce after last call cleared from stack (Coded by N2AMG)
Corrects issue of Digital SO2R calstacking using First one wins and not allowing chaining of F-Keys to function. (Coded by N2AMG)
Bug: Trap wl_cty.dat file date check error generated during database load caused by Windows regional date/time selections. (IK0HBN) (coded by K3CT)
Bug #282: File, Copy This Contest to Another Database does not copy QSO Party contests correctly. (K8JQ) (coded by K3CT)
Enhancement: Change the K3 radio timing to improve responsiveness and the MIC Mute faster. (N1EU) (coded by K3CT)
Enhancement: Prevent users selecting File, Copy This Contest to Another Database and then select the current database. (coded by K3CT)
Bug: Corrected the NEQP county abbreviations. (AD1L) (coded by K3CT)

Version 9.4.2 (Started April 22, 2009)
Bug #285 - serial number gets reserved only when space/tab is entered in S&P, Multi User mode. (Coded by NA3M)
Bug 287 - 7QP did not allow 7th call area stations to log NM QSO's. (K7IA) (coded by N2IC)

Version 9.4.1 (Started April 11, 2009)
Fix runtime error when Ctl-T is pressed with no cw port defined (E71DX)
Bug 274 - Fix 7QP scoring for digital contacts. (Coded by N2IC)
Bug 126 - Round off {PASS n} to nearest kHz (K5KA) (coded by N2IC).
Bug 229 - Insert space between each sent, stacked CW macro (VE1DT) (coded by N2IC).
******** NOTE - TRANSACTION FILE EXTENSION HAS CHANGED ********
Bug 280 - Change name of transaction (recovery) file from .LOG to .TRN to reduce user confusion (N2IC) (coded by N2IC).
Bug #174: Function key file not loading when File, Open, numbered list is used. (K1EP) (coded by K3CT)
Bug #267: Can not program K3 filter command strings that contain a space. (F5VNB) (coded by K3CT)
Bug #269: LZ Open, incoming spots on bands other than 80m/40m cause the Info window status line to change often erasing the last worked time display. (W4BQF) (coded by K3CT)
Bug #270: SPDX contest outside SP, Bandmap & Available window spots have the wrong color. (E71DX) (coded by K3CT)
Bug #271: When in Quick Edit mode, using WIPE instead of Esc to exit, causes odd behavior. (K7QQ) (coded by K3CT)
Bug #278: Omni VII, Jupiter, and Argonaut the radio command terminator character can appear in the frequency string. (G0MLY) (coded by K3CT)
Bug #279: After importing a country file with the computer set to UTC and regional settings to 24 hour, the program produces a runtime error on subsequent program restarts. (KP2HC) (coded by N1MM)
Bug: Correct the IC-7700 PSK radio command string. (W4BQF) (coded by K3CT)
Enhancement: Exit the K3 radio routine gracefully when the users USB to COM converter goes to sleep. (coded by K3CT)
Enhancement: Change Log Times, improve user input and trap non-integer input. (coded by K3CT)
Enhancement: View, Off-Time report, detect logs with pre-contest QSO’s that cause the report to be incorrect and add a warning in the report output. (coded by K3CT)
CWJFMM: Corrected scoring (please check all scoring) (PY8AZT)

Version 9.4.0 (Started April 1, 2009)
Fix runtime error when Ctl-T is pressed with no cw port defined (E71DX)
Bug 268: Multi state QSO party - Out of State message incorrect (K1MLR) (coded by N2IC).
Bug #212: A single click on spots in Packet/Telnet window doesn’t always put the call into the Entry window, callsign also missing from the Bandmap. Add a status message in the Entry window when a user clicks on a filtered spot. (DK8NT) (coded by K3CT)
Bug #266: The FT-920 radio control issues in SO2R when configured as right radio. (WA2MCR) (coded by K3CT)
Bug Fix: Disable state selector on File, Open Log in Database for QSO party contests. (coded by K3CT)
Bug Fix: When changing user programmable radio filter codes, the edit window does not display multiple Icom command strings. (K8UT) (coded by K3CT)
Bug Fix: In SO2V mode with RX focus on VFOB & TX focus on VFOA, the {WIPE} macro doesn’t function correctly. (coded by K3CT)
Enhancement: Configurer, Mode Control tab add PSK mode association to the PSK dropdown menu and detect PSK/PSK-R modes for IC-7800, IC-7700, IC-7600. IC-7700 radio untested due to lack of radio tester.
Enhancement: Add PSK mode to the Bandmap mode selector for Manual Radio, IC-7800, IC-7700, IC-7600. (coded by K3CT)
Enhancement: Disable Bandmap radio filter edit options for Manual Radio. (coded by K3CT)
Enhancement: Organize the menu selections in the Packet/Telnet filter menu. (DK8NT) (coded by K3CT)
Corrects Issue of Dueling CQ's would not function when using MMVARI (Coded by N2AMG)
Corrects issue of Dueling CQ Timer not functions when using the Digital Interfaces (Coded by N2AMG)
Corrects issues of TNC's not working correctly in the second DI (Coded by N2AMG)
Changes TNC code to detect command prompts to give more accurate detection when TNC stops sending. (Coded by N2AMG)
Enhancement: Add RF Championship (RFCHAMP) contest. (coded by NA3M)
Bug Fix: Oblast.sec file problem for UA2 area. (coded by NA3M)
Bug 272 - WPX - Multi-computer - Serial number jumps to 0 (K1TTT, 9A3OS, ZL4NR) (coded by N2IC).

Version 9.3.7 (Started March 29, 2009)
Bug #260: A runtime error occurs when loading a database with US Windows regional settings created with German regional settings. (DK8NT) (coded by K3CT)
Bug #254: Manual radio (no radio) updates: save mode for program restart, add AM/FM modes when the mode label is clicked in the Bandmap, detect mode when using the File Open numbered database list for single mode contests. (PH2M, N5RA, NU6T) (coded by K3CT)
Bug Fix: Bandmap right click with Manual radio, Go to Top of Band isn’t correct when the mode is FM and the band is 2 meters. (PH2M) (coded by K3CT)
Bug Fix: Bandmap right click when mode is RTTY/PSK, Go to Top of Band isn’t correct when digital sub-band table is blank. (coded by K3CT)
Bug Fix: When previous spots are listed with SH/DX, don’t place the station callsign in the Bandmap preventing it from popping into the Entry window. (coded by K3CT)
Bug #259 - QSO's not logged if SO2R, SSB and Run F3 or S&P F2 are blank (W4AU) (coded by N2IC).
Bug 256 - In Russian DX Contest, don't prefill number from other bands (coded by N2IC)

Version 9.3.5 (Started March 19, 2009)
RSGB160: Was crashing and now it runs fine (Coded by PA1M)
PABEKER: Own section now also a multiplier (PC7T) (Coded by PA1M)
Improve wording of spot filter description. Use error symbol if no bands selected.
When using {LOGTHENGRAB} and there is no callsigns left in grab window just exit sending routine(Coded by N2AMG)
Corrects issue where DigitalSO2R Lockout was not functioning. (Coded by N2AMG)

Version 9.3.4 (Started March 18, 2009)
Bug Fix: Reversed the change made in 9.3.3 to correct the /FREQ, Enter Entry window command for Icom radios until a better solution is developed. (coded by K3CT)
Bug Fix: For M/S, fix Run/Mult status message. (coded by K3CT)

Version 9.3.3 (Started March 14, 2009)
Bug # 194 Show mult status on Russian stations as soon as one char of suffix is entered (9A3OS)
Bug Fix: (Issue #247) “Can't find default for…” error message in M/S when Ctrl+Alt+M is entered. (9A3OS) (coded by K3CT)
Bug Fix: For M/S, fix Run/Mult status message. (coded by K3CT)
Bug Fix: For M2, reduce the Station1/2 prompts to one at program start, correct the Run1/2 Configurer checkmark to agree with startup prompt response, Ctrl+Alt+M did not respond after program start at times, and change Info window to display Run1 / Run2. (coded by K3CT)
Bug Fix: Disable VFOB frequency entry for SO1V for the /FREQ, Enter Entry window command. (coded by K3CT)
Bug Fix: Correct the /FREQ, Enter Entry window command for Icom radios. (coded by K3CT)
Bug Fix: Remove the /FREQ, Ctrl+Enter Entry window command that wasn’t executed since the Ctrl+Fx code was added. (coded by K3CT)
Bug Fix: Extend the radio interface timeout during multi-station startup and when the “Can’t log station because of non-Mult” prompt is displayed. (coded by K3CT)
Bug Fix: Change program so that Entry window 0, Ctrl+Enter clears split. The primary purpose for this command is to set split. This was not changed. See the manual for additional information. (coded by K3CT)
Feature Request: (Issue #238) Add Bandmap menu option to clear spots on current band only. Users should right click in the Bandmap and note the new menu options. (W7ZR) (coded by K3CT)

Version 9.3.2 (Started March 13, 2009)
Bug # 244 ND QSO Party missing (K0RC) (coded by N2IC)
Bug # 245 Correct typos and other errors in QSOParty.sec (K0RC) (coded by N2IC)

Version 9.3.1 (Started March 11, 2009)
Issue 242 - Added support for Idaho QSO Party (coded by N2IC)
Minor tweaks for NM & MN QSO Parties (Coded by N2IC)
Bug 241 - RSGB Commonwealth Contest, program does not allow logging of VE, VO, VY, VK1-8, ZL1-6 and ZS1-6 (ZL2BR) (fixed by N2IC)

Version 9.3.0 (Started March 1, 2009)
Fix internationalization of multiuser boolean in com port settings (IZ2LSC)
ND QSO Party: change abbreviations in QSOParty.sec to 3 letters each (K0RC)
Fix internationalization issue in checking for new cty.dat file (K3NA)
Corrects Run-Time error when trying to transmit from second entry window when using 2 EW's and 1 DI (Coded by N2AMG)
Corrects issue where callsign color in rx window did not change color after being logged (Coded by N2AMG)
Lowers time out when tring to kick MMTTY started and adds additional safegards for hanging in loop (Coded by N2AMG)
Bug #209 - State pre-fill for DX side in ARRL DX is incorrect (PC5M) (coded by N2IC)
Bug #216 - Import goals does not recognize band when radio on 160m (K1TTT) (coded by N2IC)
Bug #219 - Wrong spot selected when clicking on adjacent spots in Bandmap (N4ZR) (coded by N2IC)
Bug #234 - Band change counter wrong for ARRL DX M/2 (N3RD) (coded by N2IC)
Bug #237 - VA QSO Party - Cabrillo Incorrect (W4AU) (coded by N2IC)
Bug Fix: (Issue# 0196) LZOpen 40m/80m ignore the band change when computing the 30 minute rule. (LZ2BE) (coded by K3CT)
Bug Fix: (Issue# 0195) The Tools, Program Execution Logging and Multiop, MultiopTools checkmarks do not track in the EntryWindows. (coded by K3CT/N1MM)
Enhancement: (Issue# 0151) Enable the Mute Mic feature in Configurer, Other tab for the K3 radio. (N1EU) (coded by K3CT)
Enhancement: (Issue# 0197) Increase the maximum calls displayed in the Visible Dupe Sheet to 600. Depending on computer speed and configuration, users may experience noticeable delays when using the Visible Dupe Sheet with logs containing more than 300 calls. Performance with 600 callsigns is acceptable with a 2.6 GHz computer running only Logger. (several) (coded by K3CT)
Bug Fix: View, Unique Calls not in Master.dta produces a Run-Time Error when the Check window is not open. (coded by K3CT)
Bug Fix: (Issue# 0220 & 221) Prevent the station callsign from appearing in the Bandmap Window and never moved to the call frame or callsign box when running. (coded by K3CT)
Enhancement: For manual radio users (no radio control) set the mode and frequency when the program starts or a new contest is opened with the correct mode (single mode contests only). The program uses information from the contest selection and the mode tab settings in Configurer. (testing by S57AD) (coded by K3CT)
Enhancement: (Issue# 0218) Add the ability to right click on callsigns in Available window and send the spot to the inactive VFO (SO2V) or radio (SO2R) without changing Entry window focus. Correct operation in SO2V mode is radio dependent. It is enabled in the Available window menu. The default is disabled. The keyboard command CTRL+Shift+Up/DnArrow is identical but it steps through the Bandmap. (K1TTT) (coded by K3CT)
Bug Fix: (Issue# 0235) K3 radio toggled SUB on/off when SWT was enabled. (K3IU) (coded by K3CT)

Version 9.2.5 (Started February 25, 2009)
Fix logic on PU calls not on 20m cw to prevent warnings. (K1KI) (coded by K1TTT)
Add j7 to the 1x1 short call list (J7N) to prevent warnings. (coded by K1TTT)
Fix internationalization of booleans in com port settings (IZ2LSC)
Restore multi-user warning about turning off multi-user (Coded by N2IC)
Adds setting to Digital Setup to Turn added code for MMTTY kick-starts off and on (Coded by N2AMG)
Refined MMTTY Kick Start code so not to get stuck in loop and lowers number of tries before failing (Coded by N2AMG)
Revised Tuning Tolerence code to use Active.RadioMode if CurrentContest.ContactMode is null (Coded by N2AMG)
Corrects MMVARI Start transmit of text delay (Coded by N2AMG)

Version 9.2.4 (Started February 20, 2009)
Packet: SH/DX LU1HLH/D causes error message (K1TTT)

Version 9.2.3 (Started February 16, 2009)
CQWPX: Back out change to scoring due to error in published rules
ND QSO Party: Added contest (N9OH)

Version 9.2.2 (Started February 11, 2009)
Correct error message when there are no files in letters path.
Update the default radio address for the IC-7600. (coded by K3CT)
CQWPX RTTY bug fix(ID #213): Scoring 2 points for contacts with same country on 40m & 80m. Should be 1 point for same country regardless of band (N3QW) (Coded by K1MK)
bug fix (ID #193): Available window updating erratically (VE1DT) (Coded by K1MK)
bug fix: (ID #207): Info window not updating (K4AB) (Coded by K1MK)
bug fix (ID #210): Problem clicking on spots in Available window when non-USA Windows Regional preferences set (DK8NT) (Coded by K1MK)

Version 9.2.1 (Started February 1, 2009)
FOC: Fix continent bonus, add 5 & 6 band bonus (W1EBI)
Bug fix 188: With call history lookup enabled, bearing shown in entry window changes to incorrect value when tab or space pressed (W2WG, K1ZZI) (Coded by K1MK)

Version 9.2.0 (Started February 1, 2009)
Eliminate runtime error when canceling after deleting a contest (G4LMW)
Corrects Object Doesn't support this property error message when opening second DI (Coded by N2AMG)

Version 9.1.6 (Started February 1, 2009)
Bug Fix: Edit CW/SSB/Digital F-Keys edited in one EntryWindow were not updated in the other EntryWindow. Imported F-Keys files were not updated in both Entry Windows. (several) (coded by K3CT)
Bug fix 188: Bearing & Info issues (coded by K1MK)
Buf fix 190: Available Window Mult Colors Wrong (coded by K1MK)
Adds more tries to the MMTTY initialization routine (Coded by N2AMG)
Does not add callsign to Grab window if your call is contained in it. (Coded by N2AMG)

Version 9.1.5 (Started January 28, 2009)
Corrects F-Keys not functioning when in PSK-125 Mode when using MMVari (Coded by N2AMG)
Bugfix: Ten-minute timer in Info window disappears after Entry window is minimized (9A3OS) (Coded by K1MK)

Version 9.1.4 (Started January 27, 2009)
Prevent error when starting/stopping multiuser mode from 2nd entry window (K3CT)
Bugfix: With both DIs open and call history enabled, US call signs that are not multipliers are being colored as mults. (K1SFA) (coded by K1MK)
bugfix: Input from Latitude & Longitude boxes on Station configuration form not internationalized. (DL2KWW) (Coded by K1MK)
bugfix: Ten-minute timer in Info window disappears after Entry window is minimized (9A3OS) (Coded by K1MK)

Version 9.1.3 (Started January 22, 2009)
Bug fix: With call history lookup enabled, bearing shown in entry window changes to incorrect value when tab or space pressed (W2WG,K1ZZI) (Coded by K1MK)
Enhancement: Increase font size for band change counter and timer in the Info window. Added a "stop light" (red/yellow/green) colored background to band change timer (YB0ECT) (Coded by K1MK)
Bug fix: Error 9 at startup (K1TTT) (Coded by K1MK)
Bug fix: pass frequency should not time out (K1TTT) (Coded by K1MK)
BARTG Sprint: Don't show a band change timer in the Info window for multi-ops in this contest (K1TTT) (Coded by K1MK)
VHF contests: Do not show a band change counter or timer in Info window for multi-ops (K1TTT) (Coded by K1MK)

Version 9.1.2 (Started January 17, 2009)
BARTG RTTY Sprint & BARTG Spring RTTY: Highlight needed W,VE,JA,VK call area mults in bandmap and available window (Coded by K1MK)
BARTG RTTY Sprint & BARTG Spring RTTY: Added EXPERT to list of overlay categories choices. The EXPERT overlay category must be selected for the 5 minute band change counter to not be active for SINGLE-OP (K1MK)
Bug fix: Info Window shows the wrong description for spot (K4AB) (coded by K1MK)
Bug fix: Fix Error 9 & Error 91 on start-up (code by K1MK)
Enhancement: Added OTHERBAND (e.g. 80) and OTHERMHZ (e.g. 3.5, 3R5 on CW) macros for SO2V/SO2R (coded by K1MK)
Enhancement: Added OTHERFREQCUT macro for use on CW. Sends last digits of the frequency of the other (inactive) VFO/radio as cut numbers; uses the cut number style selected in Configurer. (coded by K1MK)
Bug fix: Assign correct multiplier status to re-loaded spots upon restart (Coded by K1MK)

Version 9.1.1 (Started January 17, 2009)
Set Winkey weight on startup (K1ZZI)
Adds QSY Clears Grab window setting to Digital setup screen (Coded by N2AMG)
Changes Tuning Tolerance function to use Current Contact Mode instead of Active Radio Mode (Coded by N2AMG)
Corrects Esc not functioning at times on DI2 in SO1V and SO2V setting (Coded by N2AMG)
Corrects AutotxOffset not clearing when tunred off (Coded by N2AMG)
Adds indication when DI's are transmitting (TX button will turn red) (Coded by N2AMG)
Adds setting to Digital setup to set Non Master.dta call colors when using Master.dta call highlighting (Coded by N2AMG)
Adds new settings to Digital setup If QSY Wipes and Spot call is checked then Clear grab window on wipe of callsign(Coded by N2AMG)
Adds test code to try and correct MMTTY from not initializing (Coded by K1MK/N2AMG)
Enhancement: If the database name entered during File, Open is not found, display a message box and return gracefully to the program. (coded by K3CT)

Version 8.12.9 (Started December 30, 2008)
NM QSO Party: added support (coded by N2IC)
Added "LastVersionExecuted" to "Other" section of ini file.
Enhancement: Added Kenwood-Slow radio option and code changes to accommodate the older Kenwood radios with the EPROM with polling issues. (RA6YDX & N1MM) (coded by K3CT)
Enhancement: Updated the K3 code for SO2V and second receiver functionality. The single receiver K3 can not be used in SO2V mode due to firmware limitations. See the Supported Radio section of the manual for other K3 specific information after the manual update. (coded by K3CT)
Bug fix: SO2V fix of ALT+F5 & ALT+F6 operation for Icom, K3, and other radios. (coded by K3CT)
Bug fix: Changed the ALT+F7 text to include a clear split message. (K1EP) (coded by K3CT)
Bug fix: When CTRL+SHIFT+Up is pressed with a callsign in the active Entry window, the callsign is highlighted. Doesn’t occur when CTRL+SHIFT+Dn is pressed. (K1EP) (coded by K3CT)
Bug fix: In SO2V mode when the transmit focus needs to change before sending a CW message, the CW starts before the radio has finished switching VFO’s. (K2AV) (coded by K3CT)
Bug fix: In SO2V mode when the Configurer, “Dual Rx always on” is modified, change the checkmark in the other Entry window menu and display the status message in both Entry windows. (K2AV) (coded by K3CT)
HSCCW: Own country not greyed out in bandmap anymore (DM1TT) (Coded by PA1M)
Improvements to implementation of the MULTI-ONE category. Please give the MULTI-ONE category a thorough work out in contests of interest and provide feedback on any outstanding issues regarding band change counter, timer, work only mults, etc. (Coded by K1MK)
Extract mode, state/section, grid from comments on incoming spots (Coded by K1MK)
Added macros for use in 'Comment For All Spots' (in Telnet/Packet window). The macros {GRIDSQUARE}, {MODE}, {ZONE} and {QTH} (for state/province/section/oblast/other) have been implemented (F0862) (Coded by K1MK)
bug fix: Importing goals from a plain text file (Coded by K1MK)
Use grid square from Call History file or in spot comment to calculate bearing reported in bandmap, avaiable window, info window and entry window (F0118) (coded by K1MK)
Improve restart time and responsiveness during spot reload when a large number of spots are present (Coded by K1MK
In Station Information dialog, contents of the Latitude & Longitude fields update when the Grid Square field is changed and vice versa. (Coded by K1MK)
ARRL RTTY RU: Do not log K/VE with an exchnage of "0" (Coded by K1MK)
ARRL RTTY RU: Change ADIF tag from SECTION to STATE (W1RZF) (Coded by K1MK)
ARRL RTTY RU: Pre-fill exchange with state/prov if present in spot comment (coded by K1MK)
ARRL RTTY RU: Only pre-fill exchange from previous log entry if K/VE; do not pre-fill serial number for DX (K1TTT) (Coded by K1MK)
Don't broadcast Radio2 info if SO1V (KF3B)
NAQP bugfix: Filled-in state/province becomes invalid on focus change (W1UE, W4NZ) (Coded by K1MK)
NAQP bugfix: State/province aliases incorrectly being applied to non-states (i.e. VI being changed to VA for KP2) (K0RC) (coded by K1MK)>
NAQP bugfix: Spots for needed non-USA mults (i.e. VE, XE) not being shown in red in the bandmap/available windows (N2IC) (coded by K1MK)
NAQP bugfix: Not pre-filling state/province for VE, KL, KH6 when call is not in Call History file or Call History lookup is not enable (K1MK) (coded by K1MK)

Version 8.12.7 (Started December 27, 2008)
Changed minimum normal transceiver timeout time to 5 seconds
Bug fix: The status message after updating the call history displays a QSO count that is one less than actual. (K2DSL) (coded by K3CT)
Set the radio mode to CW/CW-R when Tools, Tune to Beacon for this band is selected. (coded by K3CT)
Bug fix: Changed the K3 and Kenwood radio interface timeout to be more robust. (KA1IOR) (coded by K3CT)
RAC: Correct start date/times for Canada Day and Winter contests (VE1DT) (Coded by K1MK)
RAC: Pre-fill province from Call History (if enabled) and from VE prefix (K8JQ) (Coded by K1MK)
Increase the robustness of deducing subdivision (state, province, oblast) from callsigns (Coded by K1MK)
Bug fix: #1025 Reset Rx when running split is not working when in ESM with FT-1000MP. In addition to fixing the bug, enabled the reset of Rx frequency when the {LOG} macro is used, when LogIt is clicked, when CTRL+ALT+ENTER is used to log a QSO. Also, changed the Configurer text wording for this feature and prevented the Rx frequency from being reset when a logging error occurs. (PC5M) (coded by K3CT)

Version 8.12.6 (Started December 23, 2008)
Bug fix: Several bug fixes relating to the CQ F-key message identification. The program now uses the CQ key defined in Configurer, Function Key tab. In cases where users desire more than one CQ F-key, include the new {CQ} macro which identifies the F-key as an additional CQ F-key. The following issues are fixed. The program switches to run all the time when the voice files are stored in a directory containing “CQ”. The program will not switch to run unless certain F-Key label or F-Key text rules are followed. The program switches to run all the time when a station callsign is sent starting with “CQ”. (many) (coded by K3CT & N2IC)
Bug fix: SO2R digital TX-lockout selection is not correctly displayed on program restart. (K9WX) (coded by K3CT)
Changed the radio configuration tips in the comport setup for IC-751, IC-761, and IC-735. (coded by K3CT)
Added warning message to set the 'Select Device' to default if the OS is Vista.
RFC: fixed runtime error when entering grid (RA3TT)

Version 8.12.5 (Started December 21, 2008)
Added Peace Messenger Contest (Coded by Matej Borovinsek)

Version 8.12.4 (Started December 15, 2008)
Fix runtime error 6 when entering UA1AIK/1 and other UAxxxx/x calls (ON5ZO)
Fixed packet spots appearing in dupe area of log window (K3CT+others) (fixed by N2IC).
Bug fix: Only include mults from the contest band(s) in the total shown in the title bar of Available Window; was including mults on WARC bands in Total (coded by K1MK)
In single band contests, the Availible Window shows a non-zero number of mults available only for the contest band (coded by K1MK)
Added an indicator of split spots in Available window (± next to frequency) (F0887,F0890) (coded by K1MK)
Added a check for sunrise/sunset on spots which is less resource intensive than previous method. Restored sunrise/sunset indicator (¤) to the Bandmap and Available windows. (coded by K1MK)
CQ160: Mark spots with state from call history lookup as mults (if needed) in Bandmap and Available windows (coded by K1MK)
CQ160: Pre-fill province/territory for VE calls based on prefix (Coded by K1MK)
ARRL RTTY: Pre-fill province/territory for VE calls based on prefix (Coded by K1MK)
CQWW RTTY: Correct pre-fill of province/territory for VE special event prefixes (coded by K1MK)
StewPerry: prevent Qs on other bands from being counted in Available window (Coded by K1MK)
Code clean-up in the geographic coordinates routines (coded by K1MK)
ARRL RTTY: Default sent exchange for new log (Coded by K1MK)
ARRL RTTY: bug fix - Show multipliers in Available window (Coded by K1MK)
Account for double and triple mults in totals shown in Available window (Coded by K1MK)
Fill in oblast for spots of UA/UA9 stations only if oblasts count as multipliers in the current contest (Coded by K1MK)
Bug fix: The telnet spots from the SH/DX command do not appear in the Bandmap when the Windows regional preference is set to display fractional numbers using comma format. (LZ5ZI) (coded by K3CT)

Version 8.12.3 (Started December 15, 2008)
Shift-Enter was wiping call & exchange info. (W2UP)
RAEM: Export to file (Cabrillo/Generic) corrected to reflect the current contest sponsor requirement, path to contest web page. (RX9TX)(Coded by NA3M)
Fix error in ADIF importing (Coded by K1MK)
Bug fix: When using Windows preference to display fractional numbers using comma format (EU format), clicking on split spots with UP1 did not program VFOB correctly. (LZ5ZI) (coded by K3CT)
Fixed packet spots overwriting callsign when Auto Completion is enabled (W1TJL) (coded by N2IC).

Version 8.12.2 (Started December 13, 2008)
Restored split of CW & Digi subbands (coded by N2IC)
Off times uses time of first (last) logged QSO as the start (end) of on time. Any time between start (end) of contest and first (last) logged QSO is counted as off time. (F903) (coded by K1MK)
Enable Winkey PTT to work on modes other than CW. Note: This only works for Winkey versions 10, and 21 and greater. (W4TV) (coded by N2IC).

Version 8.12.0 (Started December 5, 2008)
Corrected spot help. Spot age was being divided by 60 (K3CT)
Remove display of 8xxx numbers from Entry Window (many)
Added status line warning if using SO2R and VFO B to avoid logging QSO's on the wrong band (K6LL + others) (coded by N2IC).
Combined CW and Digital subband assignments (coded by N2IC).
Spots made by computers in a multi-computer network do not show correct bandmap multiplier colors on other computers in the network (K7IA) (coded by N2IC).
Changed two Configurer checkbox labels. (coded by K3CT)
Bug fix: The Bandmap mode label flickers in SO2R with K3/subreceiver radio. (N3KS) (coded by K3CT)
Enhancement: Added Unique Call check under the View menu. (coded by K3CT & N1MM)
Turn Rotor menu item in Bandmap and Available window turns to the heading shown in the respective window (PA5DD) (coded by K1MK)
Added lat/long for VK call areas and UA(+UA9) oblasts for more accurate SR/SS calculations (coded by K1MK)
bug fix: Bearings to some VE call areas were being calculated incorrectly (W7ZR,VE1DT) (coded by K1MK)

Version 8.11.3 (Started November 20, 2008)
Warn user & correct longitude if entered wrong
Added option to Bandmap and Packet windows: "Why don't I see spots? (Show packet filters)"
Corrects Dupe Problem in EUPSK63QP contest (Coded by N2AMG)
Corrects problem of Not pre-loading dupe EPC #'s in EUPSK63QP contest (Coded by N2AMG)
Corrects Cabrillo Output for EUPSK63QP contest (Coded by N2AMG)
Corrects display of EU AreaCodes in EUPSKDX Contest (Coded by N2AMG)
Corrects Second mult staus from not being correctly calculated (Coded by N2AMG)
Adds EUAreacodes.sec file (Coded by N2AMG)
Adds EPC-WW-DX Contest (1/31/2009 12:00 - 2/1/2009 12:00 PSK125 Only) (Coded by N2AMG)
Enhancement: Added IC-7200 & IC-7600 radio selections. Owners please report any radio control issues. (KC9GGV ) (coded by K3CT)
Bug fix: When opening a new QSO Party contest, display the first QSO Party name in the selection dialog box. (W5OV) (coded by K3CT)
Bug fix: Ky QSO Party score and multiplier updates. (K4FT) (coded by K3CT)
Bug fix: Fixed startup runtime error if database was stored on a mapped drive that is no longer available. Storing databases on network drives is not recommended. (AG1C) (coded by K3CT)
Enhancement: Added nine new Cat Macros. See reflector message # 57647. CATASC macros are untested due to lack of volunteers. (coded by K3CT)
Bug fix: When editing the F-keys, the other Entry window function keys are not updated. Need to open the F-key editor in the other Entry window or restart program. (coded by K3CT)
Bug fix: ALT+CTRL+SHIFT+Up always jumps to the bottom of the band. (coded by K3CT)
Enhancement: For SO2V enabled CTRL+SHIFT+Up/Dn and ALT+CTRL+SHIFT+Up/Dn. In SO2V mode when a split spot is selected, the TX VFO is not programmed because it could change the Run VFO. A status message was added to inform the user that the QSX wasn’t programmed. All four keyboard commands are disabled for SO1V. These commands have been changed to skip over the CQ-Frequency if both radios (SO2R) or VFO’s (SO2V) are on the same band. Operation is radio dependent. (N1EU & N1MM) (coded by K3CT)
Enhancement: Changed the K3 to operate in K31 mode, changed filters to use FW commands, added polling of the Sub receiver mode. Added some SO2V improvements, still more work required. (W4TV, N1EU) (coded by K3CT)
Manual Updates: Cat Macro additions. CTRL+SHIFT+Up/Dn & ALT+CTRL+SHIFT+Up/Dn keystrokes will skip over CQ-Frequency when radios/VFOs are on the same band. Proper keystroke operation is radio dependent.
Bug fix: default ITU zone for VY and VO prefixes (B1097)(coded by K1MK)
Value of CONTEST_ID field exported to an ADIF file complies with ADIF 2 specification (coded by K1MK)
Print to File in View, Statistics prints a zero for a null value (instead of a space) (coded by K1MK)
Import Goals will import a text file created by Print to File in View, Statistics (coded by K1MK)

Version 8.11.2 (Started November 10, 2008)
Add @ macro operator to voice the current receive frequency. Frequency will be voiced to the nearest 100 Hz dropping .0 if receiving on an even KHz frequency. This capability can be used to avoid having to rerecord CQ messages on 40m split. Example message: wav\{operator}\CQ Listening.wav@wav\{operator}\AndThisFreq.wav (N2IC)
Configurer: added ability to specify letters directory, e.g. C:\N1MM Logger\wav\{operator}\ This provides the ability to have separate letters file for each operator. The decimal point (.) should be specified as Point.wav.
VHF general - EDI output - Changed band separator in filename from . to _ Example: PA5DD_144.EDI (Coded by PA1M) (PA5DD)
VHF general - EDI output - Changed Band from 435 MHz to 432 MHz according to EDI documentation (Coded by PA1M) (PA5DD)
Corrects Errors in the MMVARI engine that prevented correct WAE operation (Coded by N2AMG)
Adds {DIGQTCR} and {DIGQTCS} to use in macro button to open Digital QTC Recieve window and Digital QTC Send window (Coded by N2AMG)
WAE RTTY gives warning when No revieved number is not entered (Coded by N2AMG)
Corrects cutting off QTC Header numbers with QTC series greater than 100 (Coded by N2AMG)
Corrects EPCPSK63 Contest for always saying not in PSK63 mode (Coded by N2AMG)
CQ 160 - Changed start-of-contest time (K1EP) (coded by N2IC).
WAE - Fixed incorrect sent QTC #0000 in Cabrillo output (N3RS) (coded by N2IC).
Fixed crash when accidentally importing goals from non-existent database (K1TTT) (coded by N2IC).
Goal import allows import of goals by band (K1TTT)(coded by K1MK)
Added goal import from a text file. Text file can be either a whitespace delimited file (.txt) or a comma separated file (.csv). User selects which file type in the Choose a File dialog box. Contents of the text file are: 1st field/column is the day/hour as dhh, 2nd field/column is the all band houtly rate. For importing goals by band, 1st field/column is the day/hour as dhh and the subsequent fields/columns are the hourly rate on 160, 80, 40, 20, 15 & 10. (coded by K1MK)
VHFNAC - EDI output - Corrected total score CToSc (including mult and bonus points) (Coded by PA1M) ( SM7GVF)
VHFNAC - EDI output - Added new grid indicator if contact in new grid (Coded by PA1M) (SM5OUU)
VHFNAC - EDI output - NAC is one day not two days (Coded by PA1M) ( SM5OUU)
VHFNAC - EDI output - Serial numbers in output removed (Coded by PA1M) ( SM5OUU)
VHF general - EDI output - Corrected QSOcount (including dupes) (Coded by PA1M) ( SM7GVF)

Version 8.11.1 (Started November 6, 2008)
OK-OM fixes (coded by PA1M)

Version 8.11.0 (Started November 2, 2008)
RSGBCLUB: Added RCVNr in logwindow (G3LDI) (Coded by PA1M)
RSGBCLUB: Working non-G stations allowed (G3LDI) (Coded by PA1M)
VHFNAC - Removed adding 500 point to a multiplier (log window/summery sheet) (Coded by PA1M)
VHFNAC - Added bonus calculation to EDI export file (Coded by PA1M)(PA4PS/SM7GVF)
Corrected the ADIF export of the FREQ_RX and FREQ fields to follow the ADIF standard. (W3ZV) (coded by K3CT)
Corrected the COM and LPT setup window tool tips. Fixed the label error when switching between the COM and LPT setup windows. (VE1DT) (coded by K3CT)
ALT+O does not store the callsign in the bandmap every time, sometimes the tools menu opens. The tools menu and Store button both used ALT+O as the hot key. Removed the tools menu hot key. (VE1DT) (coded by K3CT)
Program split is not set/cleared when the Omni-VII radio split button is pressed. Fixed the Jupiter radio for the same issue. (W4PM) (coded by K3CT)
Added K3 program support for the {ANTRX1TOGGLE} and {ANTRX2TOGGLE} macros. (N2TK) (coded by K3CT)
Fix KY QSO Party scoring error, remove Name, add RST, add web address, and fix county abbreviations. Short notice and limited testing of these changes. (K4FT, W4NZ) (coded by K3CT) BR>Adds means to adjust Color levels for MMVARI. Located above color selection boxes in MMVARI setup See Tooltip for explination (Coded by N2AMG)
Corrects Scoring of MakroRTTY contest with own Grid. (Coded by N2AMG)
Corrects issue with Entry Window Macro's changing to SSB when selecting BPSK in MMVARI. (Coded by N2AMG)
Updates CIS Area Codes .sec file (Coded by K8UT)

Version 8.10.7 (Started October 31, 2008)
Until a better technique can be coded and tested, remove the F-key macro input blank line error checking added in version 8.10.1. (coded by K3CT)

Version 8.10.6 (Started October 20, 2008)
Fixed Error 3061 when executing multi-station resync. (coded by N2IC)
Improved resync status messages. (coded by N2IC)
My multi-single, Entry Window status line will now say "Run" or "Mult", rather than "Run1" or "Run2". (coded by N2IC)
B0902 - Fixed double RST output in Illinois QSO party when working out-of-state stations on SSB. (coded by N2IC)

Version 8.10.5 (Started October 18, 2008)
Bug fix: In SO2V mode, LPT PTT or COM PTT does not activate when VFOB is active. This bug occurred in all modes. SO2V users with LPT PTT should set the radio number to 1. The tool-tip has been updated to reflect this change. (K1TTT) (coded by K3CT)

Version 8.10.4 (Started October 17, 2008)
Fixes error 91 on startup when using SO2R and an incomplete function key table. (coded by N2IC)

Version 8.10.3 (Started October 16, 2008)
Changed scoring in Stew Perry contest to 1.5 points for low power, 3 points for QRP. (coded by N2IC)
Changed DX exchange in CQ 160 contest to RS(T) and CQ Zone. (coded by N2IC)
B0903 - Fixed serial number 1 sometimes sent in error. (N3KS, W4NZ and many others) (coded by N2IC)

Version 8.10.2 (Started October 13, 2008)
Recompiled CW IF.exe to incorporate changes below

Version 8.10.1 (Started October 8, 2008)
Many QSO parties have different scoring rules for in-state and out-of-state participants. When creating a new log for a QSO party, a message box will inform you whether you are an in-state, or out-of-state participant, based on your ARRL section.
bug fix: suspect zones shouldn't report HQ stations (K1TTT) (coded by K1MK)

bug fix: Suspect zone report on VK6, some UA9s not correct (K1TTT) (coded by K1MK)

Bug fix: In ESM mode, do not allow the Busy Literal to enter the callsign box. (N4ZR) (coded by K3CT)
Feature Request F0546: In Configurer, Function Keys tab, added cut number options and changed the meaning of send leading zeros. Since the meaning has changed, when switching between older versions and this version revisit these two program options and make your selection. This is a one time change going forward. Thanks to VE1DT for research and both VE1DT & PC5M for endless input and testing. I will consider a programmable string when time allows. Note: The existing CTRL+G command toggles cut numbers on/off. (coded by K3CT)
Enhancement: Expanded the cut letters that can be entered into a “serial number” field and decoded to numbers. The complete list is: A, N, T, O, E, S, U, W, G, and D. Thanks to VE1DT for input. (coded by K3CT)
Enhancement: Add new macros {TURNROTOR} and {STOPROTOR}. Note that per the manual some functions are not supported for all rotor brands. Due of this, {STOPROTOR} is being released untested. (PA5DD) (coded by K3CT)
Enhancement: For the LZ Open contest selection. Change the Bandmap and Available window callsign colors when stations can be worked again. This is updated every 10 seconds and the radio needs to be connected to function. Set your Bandmap callsign timeout greater than 30 minutes. (LZ2BE) (coded by K3CT)
Enhancement: For the LZ Open contest selection. Always send leading zeros since it is required. Print the sent exchange on the status line in numeric format even if cut numbers is enabled. (VE1DT) (coded by K3CT)
Enhancement: Added a user input error check for a trailing unused blank line in the S&P CW macro window. (coded by K3CT)

Version 8.10.0 (Started September 30, 2008)
CQWWRTTY: Create default exchange in correct order.
CQWWRTTY & others: Use user-entered zone for default zone.
Default zones for VE: VE8 is zone 1, VY0 is zone 2 (Coded by K1MK)
In DI, update zone for a US station after a successful Call History lookup of the state. (Coded by K1MK)
Fixed crash when {PASSMSG} was given a non-existent station number. (K1TTT)(Coded by K1MK)
Fixed a typo in VE base prefixes (Coded by K1MK)
Bug fix: LZ Open and LZ Sprint contests, send leading zeros in the exchange when the Configurer option to send leading T’s is unchecked. This is only done in the LZOPEN contest selection since leading zeros in the exchange are necessary. (W1EBI) (coded by K3CT)
Bug fix: LZ Open and LZ Sprint contests, the last exchange (F2 or =) is incorrect after logging a station. (LZ2BE) (coded by K3CT)
Bug fix: TX & TN QSO Party contests, Cabrillo output contains an extra 59 for out of state SSB contacts only. (K5WW, W9WI) (coded by K3CT)
Enhancement: Wording changes in the File, Export, Cabrillo Output to reflect the current program menu text. Added a check in this routine for the exchange 59 and display a user information message when it exists. (coded by K3CT)

Version 8.9.7 (Started September 27, 2008)
Bug fix: LZ Open and LZ Sprint contests, update the 30 minute dupe time calculation allowing valid contacts when the QSO time is 30 minutes or greater. Do not include the seconds of the QSO’s in the time calculation. (LZ1GL & LZ2BE) (coded by K3CT)
Enhancement: LZ Open and LZ Sprint contests, added a check to make sure the first three exchange characters are numbers. Exchanges may contain letters or numbers after the first three characters. (coded by K3CT)
Experimental change: LZ Open and LZ Sprint contests, display the sent exchange on the Entry Window status line. This addition expects that the {LASTEXCH} macro is used as required by these contests. (coded by K3CT)
Bug fix: LZ Open and LZ Sprint contests, add a space after the first three characters in the Cabrillo output exchanges. (LZ1GL) (coded by K3CT)
Bug fix: LZ Open and LZ Sprint contests, when cut numbers are enabled, send the entire exchange in cut number format. (LZ2BE) (coded by K3CT)

Version 8.9.6 (Started September 20, 2008)
Bug fix: Icom SO1V/SO2V user starting program without MicroHam Router loaded causes runtime error. (VE1DT) (coded by K3CT)
CQWW RTTY: Make State & zone the default exchange for 48 states (K1TTT)
CQWW RTTY: Color-code US state multipliers (K1TTT) (Coded by K1MK)
Bug fix: Update LZ Open contest module. Allow 40m & 80m operation, received information can be 4 to 6 characters long non-numeric, correct the sent exchange. Added Cabrillo output and display of time since station worked in Info window. The sponsor does not ask for the display of seconds in the log data, only hours/minutes. The calculation of the 30 minute dupe period truncates the seconds to match the Cabrillo time output. Please test prior to the October 4 contest. (LZ2BE) (coded by K3CT)

Version 8.9.5 (Started September 18, 2008)
Fixes for digital run/sp state changes in SO1V and for MMTTY AFC switching (Coded by K1MK)
Removes total QTC shown in QTC Status line for EU station except during RTTY (Coded by N2AMG)
Corrects added SpacePress after using {GRAB} macro (Coded by N2AMG)
Bug fix: Change ADIF export for Russian DX, Russian DX RTTY, and RDAC to use SRX for serial #’s, CQZ for zone, and STATE for Oblast in the exchange. (RX9TX) (coded by K3CT)
Bug fix: Fixed contest URL for RDAC. (coded by K3CT)
Enhancement: Re-enabled the Icom radio address check on Configurer exit and modified for SO2R. (coded by K3CT)
Bug fix: Fixed ROPOCO contest exchange = ?? bug. Please test this contest and LZOPEN. (several) (coded by K3CT)
Bug fix: Fixed Icom SO1V/SO2V Bandmap Reset Radios and Radio Retry after com port timeout. (coded by K3CT)
Enhancement: WAE contests compute Last 10/100, Last N-Minutes, and Rate Graph based on QSO’s instead of QSO’s plus QTC’s. (KD4D) (coded by K3CT)
Bug fix: Added default radio address of 0x4 for Omni VI. (coded by K3CT)
Bug fix: FT1000/MP/FT920 clicking on the same split spot toggles split. (K1TTT) (coded by K3CT)
Bug fix: Current version is slower to configure radio then version 7.10.12 when clicking only on split spots. The fix was applied to all radios so please test by clicking on split and none-split spots. (K1TTT) (coded by K3CT)
Enhancement: To reduce setup errors, changed the Configurer Dialog Radio Nr selector label and Tool Tip based on Configurer options selected. If SO1V or SO2V is selected, the Radio NR is pre-loaded to the correct value of 1. If the SO1V or SO2V user insists on selecting the improper radio Nr, it will be detected on Configurer exit. If the SO1V/SO2V/SO2R selector is changed after the radio port is configured, the Radio Nr is automatically set (existing code). (PC5M,N1MM) (coded by K3CT)

Version 8.9.4 (Started September 14, 2008)
Multipliers.frm : Localized the date format (Coded by K1MK)
N1MMLoggerCommon.bas, InfoWindow.frm : Added PASSMSG macros
Packet.bas : Fix call history look-up of state/section for new spots. Something that I want working correctly for CQWW RTTY (Coded by K1MK)

Version 8.9.3 (Started September 10, 2008)
Added lock to prevent memory corruption of callsigns and serial numbers while sending CW (many) (Coded by N2IC)
- Changes for Colorado QSO Party (coded by N2IC)
- Allow Colorado counties as mults for Colorado stations.
- Removed RS(T) from exchange.
- Fixed Cabrillo output.
- Fixed scoring for non-USA/VE QSO's.

Version 8.9.1 (Started September 3, 2008)
CO Qso Party: changed exchange to name & state/county. Added link to web site. (KE0WO)
Disable alt-key toggle of menu option underscores. Eliminates need to press alt again or esc to get out of "menu mode" (KG5U)
Digital- Corrects problem of VFO B not initializing after the DI loads (Coded by N2AMG and K3CT)
WAE- Shows total number of QTC Available to send in QTC Status line on Entry windows (Coded by N2AMG)
QTC Status bar now shows number of QTC Exchanged with current callsign / Number left to send to that callsign / Total number of QTC left to be sent

Version 8.9.0 (Started September 1, 2008)
Bug fix: Fixed the ESM bug introduced in version 8.8.2. (several) (coded by K3CT)

Version 8.8.2 (Started August 26, 2008)
Gracefully shuts down CW IF 3 seconds after N1MM Logger shuts down.
Fix to allow {RUN} macro to work correctly with "Do not run on CQ frequency" feature. (K1ZZI) (coded by N2IC)
Digital- Corrects problem of clicking on 6 digit Grid Squares in RX Window (Coded by N2AMG)
Digital- Corrects issue of clicking on F/xxxxx Callsigns in RX Window (Coded by N2AMG)
Digital- Corrects Run-Time error 5 when using MMVARI and minimizing the Logger (Coded by N2AMG)
Digital- Disables accessing mixer controls from DI is using VISTA until a workaround found (Coded by N2AMG)
Digital- Corrects problem where {LOG} and {SCQ} would get transmitted after lastcall in callstack was sent using LogthenPOP (Coded by N2AMG)
Digital- Updates macro substitutuion list in the macro setup are in Digital Setup (Coded by N2AMG)
Digital- Adds toggle selection to MMVARI Bandpass filter to turn it on or off so it is not enabled all the time (Coded by N2AMG)
Digital- If "?" in call in Entry window does not moves cursor out of the Callsign box and highlights the ? (Coded by N2AMG)
Digital- Corrects issue with AutoTRX not functioning correctly in the MMVARI Engine (Coded by N2AMG)
Bug fix: In SO2R when left radio sending, entry focus on right radio, {WIPE} macro functions differently than ALT+W. The previous program operation is unchanged if the macro contains any additional text ({WIPE} plus something else). (K9YC) (coded by K3CT)
Bug fix: If COM DTR is set to CW but CW/Other not checked in Configurer, the program uses COM port keying. (coded by K3CT)
Bug fix: Omni VII with Radio PTT via Command checked generates a program error. This also fixes the same issue with the Jupiter and Argonaut radios. (N7GVV) (coded by K3CT)
Feature request: Display Run/Mult indicator column in Log Window. (9A3OS) (coded by K3CT)

Version 8.8.1 (Started August 19, 2008)
Bug fix: Fixed the File | Open bug introduced when addressing erroneous radio communications time out in the last version. (N2CU) (coded by K3CT)
Bug fix: Fixed Icom SO1V/SO2V Alt+F10 swap VFO operation for those radios that lack a swap VFO command. Added a program routine to perform the VFO frequency and mode exchange. (coded by K3CT)
Feature Request # F0994: Added IC-910/H radio control. (PE1ITR) (coded by K3CT)
Manual Change: For the IC-910/H, the ALT+F12 radio specific command swaps MAIN and SUB using the CAT radio command which is incorrectly documented as a VFO swap command. The ALT+F10 command swaps the VFOA/B frequency and mode only in SO1V and SO2V program modes. (K3CT)
Manual Change: The ALT+F10 swap VFO frequency command is disabled during SO2R for Icom radios that lack a swap VFO CAT command. This is because the program is unaware of Icom VFO B frequency in SO2R mode. (K3CT)
Bug fix: Updated the links for several QSO Parties. (coded by K3CT)

Version 8.8.0 (Started August 1, 2008)
Feature Request F0991: Allow CW to be adjusted in 1 WPM steps. (W3YY) (coded by K3CT)
Feature Request: Allow CW to be adjusted on inactive radio. (N2IC) (coded by K3CT)
Manual changes: Added two CW speed adjust step sizes to Configurer, Other tab. The primary speed step is used with PgUp/PgDn or the speed adjust in the Entry Window. The secondary speed step is used when Shift+PgUp/PgDn is pressed. Alt+ PgUp/PgDn adjusts the CW speed of the inactive radio/VFO in SO2R/SO2V mode. (coded by K3CT)
Enhancement: Prevent radio communications timeout when Configurer, LogSelection, or StationDialog windows are open. (coded by K3CT)
Bug fix: Bandmap frequency display not tracking Icom radio when switching between spots quickly since updating to MicroHam Router version 7 software. Eliminated zero byte after EOM code for Icom radio frequency command which caused Router software to loose sync with the radio. (VE1DT) (coded by K3CT)

Version 8.7.1 (Started July 28, 2008)
Bug fix: When CTRL+T ends the TUNE the mode does not change back to USB. Fixed both the mode change before and after TUNE. (N8RA) (coded by K3CT)
Added configuration setting "Do not run on CQ frequency". When you QSY back to an old Run frequency, the mode stays in S&P. F1 and Alt-Q continue to switch to Run mode. This is most useful in Sprint-like contests. (coded by N2IC)
Changed the bandmap check for old spots timer to 1 minute from the current 5 minutes when the Packet Spot Timeout is set to less than 5 minutes.(coded by N2IC)
Bug fix: Fix the Icom only “ptt via radio command” bug introduced in 8.6.3. To improve the reliability, added a 50ms delay for Icom only allowing the radio command to be received before the transmission begins. Please provide feedback on this delay addition. (GM4OSS, WB8JUI) (coded by K3CT)

Version 8.7.0 (Started July 13, 2008)
Bug fix: CTRL+T in SO2R with COM & LPT or WinKey & Other port keying does not send on the correct radio. Works if you send CW first. (N8RA) (coded by K3CT)
Bug fix: Pressing PAUSE while in TUNE (Ctrl+T) causes the radios or VFO’s to switch. (N8RA) (coded by K3CT)
Bug fix: Red dot does not change when in TUNE (Ctrl+T). (N8RA) (coded by K3CT)
IARU ADIF: HQ stations exchange was not being imported (LU5FF)
B1022 - On SSB, Dueling CQ's - Radio1 sends one CQ cycle but Radio2 always sends 2 CQ (coded by N2IC).
Bug fix: Program does not send double-dash when “=” is entered in the CW window. (W4LT) (coded by K3CT)
Bug fix: Discovered that the following keys also did not work ! “ ‘ ; in the CW window. The “. .- -.” is now sent with the “^” (caret) key. The exclamation key is used in messages to send the callsign entered in the entry window. (coded by K3CT)
Bug fix: Entering 9999999 for a radio communications timeout produced an error. (VE3NCQ) (coded by K3CT)
Enhancement: Added the ability to disable the radio communication timeout via the bandmap window menu. This was added to use the FT-757GX with the FT-757GXII radio selection. The FT-757GX does not send anything to the program so it will have limited functionality. (VE3NCQ) (coded by K3CT)
Manual changes: The “. .- -.” character is sent with the “^” key not the “!” key. The short dash keyboard key sends “ - . . . . –“ not “ -.-..-“
Bug fix: FT-857D using FT-897 radio selection briefly changes window display of frequency, mode, split, and mode. Added code to work around the incorrect radio CAT output that occurs after setting frequency & mode. Combined and improved the efficiency of the FT-817 and FT-897 frequency programming routine. (n6ef) (coded by K3CT)

Version 8.6.4 (Started July 12, 2008)
Bug fix: FT-2000 / FT-DX9000, corrected radio control when “Dual Rx Always On” is checked. (W2NRA) (coded by K3CT)
Bug fix: Enabled K2 antenna # 1 / # 2 switching with antenna macros. (N4OGW) (coded by K3CT)
Bug fix: Fixed goal import that was broken in version 8.6.0. Changed import window button to “Open”. (VA7RN/VE1DT) (coded by K3CT)
Bug fix: When a single LPT port was used for radio # 2 PTT, the same PTT output toggled for radio # 1. SO2V LPT PTT users will have to set the Radio / VFO selector to “Both”. If set to 1 or 2, PTT will only activate for only that VFO (SO2V mode only). (coded by K3CT)
Enhancement: Prevent LPT PTT from activating on the same LPT port used for external DVK (DVK checked). Added note in LPT config window for external DVK use. (coded by K3CT)
Enhancement: Added configuration check on Configurer exit to check for external DVK and COM port RTS or DTR PTT. (coded by K3CT)
Enhancement: Orion / FT-2000 / FT-DX9000, when dual RX is disabled in SO1V mode, select VFOA. (coded by K3CT)
Digital-Corrects issue of not being able to click on calls with a / in them unless clicking directly on the / (Coded by N2AMG)
Digital-Corrects problem of clicking on some exchanges and te exchange being converted to FIGS in Exchange box (Coded by N2AMG)
Digital-Corrects problem of decting callsigns in garbage if callsign was in lower case (Coded by N2AMG)
Digital-Improves speed of decting and coloring of calls for normal calls and calls in garbage (Coded by N2AMG)
Digital-Corrects issue of not switching to proper radio mode set for digital modes on startup or digital mode changes (Coded by N2AMG)
Digital-Corrects issue of not being able to click on 23A type exchanges (Coded by N2AMG)
Digital-Corrects issue of not being able to click on calls or exchanges being seperated by periods (Coded by N2AMG)
Digital-Rewrites MMVARI Bandpass filter code. See message in fourms for description (Coded by N2AMG)

Version 8.6.3 (Started June 29, 2008)
Bug fix: Fixed the stuck on run bug introduced in 8.6.0. (many) (coded by K3CT)
Change searching with ? to be full SQL * & ? searching (Ve1DT) (experimental)
Bug fix: Fixed the stuck on run bug introduced in 8.6.0. (several) (coded by K3CT)
Bug fix: SO2V Available window focus doesn’t follow VFO selection. (VE1DT) (coded by K3CT)
Bug fix: SO2V Available window correct left/right click on band buttons. (VE1DT) (coded by K3CT)
Bug fix: SO2R Available window band button does not lock out other radio band. (coded by K3CT)
Bug fix: SO2R Bandmap shift+click on minor frequency tick marks did not work. (coded by K3CT)
Bug fix: SO2V Clear radio split when clicking on Bandmap minor frequency tick marks. (VE1DT) (coded by K3CT)
Bug fix: SO2V Icom Dual Watch radio operation for SUB VFO split & non-split switching. (VE1DT) (coded by K3CT)
Bug fix: SO2V Fixed several sequence specific Bandmap window, Available window, and radio control issues. (VE1DT) (coded by K3CT)
Bug fix: Available window added Shift+Click on spot for SO2R & SO2V. (PC5M) (coded by K3CT)
Bug fix: Eliminate radio frequency change while sending and Bandmap frequency bar is clicked. (coded by K3CT)
Bug fix: Omni VII program error when clicking on bandmap RIT buttons. (W4PM) (coded by K3CT)
Enhancement: Added SO2R and SO2V Available window menu options for single click on spots. (coded by K3CT)
Enhancement: Changed text and grayed out Available window menu “QSY Right Radio” for SO2V & SO1V. (coded by K3CT)

Version 8.6.2 (Started June 21, 2008)
Support "=" in wl_cty.dat (AD1C)
AL Qso Party: update with four character county abbreviations
Bug fix: SO2V, when radio VFO is changed, Entry Window does not change focus with some radios. Note: due to a radio limitation, this non-functional with Icom radios. (S51J) (coded by K3CT)
Bug fix: Info Window display of Multi/Run is not visible in multi-single. (coded by K3CT)
Bug fix: (#1036) FT-890 always displays split. (YO2LLQ) (coded by S51J & K3CT)
Bug fix: FT-840, FT-890, FT-900 SO2V additions, reduced polling overhead, combined common code, and worked around FT-900 & FT-890 firmware bugs. Known issue with SO2V/1V ALT+F10 when vfos have different modes. (coded by S51J & K3CT)
Bug fix: FT-847 PTT Xmit on/off reversed. (N2QT) (coded by K3CT)
Bug fix: FT-450 uncovered and worked around radio firmware bugs that prevented correct SO2V operation. When the Yaesu firmware change is released, these patches will have to be removed. Firmware versions up to and including 0165 will work correctly with this program release. (NS9I) (coded by S51J & K3CT)
Bug fix: FT-900 clicking on callsign in VFOB bandmap does not change VFOB frequency. (UA1NFA) (coded by K3CT)
Bug fix: (#1034) Correctly detect CW S&P CQ messages that begin with <, >, or ~ and followed by “CQ”. (W7ZR) (coded by K3CT)
Bug fix Icom radios: If passing through split/non-split spots with Ctrl+Up/Dn quickly, sometimes split is not correctly cleared. (VE1DT) (coded by K3CT)
Bug fix: (#766) SO2R Shift+Click on callsign or frequency to change non-focus radio frequency is non-functional. There is mixed feedback from beta testers. WinKey users can Shift+Click while transmitting while LPT port users can not. Let’s collect some feedback to determine if this change should stay in the code. (F6IRF, N5DX) (coded by K3CT)

Version 8.6.1 (Started June 8, 2008)
AL QSO Party: fixed web address (W7WHY)
AL Qso Party: update with four character county abbreviations
YV: New contest: Independence of Venezuela Contest (YV1DIG) (Coded by PA1M)

Version 8.6.0 (Started May 25, 2008)
(Mostly) fixes the 10 minute multi-single timer.
Display "MULT" and "RUN" in the Info Window. Switched with ctrl-alt-M.
In multi-single Cabrillo, the station number field now matches with mult and run station, rather than the N1MM station number.
FDREG1 - Support for Italy added (IK0XBX) (Coded by PA1M)
LZOPEN: Support LastQsoExch (PA1M)
Available: eliminate sunrise/sunset indicator for performance reasons (N2IC)
Multi-user: Don't refresh all spots on other computers when contact logged.
Bug fix: FT-920 SO2R focus switching incorrectly. (WZ2T) (coded by K3CT)
Bug fix: Footswitch code not changing VFO’s in SO1V mode. (G3RXQ) (coded by K3CT)
Bug fix: TS-2000 Com port help text incorrect. (coded by K3CT)
Improvements: Minor changes in various internal routines. (coded by K3CT)

Version 8.0.0 (Started May 12, 2008)
LoadBeacons: correct internationalization problem loading beacons (PA1M)
Performance problem in DX and related contests (Coded by N2IC)
Was reversing newer attributes of spots when sorting. Seen in beacons gridsquares (PA5DD, PC5M)
Add operator to crosscheck reports (PA1M)
Add check for varying gridsquares in crosscheck reports (PA1M)
Info: Hide record level when rates section hidden (PC5M)
EntryWindow: Eliminate numbers around 8000 from occasionally appearing in status bar (PA1M)
IOTA: Change color of IOTA and of available buttons for new island, even if no callsign specified (MM0BQI)
Digital -Corrects issues of not being able to click on calls with "/" in them (Coded by N2AMG)
Digital -Corrects issue of when clicking on the sent number it would changes to Letters when entered into EW (Coded by N2AMG)
ARIDX Contest - Changes previous QSO info prefill to only happen if Contact is with I or IS stations (Coded by N2AMG)
EUPSKDX Contest -Corrects Cabrillo output to correctly show sent numbers (Coded by N2AMG)

Version 7.12.26 (Started April 28, 2008)
Bug fix: CAT1HEX macro not working with non-Icom radios. (NI1L) (coded by K3CT)
Bug fix: FT-2000 Sub mode setting doesn’t change properly. (WA2MBP) (coded by K3CT)

Version 7.12.25 (Started April 12, 2008)
Digital-Corrects not being able to directly click on single characters to grab them. (Coded by N2AMG)
Digital- While in RTTY Mode Shift-Click will cause the moused over text to be Letter/Figs converted on the fly while sending to Entry Window (Coded by N2AMG)
OKOMDX: B997 Fixed showing non-OM/OK stations in Red (K0RC) (Coded by PA1M)
Bug fix: Fixed many FT-897 & FT-857 radio control issues and enhanced operation. FT-857 owners should use FT-897 radio selection. (N8RA,N0LY,PF2D) (coded by K3CT)
Bug fix: FT-950 radio control, filter selection, RIT/XIT. (K8TJM) (coded by K3CT)
Bug fix: FT-2000 filter selection, RIT/XIT. Changed the FT-2000 code to send multiple commands to the radio. Should improve response. (PD2AFO) (coded by K3CT)
Improvement: Changed Com port setup help for FT-817, FT-897, FT-950, and other Yaesu radios. (coded by K3CT)
Operational Change: Disabled PAUSE, CTRL+RightArrow, and the opening of VFOB bandmap in SO1V mode. (coded by K3CT)
Bug fix: # 1048 QSY Wipe feature not wiping call. See related note below. (K1EP) (coded by K3CT)
Enhancement: Added FT-450 radio selection. SO2V VFO switching needs debug. (PA7PYR, NS9I) (coded by K3CT)
Bug fix: Fixed the Bandmap display of RIT Frequency and RIT / XIT buttons for several radios and the “no radio” case. (coded by K3CT)
Bug fix: Changed multi-user mode to inhibit DeleteSpot of the CQLiteral (SOCallStack / MultiUser stacking bug). (WE3C) (coded by K3CT)
Bug fix: # 1019 K2 & K3 radios canceled split on program start. (K1EP) (coded by K3CT)
Bug fix: Eliminated FT-817 invalid radio data when changing bands. (PF2D) (coded by K3CT)
Enhancement: Moved Program Execution Logging from Config to Tools menu. Added options for program debug. Removed program compile directive for radio debug logging. (coded by K3CT)
Enhancement: Added a multi-user tools sub-menu for multi-call stacking with seven new selections. (coded by K3CT)
Bug fix: Fixed the band change overflow for FT-817, FT-847, FT-897. (N8RA) (coded by K3CT)
Note: Closing all radio related bugs for FT-857, FT-897, FT-950, and FT-2000.
Note: Users with QSY wipe issues, please report operating mode (SO1V,SO2V,SO2R) and all radio VFO frequencies (A/B).
CQWW/GACW: Updated texts Entry Window fields (K0RC) (Coded by PA1M)
PACC: Made order EW field consistent for non-PA (K0RC) (Coded by PA1M)
REFCW/SSB: Updated URL + updated texts EW fields (K0RC) (Coded by PA1M)
REFCW/SSB: Fix length Department to 2 digits (i.e. 1 becomes 01) (Coded by PA1M)
REFCW/SSB: Major rewrite multipliers and export files (Coded by PA1M)
REFCW/SSB: Please check thoroughly before using in the real contest.
WAE contests: Made order texts EW fields consistent (K0RC) (Coded by PA1M)
Added LZopen Contest (LZOPEN) (many) (coded by PA1M)
Adds EU-PSK-DX Contest Please TEST!!! (Coded by N2AMG)
Adds EPC-PSK63 Contest Please TEST!!! (Coded by N2AMG)
Adds PSK as a contest mode in the Contest Mode selection Dropdown (Coded by N2AMG)
Changes Cabrillio mode output from PS to RY (Coded by N2AMG)
Remove RST from MI QSO Party Cabrillo output (many)

Version 7.12.24 (Started April 8, 2008)
Improved the wording in several user messages, validated the version of DefaultSettings.txt file before loading. (coded by K3CT)
Warn the user if they have a blank entry in the multi-computer station table. A blank entry can cause computers to not be able to connect to each other. (Coded by N2IC)
Fixed problem with SO2R ESM where an S&P pounce on radio B would occasionally fail if radio A was transmitting. (Coded by N2IC)
Added RSGB ROPOCO (ROPOCO) contest (many) (coded by PA1M)
Added RSGB AFS contest (RSGBAFS-C and RSGBAFS-S) (many) (coded by PA1M)
Added RSGB Club Calls contest (RSGBCLUB) (many) (coded by PA1M)
Added RSGB 21/28 MHz contest (RSGB2128) (many) (coded by PA1M)
Added RSGB 80 Meter Club Championship (CRSGB80MCC) (many) (coded by PA1M)
Added RSGB Low Power Contest (CRSGBLP) (many) (coded by PA1M)
B1032 Fixed showing non-PA stations in Red (K0RC) (Coded by PA1M)

Please check the above contests if implemented correct long before the contest so we could update where needed!

Version 7.12.23 (Started April 2, 2008)
Corrects Double Click causing Run Mode to be dropped. (Coded by N2AMG)
Adds Numeric check for string being sent to EW by a double click in DI2 (Coded by N2AMG)
Corrects CQ Repeat and SCQ Timer from not being triggered correctly When in Digital (Coded by N2AMG)
Corrects Text Label in Digital setup for AFC On/OFF with run change (Coded by N2AMG)
Adds ability to turn off checking for callsigns in garbage text in digital (Coded by N2AMG)
Corrects not being able to click on serial number 599 (Coded by N2AMG)
When clicking on a time exchange with ":" will now strip off the ":" before it goes to the entry window (Coded by N2AMG)
Allows ability to click on individual parts of exchanges when sent like xx/xxx/xxxx (Coded by N2AMG)
Makes MMVARI the default digital engine when loading the digital window for the first time. (Coded by N2AMG)
Adds new sttings and changes others in Default Settings.txt (Coded by N2AMG)

Version 7.12.22 (Started March 22, 2008)
Orion: Added debug statements (Coded by N2IC)
CALLSIGN.PAT: Add warning for t9 prefixes now that they should have switched to e7 (K1MK) (Coded by K1TTT)
PTT delay was being doubled (many)
Fix for runtime error 3008 on PacketSpot error. Removed dbDenyWrite parameter (many)
Change to the reverse grid bearing (added parenthesis around it) to make it stand out. (Coded by PA1M)
SPRINTRTTY: Removed three intervening QSO rule (W0YK) (coded by PA1M)

Version 7.12.21 (Started March 21, 2008)
Corrects not being able to click on exchanges with Digital Call stacking turned on (Coded by N2AMG)
Corrects ESM Highlights not moving to the next state when using {LOGTHENGRAB} in Digital (Coded by N2AMG)

Version 7.12.20 (Started March 19, 2008)
BARTG: Added setting of time in {LogThenPop} (Coded by N2AMG)
WANLC: Added Cabrillo (PH2M) (Coded by PA1M)
Removed skimmer filter (many)

Version 7.12.19 (Started March 18, 2008)
Bug fix: Autocomplete is now inhibited when calls are popped off the stack until it is logged or wiped. (GM3SEK) (coded by K3CT)
Enhancement: In CW, if {LOGTHENPOP} can not pop a call off the stack and the logged callsign was changed, send corrected call if enabled and the TU message. (coded by K3CT)
Bug fix: # 908 Any macro name can be used in the key definition, pressing shift has no effect. (N2IC & VE3IAY) (coded by K3CT)
Corrects not setting Time sent for BARTG when using {LOGTHENPOP} (Coded by N2AMG)
Corrects double sending of TX window text when using macro buttons in DI (Coded by N2AMG)

Version 7.12.17 (Started March 12, 2008)
Disabled Skimmer filter code.

Version 7.12.16 (Started March 3, 2008)
Enables using Space to move stacked call from Callframe to Callsign box and remove from bandmap (Coded by N2AMG)
UBA Spring: correct points per QSO (Coded by ON5ZO)
Rotor: was forgetting where it was positioned last (G3VAO)
Rotor: show reverse offset as (R)
callsign.pat: HB3 calls now allowed on 160/80/15/10m (K1TTT) (Coded by K1TTT)
RDXC: Change Cabrillo id to RDXC (K1TTT)
PABEKER contests: fix length Regio to 2 digits (i.e. 1 becomes 01) (PH7A) (Coded by PA1M)
ALLASIACW/ALLASIASSB: Added default exchange(PA1M)
ARRL160: Added default exchange non US/VE stations (PA1M)
ARRLDXSSB/ARRLDXCW: Added points to log window (PA1M)
ARRLRTTY: Added default exchange + points to log window (K0RC) (Coded by PA1M)
BALTIC: Updated EW field order (K0RC) (Coded by PA1M)
BARTGSRTTY: Updated EW & log field order + added default exchange + url (K0RC) (Coded by PA1M)
BARTGRTTYS: Added default exchange + updated url (K0RC) (Coded by PA1M)
CISDXCW/CISDXSSB/CISDXRTTY: Added default exchange (PA1M)
SPRINTLADD: Updated url Sprintladder (K0RC) (Coded by PA1M)
RUSSIANDX Updated code Cabrillo header to RDXC (K1TTT) (Coded by PA1M)
Added option to remove Skimmer S&P spots
RussianDx: First check call history before entering default oblast (DL6KVA) (Coded by PA1M)
Bug fix: It was necessary to implemented the fix for “QSY wipes call” introduced in version 7.12.15 by a different technique. If you experienced the original bug please test this version and report any problems. (coded by K3CT)
Bug fix: Equal key used to send last message now works after executing {LOGTHENPOP}. If the first call can not be logged, the equal key will not send any message. (GM3SEK) (coded by K3CT)
Bug fix: In SO2V mode with VFOB the active, clearing split now clears split on the VFOA entry window at the same time. (coded by K3CT)
Bug fix: Corrected internal coding used to test for valid radio commands. (coded by K3CT)
Enhancement: Callsigns stacked by {SOCALLSTACK} can be popped off the stack by pressing the space bar when the CQ-Literal is on the call frame. (coded by K3CT & N2AMG)

Version 7.12.15 (Started March 3, 2008)
Rotor: fix runtime error when clicking between spots and choosing "turn rotor" (n6RK)
Count band changes even if not multi-user (W1QA)
Added 3K/VR for Russian DX Contest (RX9TX) (Coded by N2IC)
Digital - Implements Digital Call Stacking See Yahoo groups for usage (Coded by N2AMG and K3CT)
Digital - Corrects double sending of text in TX window when using MMTTY and pressing F-Key (Coded by N2AMG)
Digital - New digital macro substitution {LOGTHENGRAB} Logs current contact and grabs next call from Grab window (Coded by N2AMG)
Digital - Cleans up unneeded call look-ups on RX window mousemoves (Coded by N2AMG)
DigitalSetup - Adds setting for sending space after grabbing call from grab window (Coded by N2AMG)
Digitalsetup - Adds setting for adding dupes to Grab window or Not (Coded by N2AMG)
DigitalSetup - Adds ability to change color used for own callsign in RX window (Coded by N2AMG)
DigitalSetup - Adds ability to strip excess linefeeds from RX Window (Coded by N2AMG)
DigitalContests - Corrects prefilling of previous contact info in BARTGSRTTY and ANARTSRTTY (Coded by N2AMG)
DigitalContests - Updates BARTGSRTTY website link (Coded by N2AMG)
DigitalContests - Updates all digital contests on/off times (Thanks to K0RC) (Coded by N2AMG)
DigitalContests - Corrects SARTGNYRTTY for correct output to Managers (Coded by N2AMG)
Bug fix: Fixed macro substitutions string in SSB and Digital to include F-Keys F9-12 (Coded by N2AMG)
Bug fix: In CW, the {END} macro did not work with the F9 to F12 keys. (coded by K3CT)
Bug fix: In CW, the {MESSAGE} macro did not function after the {END} macro. (coded by K3CT)
Enhancement: Added ALT+F10 operation (exchange VFO) for the OmniVII. (WW7Y) (coded by K3CT)
Enhancement: Added CW-Reverse operation for the OmniVII. (W2NRA) (coded by K3CT)
Bug fix: FT-897 radio, modified the VFO commands to improve radio control. (many) (coded by K3CT)
Bug fix: Made improvements in the {SOCALLSTACK} and {LOGTHENPOP} macro CW operation. Details will be posted on the reflector and added to the manual. (coded by N2AMG & K3CT)
Enhancement: Added {STACKANOTHER} macro and CTRL+ALT+G to stack additional callsigns in all modes. (coded by N2AMG & K3CT)
Enhancement: Changed the {LOGTHENPOP} macro to only function in RUN mode. (coded by N2AMG & K3CT)
Bug fix: Orion mic muting when F2 & F5 each contained one space. (N1EU) (coded by K3CT)
Bug fix: With 40m phone splits and "QSY wipes call" enabled, callsign would be wiped on TX. (many) (coded by K3CT)
9ACW: Updated URL + updated EW field order (K0RC) (Coded by PA1M)
ALLASIACW/ALLASIASSB: Updated URL (K0RC) (Coded by PA1M)
ANARTSRTTY: Updated text Zone field Entry Window (K0RC) (Coded by PA1M)
ANATOLRTTY: Updated EW field order + added default exchange (K0RC) (Coded by PA1M)
ARCI: Updated URL(K0RC) (Coded by PA1M)
ARIDX: Updated URL + updated EW field order (K0RC) (Coded by PA1M)

Version 7.12.14 (Started February 29, 2008)
Rotor control was always sending commands to the default rotor, rather than the rotor for the band specified. (N3MX)

Version 7.12.13 (Started February 17, 2008)
Rotor program was not completely shutting down on XP systems (N2TU)
Changes for Georgia QSO Party (NE4S) (Coded by N2IC)
Callsign.pat: remove on2 from 'not on hf' warning... on1 remains vhf only (coded by K1MK)
Callsign.pat: remove e7 prefix error (coded by K1MK)
Callsign.pat: add h5,o*,S4,V9 prefix errors (coded by K1MK)
Callsign.pat: add warnings for 4n and yz prefixes that have been withdrawn from the itu allocation table (coded by K1MK)

Version 7.12.12 (Started February 8, 2008)
Added StationNr to freq broadcast information (WC1M)
Remove 9A vhf only license warning (W1UE) (Coded by K1TTT)

Version 7.12.11 (Started January 27, 2008)
CQ 160: Fixed start/stop time of contest (K1EP)
Stuck PTT when CTRL+K used to exit keyboard CW window (N5IA) (Coded by N2IC and K3CT)
Enhancement: Added separate radio entry for TS-2000 to allow control of antenna RX input. (W1TR)(coded by K3CT)
Enhancement: Added new macro {LOGTHENPOP} to log a call and pop the next call off the stack allowing series CW contacts. The suggested macro string is {LOGTHENPOP} TU NW {F5}{F2} (N4ZR) (coded by K3CT)

Version 7.12.8 (Started January 21, 2008)
Available: Experimental feature. Mark stations near sunrise/sunset in direction column of available window.
Corrects macro’s from executing when loading or saving in the digital setup (Coded by N2AMG)
Bug fix: FT1000MP and possibly other non-Kenwood & non-Icom radios, fixed clearing split when clicking in bandmap and keyboard command. (K1TTT) (Coded by K3CT)

Version 7.12.7 (Started January 20, 2008)
Bug fix: PTT did not un-key when some macros were executed while program was sending CW. (N8RA) (Coded by N2IC & K3CT)
Improvement: Changed the DTR/RTS text hint for several radios in Com port setup window. (W4TV) (Coded by K3CT)
Enhancement: Added a new feature called single operator callsign stacking. Enabled with new {SOCALLSTACK} macro. (Coded by K3CT)
Enhancement: Added ability to change radio antenna selection and toggle RX antenna (radio dependent). Selected with new {ANTRX1TOGGLE} to {ANTRX4TOGGLE} macros. Kenwood support will be improved in a later release. (PA1T) (Coded by K3CT)
Enhancement: Added ability to send Hex, ASCII, and ASCII w/Hex radio commands to each radio with new {CAT1HEX}, {CAT2HEX}, {CAT1ASC}, and {CAT2ASC} macros. (Coded by K3CT)
Improvement: User manual updated with the new macro command descriptions. (Updates by PA1M)
UBA Winter: was not changing mults to blue after working another station in that country (ON5ZO)

Version 7.12.6 (Started January 3, 2008)
MK2R: set Active radio number at startup (N4ZR)
Digital - Corrects CTRL-K from not stopping TX (K0RC) (Coded by N2AMG)
DigitalSetup - Corrects issue where if loading a macro file that contained under 26 macro's into the Other
Macro's Caused a DB Error when trying to edit the Other macro's.
Rotor: don't send messages about rotor position if rotor is not moving (UA6LJB)
HADX: Only county allowed as exchange fro HA-stations (HA1AH) (Coded by PA1M)

Version 7.12.5 (Started December 29, 2007)
SPRINTLADD: Exchange uses first text from Name field in Station dialog (K0XP) (Coded by PA1M)
RAC: Rules URL change. (VE6LB) (Coded by K3CT)
Radio timeout: Fixed a CW mode radio timeout bug introduced in V7.12.4. (K1EP) (Coded by K3CT)
Radio timeout: Eliminated timeout when the radio tuning key was held down longer than the radio timeout value. (VE1DT) (Coded by K3CT)
MK2R: Send "FT1" at startup (N4ZR)
Stew Perry: Show sum of points (K1EP) (Coded by PA1M)
Stew Perry: Start time corrected (K1EP) (Coded by PA1M)
Operator category added to Score summery report (K1TTT)Fix import problem in call history import function (DK2ZO)(Coded by PA1M)

Version 7.12.4 (Started December 21, 2007)
Fixes incorrect counting of USA/VE mults (PC5M) (Coded by N2IC)
Allow import/export from the lookup table edit dialog
JAdomestic: Multiplier should count per band, not per mode (JE1CKA)
JAdomestic: Added mode to log window (PA1M)
JAdomestic: When SentExchange does not end on H,L,M or P then no Powercode check (JE1CKA)
Fixed ARRL 160m ADIF string. (K1EP) (Coded by K3CT)
Added FT-950 & IC-7700 radio control (untested). (Coded by K3CT)
Bug fix, prevent program crash if INI file doesn't contain anything in the LPT section. (Coded by K3CT)
Reduced the program overhead of the suspend radio timeout added in version 7.11.3. (Coded by K3CT)
Bug fix, eleminate program crash if FT2000 selected and Icom radio connected. (Coded by K3CT)
Callsign patterns: Reverse logic for vk foundation class calls.. 4 letter suffixes must start with f. (Coded by K1TTT)
Callsign patterns: Exempt j3,d2,d4,c4 from the call too short and 2 numbers in prefix rules (Coded by K1TTT)
9ACW: set days of contest to 1 (Coded by EA7GV)
9ACW: Set start of contest to 14:00 (Coded by EA7GV)
KINGEA: Updated points score (Coded by EA7GV)
Corrects double sending of Type ahead buffer in DI windows when using TX button (Coded by N2AMG)
Fix the autofill of gridlocator is broken (PC5M)
CQ 160: mult does not show in mult window if a non-standard abbreviation is entered (PC5M)
OKOMRTTY: incorrect zone used with {LOG} macro (K0RC) (coded by PA1M)
VHFREG1 - bug fix callhistory lookup (PC5M) (coded by PA1M)

Version 7.12.1 (Started December 9, 2007)
Rewrite {File:xxxx} macro code for working as follows: (Coded by N2AMG)
1.Now works anyplace in macro string
2.If textfile only contains one line does not add CR to end of line
3.When text file is multi lined removes CR from last line so following text will be on same line
4.Allows multiple {file:xxxx} in one macro string.
Eliminates jumping of frequency display in MMVARI waterfall (Coded by N2AMG)
Corrects problem when using MMTTY. Would not send typed ahead text from TX window before sending F-Key macro (Coded by N2AMG)
Removes 80 character limit in Digital macro's. Now same length as F-Keys (255 characters) (Coded by N2AMG)
Show bearing for beacons (K0RC)
Fixes erroneous focus shift when callsign contains "?" in non-focus window. (K3CT) (Coded by N2IC)
Goals: allow fetching goals from other databases and contests
Goals: support goals for the entire contest rather than one day at a time.
Quickedit would lose spot in bandmap (many)

Version 7.12.0 (Started December 9, 2007)
Callhist: compute direction after determining state
Fix a situation where FocusOther stops working if {CTRLFx} is toggled while sending CW. (Coded by N2IC)
UBAWINTER: Allow logging DX with serials and ON with sections (Coded by ON5ZO)

Version 7.11.4 (Started December 1, 2007)
Added configurable dueling CQ delay.
Fixed PTT not keying when {CTRLFx} in message.
Allow self-spots when set/nodx_announcements set on DX spotting node.
Changing a callsign would cause it to not be found in dupe pane (K1TTT)
Fix for Callhist missing state when loading (PC5M)

Version 7.11.3 (Started November 30, 2007)
CW WIndow: Eliminate runtime error if ctl-tab pressed (K0RC)
ARRL 160: Lookup section when space pressed (many)
Corrected SO1V tool tip. (Coded by K3CT)
Improved the COM port setup caption text, now radio/brand dependent. (Coded by K3CT)
Added Yaesu FT-757GXII radio. (Coded by K3CT)
Made changes to prevent radio timeouts during exports and open dialog windows. (Coded by K3CT)
Corrected improper radio port configuration on Configurer exit that required second entry & exit. (Coded by K3CT)
Eliminated Run Time Error when Icom radio wasn't communicating on Configurer exit. (Coded by K3CT)
Eliminated program crash on Ctrl+K after restoring program from the toolbar. (Coded by K3CT)
Added radio command logging option for radio debugging. (Coded by K3CT)
Added error checking of RadioType code stored in *INI file preventing program crash. (Coded by K3CT)
Corrected radio command strings for FT-897, FT-840, FT-DX9000, FT-847. (Coded by K3CT)
Added ALT+F12 and ALT+F10 operation for IC-781 and IC-775. Other SO2V changes planned. (Coded by K3CT)
Corrected FT-2000 & FT-DX9000 bugs that surfaced when bandmap clicking of split/nosplit spots. (Coded by K3CT)
Corrected Icom radio CI-V timeout. Earlier versions did not time out when the radio communications ended. (Coded by K3CT)
Minor fixes made in the polling routines for FT-817, FT-879, FT-847. (Coded by K3CT)
Corrected Icom Dual Watch code for SO2R when one radio was not DW capable. (Coded by K3CT)
Minor changes made to improve Icom SO1V/2V bandmap click/VFO frequency operation. (Coded by K3CT)
Removed an incorrect IC-775 RIT command. (Coded by K3CT)

Version 7.11.2 (Started November 23, 2007)
Multi-op: added error dialog when station connects from an unexpected ip address
Correcets problem of garbled text appearing somtimes when transmitting with MMVARI (Coded by N2AMG)
Corrects bug when saving soundcard settings in MMVARI. This caused soundcard settings not saving. (Coded by N2AMG)
Adds Error checking to MMVARI sound routines to make sure the soundcard selected is not higher than the
number of soundcards in the computer which was causing an error. (Coded by N2AMG)
Adds {CLRRX} to clear the RX window. This is used either alone in a macro or after an {END} macro. (Coded by N2AMG)
Corrects error in PSK Engine window re-size code which was causing the contents of the engine to not be shown. (Coded by N2AMG)
WAERTTY - Adds line spacing to end of QTC being sent individually. Uses same spacing as set when sending whole groups (Coded by N2AMG)
WAERTTY - Corrects bug of first character of QTC group being cut off when QTC contained a space for seperator. (Coded by N2AMG)
WAERTTY - When QTC window is open do not add calls to Grab window. (Coded by N2AMG)
When DI is in Transmit do not add calls to Grab window. (Coded by N2AMG)

Version 7.11.1 (Started November 22, 2007)
ARRLSS: Fixes overflow error when invalid check is accidentally entered.(Coded by N2IC)
CWJFMM: Updated cabrillo (PY8AZT) (coded by PA1M)
CQWW: Don't count zone mult twice for /MM stations (coded by PA1M)

Version 7.11.0 (Started November 5, 2007)
Require setting station 1 or 2 for multi-two each time the program is loaded or contest changed.
When resyncing, change all Delted Qs in the target database for the source computer by increasing the timestamp by one second. This allows QSOs from the source computer to be placed on the target computer even if the same date and time as deleted ones. (PA5CA, 9A3OS)
Change exit to close rotor com ports when 'X' pressed, not just File/Exit.

Version 7.10.12 (Started November 2, 2007)
SS: Quickedit would not allow update of call without changing exchange (K9CT)

Version 7.10.11 (Started October 29, 2007)
Split and dupe labels are misaligned
Changed export cabrillo to offer option to edit cabrillo file.
Multi-User: Non-CQ frequency changes were being sent to other computers (K1TTT)
Call History: Fix 3022 runtime error when dupes in call history file. Last line with duplicate call will be used (N4ZR)
Call History: Fix runtime error 13 when birthdate is null (N4ZR)

Version 7.10.10 (Started October 26, 2007)
Bug fix for the Icom SO2R LSB mode error. (EA3KU) (Coded by K3CT)

Version 7.10.9 (Started October 22, 2007)
Fix errorhandler in mnu_ReloadCTYDAT_Click (Gw3NJW)
Call history: fixed errors with zero-length calls, sections and states (N4ZR)
Allow record-on-the fly within the program for MK2R serial users. (N4ZR)

Version 7.10.7 (Started October 14, 2007)
Available: fix sort order to sort on time (K1TTT)
Contact Broadcast: not all contact fields were filled with information (PC5M) (Coded by PA1M)
Volta: use DXCC list of countries (I2DMI)
Rotor, non-Vista: restore icon to rotor program (PA1M)
Rotor: added "Always on Top" as option (Coded by PA1M)
Changed "Show Google" to "Show Google (Internet)" (PA1M)
Changed ALT+F11 text wording (Coded by K3CT)
CW Window: made multiline and allowed vertical sizing (N4ZR)
CW Window: made font type and size same as entrywindow (N4ZR)

Version 7.10.6 (Started October 11, 2007)
Allow frequencies starting with "0." to be entered.
Reverted to the original K2 swap VFO operation (Coded by K3CT)
Fix broadcasts for contact information (Coded by PA1M)
Force winkey & mk2r selections to be off if digital or radio selected (W4TV)
Force MK2R selection off if CW/Other is turned off
Change CW/PTT to CW/Other (W4TV)
Added 30/60 minute label to KI4MCW's graph control
Added goal value marking line in KI4MCW's graph control

Version 7.10.5 (Started October 7, 2007)
DIG: Station may only be worked once per Band (PA0MIR)(coded by PA1M)
PAC was incorrectly considered CA (AH6RE)
PA QSO Party: fixes VE multipliers (Coded by N2IC)
Beacons: Skip importing dupe beacon or invalid gridsquare (PA5DD) (coded by PA1M)
ADIF: Added TX_PWR import and export (G3VAO) (Coded by PA1M)
Set winkey to false if a radio is selected. (W4TV)
Fix r/t error with UDPClient (reported as MailClient)
Added icon back to installation (PA1M)
K2 & K3 ALT+F10 swap VFO added (Coded by K3CT)
Improvements to the Kenwood/K2/K3/TS-940 split routine release earlier. SO2R does not change TX VFO mode on split. (Coded by K3CT)
If you select File | New Database followed by File | New Log in Database. The caption lists the old database name which is confusing. (Coded by K3CT)

Version 7.10.3 (Started October 2, 2007)
Fixed r/t 3027 while loading call history (Coded by EA7GV)
CNCW: changed SectionADIFName to STATE because for ADIF-2 (Coded by EA7GV)
Added two broadcasts (PC5M) (Coded by PA1M)
IsBroadcastAppInfo - Broadcasts contest information (database, contestNr and contestname) when the contest dialog is closed (New and Open Log in Database)
IsBroadcastContact - Broadcasts qso information when a qso is logged
Hide some View menu options when no valid callsign in call textbox or callframe
Added NOVICE-TECH as an overlay category (PA1M)
Renames REG1TEST to EDI in menu (Coded by DL5MO)
New fields in StationDialog.frm and table Station respectively to complete EDI export (Coded by DL5MO)
Contents of fields filled into EDI-File completed (Coded by DL5MO)
EDI: Export content for MOpe1 and MOpe2 only if not SINGLE-OP (for log robots qual. reports) Msgbox changed as warning not longer needed, Fields STXEq, SRXEq, SPOwe, SAnte, SAntH filled correctly (Coded by DL5MO)
Changes regarding DUPE again inserted (Coded by DL5MO)
B0883: ALT+F7 with TS-940 incorrect VFO & split operation (Coded by K3CT)
B0969: Kenwood not logging frequency correctly VFOB (Coded by K3CT)
B0613: K2 Ctrl-Up/dn spot grabbing (Coded by K3CT)
TS-940 fixed split from VFO-B in SO2V (Coded by K3CT)
K2 fixed split from VFOB in SO2V (Coded by K3CT)
K2 changed default filter settings (Coded by K3CT)
Added Elecraft K3 radio for SO1V & SO2R (Coded by K3CT)
Updates to score reporting needed for current score reporting site (Coded by K1TTT)
Show beam direction when turning rotor (anywhere on network) (PA1M)
Mult window: Fix for r/t error. (Coded by N2IC)

Version 7.10.0 (Started September 22, 2007)
PACC: Implemented 2008 rule change and cabrillo output (PF5X) (Coded by PA1M)
CISDX: added Sent Nr to log window (K1TTT)
Allow repeat CQ to work with external DVK. Note: With an external DVK, the repeat timer starts when the message begins (Coded by N2IC)
Don't prompt for reset radios after setting font.
Fix for a problem with {CTRLFx} causing PTT to be momentarily asserted on the wrong radio. (Coded by N2IC)
PACC: Fixed bug in Asiatic Russia multiplier (PF5X)(Coded by PA1M)
B0969 - N1MM Logger not logging correct frequency for VFO B (K6LL) (Coded by N2IC)
Don't make default state when importing call history "N/A" (many)
Fix the Multiplier Window for VE mults for the PAQP (Coded by N2IC)
Added Icom radio IC-7000 (Coded by K3CT)
Fix program crash when OmniVII selected & RIT/XIT clicked in bandmap (Coded by K3CT)
Changed ALT+F11 window text to be informative (Coded by K3CT)
Fixed bugs # 862 & #852. (Coded by K3CT)
Clear pre-existing split on Mults & Q's band button click, bandmap frequency click, packet spot, Ctrl-PgUp, Ctrl-PgDn
Click on main frequency in bandmap will set/clear split

Version 7.9.4 (Started September 16, 2007)
Change method of writing booleans to ini file (internationalization issue) (I2DMI)
Fix for creeping CQ-Freq when there is another spot within the tuning tolerance (many)
Alt-F7 If you hit enter or click OK with nothing on the line it clears split. If you want to exit, press ESC or click Cancel. (Coded by K3CT)
OmniVII RTTY radio code change. (Coded by K3CT)
IC-746/IC 746Pro split and swap radio command fixes. (Coded by K3CT)
Icom 756/Pro/II/III, IC7800 switch VFO fix for "SO2V" mode. Ctrl-left/right and PAUSE will enable dual watch & enable the SUB TX. Dual watch is left on if Config | "Dual Watch Always on" is checked. Not tested on IC-7800. No changes made in the SO1V mode operation. (Coded by K3CT)
Alt+F10 swap VFO for "SO2V" mode for Icom's and other rigs that support Exchange VFO's. This should include the Yeasu FT897, FT1000MP, FT1000. Only tested on IC-746 & IC-756Pro3. No changes made in the SO1V mode operation. (Coded by K3CT)

Version 7.9.3 (Started September 14, 2007)
{CtrlFn} function was broken in 7.9.3 (SM5AJV)
DX: was not showing mults correctly (VO1HE)
Changed County file load msgbox to a status bar message (K1TTT)
FT-2000, FTDX-9000: support dual rx (W4TV)

Version 7.9.2 (Started September 9, 2007)
Omni VII: first pass at correcting run time errors (W2NRA)
Omni VII: change split code to "N" rather than "O" (W2NRA)
Omni VII: change command to switch both VFOs to RTTY (W2NRA) (Coded by K3CT)
Sprint: log section with "official" section designation (N4ZR)
TN Qso Party: correct scoring (WA4PGM)
TN Qso Party: make mults once per band (N2CU)
Exchange Frame: adjust headings to match alignment of exchange textboxes when resized. This is dependent on how the exchange explanation text is formatted for the contests. There will be fallout contest by contest, but it will generally be easy to fix. (N4ZR)
MMVARI- Corrects 100 % CPU Usage when transmitting (Coded by N2AMG)
MMVARI- Corrects channel waterfalls display when using a FFT Type of Db (Coded by N2AMG)
MMVARI- Corrects resize calculation that was cutting off some windows (Coded by N2AMG)
MMVARI- Rewrites Soundcard setup to select input and output soundcards (Coded by N2AMG)
Corrects Russian DX Contest so OBLAST does not change to zone (Coded by N2AMG)
Changes Oblast mult to count OncePerContest in RUCUPRTTY (Coded by N2AMG)
Removes 599 when clicking on exchanges of 599xxx when sending the exchange to Entry Window. (Coded by N2AMG)

Version 7.9.1 (Started September 8, 2007)
{CTRLFn} macro was being parsed incorrectly
Available window: clicking on a mult was setting normal mode rather than choice selected in Configurer mode tab
LOTW: added contest (Coded by PA1M)
Icom: was not resetting to VFO A after exiting the Configurer (Coded by K3CT)

Version 7.9.0 (Started August 29, 2007)
Ohio QSO Party: don't allow dx as a mult (KV8Q)
Fixe intermittent SO2R break-in of 2nd radio CW (Coded by N2IC)
B0896: CQP - Fixed erroneous counting of DX multipliers (coded by N2IC)
B0927: PA QSO Party - corrected VE multipliers (coded by N2IC)
Fix beacons code (Coded by PA1M)
Eliminate most messages about resetting radios resulting from dialog boxes

Version 7.8.11 (Started August 21, 2007)
RDA: Change mults for DXCC entities to per band (RX9TX)
Corrects problem in MMVARI Setup of not saving soundcards above #4 (Coded by N2AMG)
Graphs added (Coded by KI4MCW)

Version 7.8.7 (Started August 11, 2007)
MK2R: do not send stop DVK command unless in SSB (W4TV)
WAE: Add E7 to list of valid WAE countries (K1TTTT)
Rotor: Remove icon if running Vista to prevent memory leak (PA5CW)
WAE: Use continent from cty.dat to determine Europe
DIG: Finish adding contest (coded by PA1M)

Version 7.8.5 (Started August 9, 2007)
MK2R: do not send DVK commands unless in SSB (W4TV)
WAE: Add 4O to list of valid WAE countries (many)

Version 7.8.4 (Started August 9, 2007)
WAE: Fix unsent QTC calculation (ON5ZO)

Version 7.8.3 (Started August 6, 2007)
FT-897 & FT-817 - Comm buffer overrun, con't (fix for v7.8.1 timeout)
WAE: Fix for QTC numbering (RG9A/UA9AM)
Macros: show name of missing file when not found (N4ZR)

Version 7.8.1 (Started August 1, 2007)
IOTA: require a non-zero serial number (VE3FH)
VHFHELV26 - new VHF/UHF Helvetia 26 contest (request Walter, HB9TLX) (Coded by PA1M)
FT-897, FT-817: Clear radio com buffer prior to polling (fix for r/t 13 error) (Coded by KI4MCW)
DIG: New contest DIGCW and DIGSSB (request PA0MIR and DL5ME) (Coded by PA1M)
B0777 - FT-897 - "Always PSK31" mode setting gives R/T 13 error whenever you click on a spot (Coded by KI4MCW)
B0975 - FT-857 CAT problem when clicking on call in bandmap window (Coded by KI4MCW)

Version 7.8.0 (Started July 28, 2007)
Beacons (Coded by PA1M):
- made the time configurable beacons stay in bandmap (first line in beacons.txt file)
- the bearing to the beacon is now calculated by the program (tnx Uffe, PA5DD)
- comma is no longer a valid separator (gave problems with frequency (144412,2 and/or 133412.2)
- frequency with a . changed to , (program changed 144400.5 to 1444005 i.e. freq without a .)
Visible dupesheet: don't allow more than one instance (W1MK)
Don't turn to grid square if station grid square is missing (PA1T)
Rotor was turning to callsign interpreted as gridsquare instead of gridsquare (PA1T)

Version 7.7.12 (Started July 23, 2007)
ESM: Runtime error 9 if dialog box open when callsign finishes sending (K4RO)
IOTA: Only show islands worked (N4ZR)
Check: clear caption when available window closed (N4ZR)
Fixed 160 meter Visible Dupesheet display (Coded by N2IC)
Fixed duplicate Visible Dupesheet's when user repeats Window->Visible Dupesheet (Coded by N2IC)

Version 7.7.8 (Started July 19, 2007)
Omni-VII: remove erroneous xit/rit codes (W2NRA)
MK2R: DVK checkbox would not save (W4TV)
MK2R: changed tool tip on MK2R checkbox (W4TV)
MK2R: added record / stop record functionality (W4TV)
Visible Dupesheet: don't show in taskbar
Do not set icon for program if Vista (SA6AQP)
Corrects {OTHERFREQ} macro in digital modes. (Coded by N2AMG)
Visual Dupesheet: Increased number of QSO's per band to 300 (Coded by N2IC)
Visual Dupesheet: Gracefully handle excessive QSO's per band (Coded by N2IC)

Version 7.7.7 (Started July 15, 2007)
Available: added mode to display
Many changes to resizing code to accomodate wider default borders in Vista. Code should not increase wasted space in non-Vista OS's, however many code changes were made, so expect some fallout.
MK2R: Added serial port support (PA1M)
IARU: Correct some errors in Suspect Zones report. All W/VE zones will be ignored.
IARU: ADIF fix for zones/HQ export (Coded by EA7GV)
Check: Alt-Y would return empty string on first press (RX9TX)
Visible Dupesheet: Fixes RT error (N4ZR) (Coded by N2IC)
Visible Dupesheet: Smaller font and default window size to allow more calls in each column (Coded by N2IC)
MK2R: Allow checking/unchecking of DVK option (W4TV)
MK2R: MK2R box was not being set on load (N4ZR, W4TV)
MK2R: Disabled setting PTT (N4ZR)

Version 7.7.2 (Started July 13, 2007)
IARU: Fix for realtime scoring (W1VE)
Visible Dupesheet: changes to save and restore windows.
Visible Dupesheet: added error message if there are more than 200 calls in a single column.
RAC: fix for contest abbreviations (coded by VE6JY)

Version 7.7.1 (Started July 6, 2007)
B0860: If you open the import cluster list file selection and cancel you get a "can't find file" message; import not canceled by cancelling dialog (K1TTT) (Coded by DL5MO)
B0864: When exception calls in wl_cty.dat do not have a number in leading portable designator (e.g. MM/DL1CW), lookups of home call get the exception QTH (N3RD, VE6WA) (Coded by DL5MO)
Omni 7: Split out Omni VII as separate radio
Omni 7: Handle bandwidth for Omni VII in Omni VII-specific manner (W2NRA)
Omni 7: Handle Omni 7's CW-R and RTTY responses to mode query (W2NRA)
Rotor: turn to grid if one specified (PA1T)

Version 7.7.0 (Started July 1, 2007)
Jupiter/Omni 7: added rtty mode code. Should work only for Omni 7 (W2NRA)
RAC: correct start of contest to July 1 (K0XP)
NA Sprint: Visible dupesheet added (coded by N2IC)
Winkey: Ignore winkey speedpot option added (coded by N2IC)

Version 7.6.0 (Started June 16, 2007)
Correct ADIF Band output for a number of vhf bands (KI4TZ)
CNCW, EARTTY, KINGEA: Correct start and/or end times for contests. (coded by EA7GV)
IOTA: Updated valid island list. (provided by G3TKF)
Sprint Ladder: Changed scoring to mults per band (KZ5D)

Version 7.5.10 (Started June 15, 2007)
Focus was jumping to the packet window (many)

Version 7.5.9 (Started June 3, 2007)
Added new menu item for multi-op that disables automatic change to S&P when QSY. Useful when there is more than one radio on the same band.
NA Sprint Ladder: added contest. Eliminated dupe checking for this contest.
Added "G" to gigaHertz frequencies in cabrillo output (W1TR)
Focus was jumping to entry window when spots arrived, causing logger to overlay other windows (many)

Version 7.5.7 (Started May 29, 2007)
Disable edit button while in quickedit (W2EQ)
Disable click in log window while in quickedit (W2EQ)
Don't use DLPORTIO to read serial port before turning CW port on/off (W7ZR)
Fixed 10 minute multi-single timer to work independently for run and mult stations (Coded by N2IC)
Multi-single transmitter lockout now configurable using "Force Other Station to Stop Transmitting..." flag (Coded by N2IC)
ARI, CQM, VHFREG1, WAG, XMAS: Change off time from 0 to 30 default for those who want to report off times in these contests, even though the contest does not have minimum off times established (EA4WC)
Packet Window: Show correct timeout when packet spot changed from Bandmap (K0RC)

Version 7.5.6 (Started May 26, 2007)
Fixed QSY automatically changes from Run to S&P for multi-ops (Coded by N2IC)
Bandmap: deleting a spot in Avail window would cause ctl-up/down to go to edge of bands (W7ZR)
Bandmap: deleting a spot would not reliably show correct spot in callframe.

Version 7.5.5 (Started May 18, 2007)
Fixed program hang when serial port or USB device not attached (Coded by N2IC)
Fixed erratic paddle speed when using paddle to interrupt CW message (Coded by N2IC)

Version 7.5.4 (Started May 14, 2007)
Remove ini file from distribution (many)
ARIDX: Bug fixed in cabrillo (2nd try). (IT9BLB) (coded by PA1M)

Version 7.5.3 (Started May 12, 2007)
ARIDX: Fix cabrillo for I stations (IT9BLB) (coded by PA1M).
Icon for program was inadvertantly deleted (W1RM)

Version 7.5.2 (Started May 11, 2007)
Time change (Tnnnn) function was changing date to current date (Coded by PA1M)
CQM: Fix bug found (Coded by NA3M)
ARI: Didn't force reload of mults (N1MM)

Version 7.5.1 (Started May 5, 2007)
ARI: Fixed section list (W3LL)
CQM: updated support for new rules (coded by NA3M)

Version 7.5.0 (Started April 23, 2007)
JIDX: fix 160 points (JE1CKA)
Multiplier: Show mults on right click now also looks at the selected mode (CX6VM) (Coded by PA1M)
SPDX RTTY: Added SentNr to log non-SP stations (VE3FH)
PACC: Accept RSGB 160 mtr contest exchange (only) on 160 mtr (PA7LV) (Coded by PA1M)
PACC: If Province/SentExchange > 2 characters then ?? in log (Coded by PA1M)
Fix for beacons code (Coded by PA1M)

Version 7.4.2 (Started April 17, 2007)
IARU/WRTC: non US station with /W /K /A /N gives error (SM3WMV) (Coded by PA1M)
JIDX: CW allowed on 160 mtr (VE7CC) (Coded by PA1M)
B0961 - Spotting a split frequency dupe without QSY incorrectly cleared call field (K1TTT) (Coded by N2IC).
Multiplier: Show mults on right click only for bands selected for viewing (Coded by PA1M)

Version 7.4.1 (Started April 11, 2007)
Made upgrade installer Vista-aware (Coded by PA1M)
SO2R: CQing with windows minimized would cause a runtime error (ON5ZO)
Added beacons code (coded by PA1M)

Version 7.4.0 (Started April 6, 2007)
Multi user mode, IARU contest - Run stations on the same band different modes do not reset Run check box of each other (SM3WMV) (coded by NA3M)
Foot switch - added "Normal" mode for clarity (coded by NA3M)
Foot switch - set focus to main window when foot switch depressed in "Normal" mode (PA5DD) (coded by NA3M)
Foot switch - minor bug fixed in Config Dialog (coded by NA3M)

Version 7.3.9 (Started April 2, 2007)
Indiana QSO Party - Use 50S13P multiplier list (Coded by N2IC)
Indiana QSO Party - Mults are once per mode (Coded by N2IC)
Florida QSO Party - Add DC multiplier (Coded by N2IC)
Colorado QSO Party - Use 50S14P multiplier list (Coded by N2IC)

Version 7.3.8 (Started March 24, 2007)
Load correct default settings file to correct error in Config Dialog (NA3M)

Version 7.3.7 (Started March 24, 2007)
Allow ESC as a stop for recording wav files (S55OO)
EDI: Added bands and other fixes (coded by DL5MO)
Indiana QSO Party - Incorrect Cabrillo output has been fixed (coded by N2IC)
UBA contest: Update UBASECT.sec file (ON7RK) (coded by PA1M)
The foot switch is configurable now, it can be connected to LPT or Comm ports. (coded by NA3M)

Version 7.3.6 (Started March 20, 2007)
Fix sunrise/sunset times to match state/province/call area (W1RM)
Rotor: turn off polling when error occurs.
Ontario QSO Party - rule changes implemented (coded by N2IC)
Virginia QSO Party - fixed in/out-state mobile scoring (coded by N2IC)
B0839 - Incorrect Cabrillo output for FQP fixed (coded by N2IC)
Implemented FocusOther for SSB (coded by N2IC)
Changed default for CTRLFx macro toggle to "off" (GW3NJW) (coded by N2IC)

Version 7.3.5 (Started March 17, 2007)
Russian DX: Don't change oblast if already entered (N4ZR)

Version 7.3.4 (Started March 17, 2007)
Russian DX: Change band change limit to 8 (K1TTT)

Version 7.3.3 (Started March 15, 2007)
BARTG: Changes to how {TIME2} is set (coded by N2AMG)

Version 7.3.2 (Started March 8, 2007)
Bandmap: Remove underline from Wide/Nar button (K9KDR)
Rotor: Fix for Prosistel C code (coded by EA1EVR)
Footswitch was not properly handling two radios (K1TTT)
Russian DX: fixed web link (K1TTT)
Fix handling of PTT in WK2 (W4TV)
Corrects problem of MMTTY PTT port switching after leaving digital setup. (Coded by N2AMG)
Adds Paste to Rt Click menu of TX Window (Coded by N2AMG)
Corrects problem when usingMaster.dta callsign routines from not coloring correctly (Coded by N2AMG)
Adds the ability to pull Callsigns (Listed in the Master.dta file) from Garbage Text Strings in the DI RX Windows (Coded by N2AMG)
1. If 2 calls are found in the same String the last one gets highlighted.
2. Highlighted calls in text strings are clickable.

Version 7.3.1 (Started March 5, 2007)
Rotor: Coded & tested Prosistel C code (coded by EA1EVR)
UBAspring: Fixed several issues with logging and file export (ON4AEB) (coded by PA1M)
RDAC: Updated RDAC.SEC file - all SH mults replaced with YA (RX9TX) (Coded by PA1M)
RDAC: Working /A and /M stations (for Russian stations only) = 10 points (RX9TX) (Coded by PA1M)

Version 7.3.0 (Started February 25, 2007)
Corrects problem of not picking up {ProfileX} if case was mixed (Coded by N2AMG)
Corrects problems with Net and AFC on off problems in DI2 (Coded by N2AMG)
Corrects problem of MMVARI on Top setting not being remembered in Digital Setup (Coded by N2AMG)
Adds PSK125 to supported modes (Coded by N2AMG)
Corrects problem of Selected mode not logging properly in MMVARI Engines (Coded by N2AMG)
Corrects not highlighting callsigns on 1st row od DI's (Coded by N2AMG)
Corrects problem of cutting off first leeters when calls are put into Grab window (Coded by N2AMG)
Adds linefeed before sending corrected call (Coded by N2AMG)
Winkey: fix condition where trailing speed changes in messages sometimes cause ptt to hang (W1HIS)

Version 7.1.7 (Started February 11, 2007)
Sprint: don't let section extend past right edge of window
Entry: Make font in callframe same type (but not size) as textboxes. If Arial is font, callframe remains MS Sans Serif (many)
CO QSO Party added (N0EOP)
Update callsign rules for VK based upon the ACMA rules (coded by K1MK)
B0911: FT-2000 does not go split on proper frequencies
FT-2000: Fixed flashing caption on entry window when RIT is on
Winkey: Clear buffer before starting every message
Rotor: Open ports only once at startup

Version 7.1.5 (Started February 6, 2007)
MN QSO Party: Fix Cabrillo output (NS9I)
MN QSO Party: DX contacts don't count for mults (N2CU)
Bandmap: all VE calls have zero as beam heading (VE6WA)
Rotor: Added Prosistel C protocol (EA1EVR)
Packet: changed spot filter to consider mixed as "not digi" when filtering by mode.

Version 7.1.4 (Started February 1, 2007)
Ctrl-F with empty log causes runtime error (K1TTT)
Available: Change formatting of title bar
Added op call and running boolean to data broadcast if IsBroadcastRadio is specified (PC5M)
CQ 160: restore separate section & country totals (many)
Bandmap: Added USA/VE beam headings.
Fixed error in beam heading calculation. (M0CKE)

Version 7.1.3 (Started January 27, 2007)
CQ 160: Correct mult calculation (K1TTT)
B0878: with no radio attached, clicking on run led does not switch run/s&p messages (K3CT, VE6WA)
CQ 160: Fix start & stop time for contest (K1EP)
Windows come to top at end of repeating CQ even if not SO2R (K8JQ)
B0848: Improve scrolling of packet & telnet windows (W5UN)
Calculate directions to US & VE callareas and states/provinces more accurately.
Changes layout of PSK Engines to make minimium size smaller (Coded by N2AMG)
Fixed Clear RX Button in DI1 (Coded by N2AMG)
Removes Case Sensititivity when using {ProfileX} macro's (Coded by N2AMG)

Version 7.1.1 (Started January 27, 2007)
BARTG Sprint: Correct scoring error (Coded by N2AMG)

Version 7.1.0 (Started January 23, 2007)
B0905: R/T 13 when Alt-Q pressed and radio is split (K1TTT)
B0921: FT-9000/2000: {CLEARRIT} was setting radio to packet (W1MU)
Rotor: Fix R/T error in setup dialog.
Support Winkey weight command (but with same 30-70% limit as com/lpt sending)
B0933: Call history export not getting updated from current log (K1MK)
B0894, B0932: Call hist goes looks up section rather than state in NAQP and many QSO parties (K6EU)
When loading call history set an unknown state to the state for a known section

Version 7.0.1 (Started January 19, 2007)
Rotor: default name of rotor to rotor type
B0924: Fix problem with sending on VFO B (Coded by N2IC)

Version 7.0.0 (Started January 15, 2007)
FocusOther gets permanently disabled if CTRLFx toggle is turned off while CW message is being sent. (Coded by N2IC)
Restore dual recieve toggle to Alt-F12 from Ctrl-Alt-F12 (N3KS)
F0323 WAE All Modes- When tuning in bandmap displays QTC Status in EW of tuned callsign (Coded by N2AMG)
B0895 Corrects scoring of UA9 stations in CISDXRTTY Contest (Coded by N2AMG)
Corrects RT 13 Type Mismatch error in MMVARI (Coded by N2AMG)
Corrects RT91 Error when using TNC Software Control and not having Digital port selected (Coded by N2AMG)